weld plates-manufacture,factory,supplier from China

Product Description:NM400 and NM500 are wear-resistant steel plates, mainly used for occasions requiring high wear resistance.

Product Description:ASTM A36 carbon steel plates are used in the manufacture of mechanical parts such as bases, brackets, etc.

Product Description:5M52 5086 aluminum plates can be used to make sunshades, awnings and other facilities in buildings.

Product Description:High carbon steel plates have a higher carbon content, usually between 0.60%-1.50%. Widely used in the manufacture of various cutting tools, such as cutting tools, saw blades, etc.

Product Description:SS400 carbon steel can be used for some non-critical structural components of the car body, such as some reinforcement plates and brackets inside the body.

Product Description:Mild steel plates have a lower carbon content, usually no more than 0.25%. The lower carbon content makes the steel have good toughness, ductility and weldability. Used in the manufacture of home appliances, such as refrigerators, washing machines, air conditioners, etc.

Angular contact ball bearing has high limit rotational speed, they can carry radial load and axial load simultaneously, they can also withstand purely radial load. The axial load carrying capacity depends on the magnitude of contact angle and increases with increasing contact angle. Since the rigidity of single-row angular contact ball bearings can be increased by preloading, they are often used in the main spindles of machine tools, for which high running accuracy is required.Single row angular contact ball bearings can carry axial load acting in one direction only.

Railway shaft double row tapered roller bearings have the following characteristics:High load bearing capacity: Double row tapered roller bearings are designed with two rows of rollers, so they can withstand large radial and axial loads.High temperature resistance: suitable for high-speed operation and high temperature environment, with good heat resistance.Strong aligning ability: can maintain good working performance when bearing installation is not accurate or axial displacement.Easy assembly and disassembly: double row tapered roller bearing structure is relatively simple, easy disassembly

The design of the roller and raceway contact line of all thrust cylindrical roller bearings is optimized to avoid the generation of edge effects.

Trucks are very common tools in the transportation industry, carrying important goods and supplies. Truck bearing is one of its key components, it plays an important role in the vehicle transmission system support and operation. Its quality and running state directly affect the safety and stability of the vehicle.

The working principle of Koyo tapered roller bearings is to use the rolling body to roll between the inner and outer rings, thereby reducing the contact area and reducing friction resistance. When the external radial or axial load is applied, the roller will bear the load between the inner and outer rings to achieve the function of supporting and transferring the load of the bearing. Rollers are designed so that they can equally share load when rotating, reduce local stress and extend service life.

Inner and outer ring design: The internal and outer rings of the insulated bearing are made of insulating substances or different treatment, so that the modern-day interior the bearing can now not be carried out via the internal and outer rings, so as to reap the impact of electrical insulation.Seal design: The seal format of the insulated bearing is strict, which can efficaciously forestall the infiltration of exterior media and preserve the insulati

The DAC type auto front wheel bearing is a double row angular contact ball bearing incorporating an integral outer ring and two separable inner rings; which is available either with seals or without seals. Wheel bearings (hub bearing) main role is to load and for the rotation of the hub to provide accurate guidance, both axial load radial load again, is a very important component. Traditional automotive wheel bearing is composed of two tapered roller bearings or ball bearings combination, bearing installation, oiled, and adjust the clearance seals are conducted in automotive production line.

Product Description:The 2024-T3 Aluminum Pipe is a heat-treatable alloy known for its high strength, excellent workability, and moderate corrosion resistance.

Product Description:The surface has a typical checker pattern, which is produced by a special pressing die during the sheet forming process.

Product Description:The base plate of HDG Steel Coil (hot-dip galvanized steel coil) is usually cold-rolled steel sheet or steel strip. HDG steel coil thickness range is wide, generally from 0.3mm-3.0mm between.

Product Description:In the manufacturing of auto parts, many body structure parts and interior trim parts of different shapes can be processed with DX51D steel, which can be accurately formed in the stamping process, and maintain good surface quality, reduce subsequent dressing procedures, and improve production efficiency.Full cold galvanizing process:Chemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → drying → quality ins

The sealing structure of the flange bearing is indeed crucial, because it can effectively protect the inside of the bearing from the intrusion of external impurities, thereby reducing the wear and failure of the bearing. Choosing the appropriate sealing structure can improve the reliability and stability of the equipment and extend the service life of the bearing. If you have any questions about the sealing structure or bearing performance, please continue to communicate with me.

Product Description:Because the 1050 aluminum rod has good corrosion resistance, especially in some weakly acidic and weakly alkaline food processing environments, such as some non-critical parts of dairy processing equipment (such as pipe brackets, shells of mixing equipment, etc.), and conveying parts of beverage production equipment.

NTN tapered roller bearings are mainly used to bear radial and axial combined loads mainly based on radial loads, with high stiffness and rotation accuracy, and have large bearing capacity and low limit speed compared with angular contact ball bearings. Its carrying capacity depends on the Angle of the raceway of the outer ring, and the greater the Angle, the greater the carrying capacity.

Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction.The type code of tapered roller bearings is 30,000, and tapered roller bearings are separable bearings.

We are authorized distributors of FAG bearings. FAG is a leading manufacturer of almost all types of bearings. We can provide most of the bearing products in the FAG bearing catalogue.

Agricultural engineering involves a wide range of machinery, equipment and tools, including tillers, tractors, rake machines, balers and high-power harvesting machinery such as green feed harvesters and combine harvesters. A variety of different mechanical equipment, also need to face the harsh working environment. The dusty conditions in summer have very high requirements for bearing seals. In addition, farming machinery bearings are usually integrated with flanged housings to simplify assembly.

 Thrust needle and retainer assembly are comosed of a set of tray ring gaskets combined with retainer with roller bearings.The stand leads and holds many rolling elements.The thrust needle bearings or thrust-cylindrical roller bearings can support the bearings with the axial directional load and so the can be used as the bearings with good rigidity and minium axial occupied spaces.If the surface of the adjacent parts can be used as a tray for the rolling needles and the holding stand assembly should be recommended when the support space is big enough so that a small axial cross secti