SBLF 205-16 Pillow Block Bearing

 If the bearing seat is equipped with neutron control, pay attention to absolutely prohibit the joint phenomenon of the signal line between the die casting machine and the bearing seat, the reason is clear, in daily production, it is difficult to avoid water on the signal line, or the place where the joint is wrapped is easy to break, resulting in short contact with the machine tool, if the signal is wrong, the light alarm automatic shutdown delay time, the heavy signal disorder, Break the bearing seat. Cause unnecessary loss. Travel switch pay attention to waterproof.

Main Dimensions & Performance Data

Dimensions

Calculation factors

Insert spherical bearings are preferred for applications requiring simple equipment and parts, such as agricultural machinery, transportation systems or construction machinery.

It is mainly used to bear combined radial and axial loads mainly based on radial loads. Generally, it is not suitable to bear the axial load alone. Bearings of this type can be fitted with an inner ring (with a complete set of rollers and cages) and an outer ring. This type of bearing does not allow the shaft to tilt relative to the housing, and additional axial forces are generated under radial loads. The axial clearance of this kind of bearing has a great influence on whether the bearing can work normally. If the axial clearance is too small, the temperature will rise; when the axial clearance is large, the bearing is easily damaged. Therefore, special attention should be paid to adjusting the axial clearance of the bearing during installation and operation.