UCW203 Stainless Steel Bearing With Seat Cheap Pillow Block Bearing-manufacture,factory,supplier from China

Product Description:2117 aluminum coil is used to manufacture some non-critical structural components of the aircraft, such as some sheet metallic components interior the aircraft, some connecting components that do now not endure excessive power loads, etc., and is additionally generally used in rivets for plane buildingsSpecifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075,

Product Description:Z-shaped aluminum profiles are used for architectural ornamental lines, such as the side therapy of wall corners, doorways and windows, which can adorn and protect; they can additionally be used as assisting factors for constructing curtain walls, roof structures, etc., to furnish structural energy and stability.In mechanical manufacturing, they can be used to make tools frames, guardrails, workbenches, etc., which can meet the equipment's necessities 

Forklift Mast Roller Bearing Precautions1, To keep the forklift bearing its surroundings clean Even if the the invisible smile dust into the forklift bearings will increase bearing wear, vibration and noise.2, Using the installation to be carefully Not allow powerful punch forklift bearing, does not allow a direct hit with a hammer, and not allowed to pass through the rolling pressure.3, The use of appropriate, accurate installation tools To make use of a special tool, and tried to avoid using something like cloth and short fiber.4,To prevent the corrosion of forklift bearings Handle forklift

Product Description:Cold-rolled carbon steel coil is further processed by hot-rolled carbon steel coil as raw material. It is widely used in household appliances, such as refrigerators, washing machines, air conditioners, etc.

Product Description:The Q215 I Beam has an "I" form in pass section, consisting of the top and decrease parallel flanges and the internet connecting the flanges, comparable in structure to the capital English letter "I".

Product Description:The density of aluminum is about one-third of that of steel, and the same volume of aluminum profiles is lighter in weight, easy to handle, install and use, and has obvious advantages in some areas with strict requirements for weight, such as aerospace and automobile manufacturing.Alloy Grade & ConditionThermal Expansion Coefficient (20 - 100℃) [μm/m·k]Melting Range [℃]Electrical Conductivity at 20℃ (%IACS)Resistivity at 20℃ [Ωmm²/m]Density at 20℃ [g/cm³]2024 - T35123.2500 - 635300.0582.825052 - H11223.8607 - 650350.0502.725083 - H11223.4570 - 640290.0592.726061 - T6512

Product Description:1145 aluminum plate has good electrical conductivity and electromagnetic shielding performance, can be used to make electronic equipment shell, such as computer chassis, mobile phone shell, etc., can protect the internal electronic components, but also effectively prevent electromagnetic interference, improve the stability and performance of the equipment.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm 

Product Description:1060 aluminum coil is used in the manufacture of car physique shape parts, radiators, air conditioning gadget components, indoors parts, etc., which helps to limit the weight of the physique and enhance the overall performance and gas financial system of the car.Specifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021TemperF, O, HM

Product Description:Our 3.5mm Galvanized Steel Coils are crafted with meticulous craftsmanship and cutting - edge technology. The ultra - thick, premium - grade zinc coating provides supreme corrosion resistance, making them the indisputable choice for the most harsh and unforgiving environments. These coils are specifically designed for massive infrastructure endeavors like large - scale port construction, huge - capacity industrial liquid storage tanks, and extra - heavy - duty mining and construction machinery.

Product Description:The surface has a typical checker pattern, which is produced by a special pressing die during the sheet forming process.

Product Description:In the field of medical devices, 5B05 aluminum T-bars can be used to manufacture parts such as the support structure of some medical devices and the handles of surgical instruments.

Product Description:5082 aluminum alloy plate has high specific strength and good corrosion resistance, can reduce the weight of the aircraft at the same time, to ensure the strength and reliability of the aircraft structure, so it is often used in the manufacture of aircraft skin.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollAluminum Grade1000 SeriesIndustrial Pure Aluminum(1050,105

Product Description:Because the 1050 aluminum rod has good corrosion resistance, especially in some weakly acidic and weakly alkaline food processing environments, such as some non-critical parts of dairy processing equipment (such as pipe brackets, shells of mixing equipment, etc.), and conveying parts of beverage production equipment.

Product Description:In building doors and Windows, 5050 aluminum alloy corner materials are often used to make the frame and corner connection structure of doors and Windows. Its good corrosion resistance can resist the erosion of the external environment, ensure that doors and Windows will not rust corrosion in long-term use, and extend the service life.

Product Description:As an experienced Q195(A/B) Steel Plate supplier, we offer this practical product. Made from quality raw materials, it has a yield strength of around 195MPa. Although it has a relatively lower strength compared to some high - end steel plates, it shows good formability and weldability.This makes it suitable for small - scale construction projects, simple structural components, or where cost - effectiveness is key. Our strict quality control during production ensures each plate meets industry standards. We also guarantee timely delivery.

Product Description:In the structural guide gadget of the constructing curtain wall, 5183 aluminum pipes can be used as guide pipes, beams and different components, with top energy and corrosion resistance, and can stand up to the weight of the curtain wall and wind loads, whilst displaying the splendor and trend of modern-day architecture.Product Specifications:Product NameAluminum Pipe TubeStandardAISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etcWall Thickness0.5-150 mm or Custom

Product Description:In the physique body and aid shape of mining gear such as crusher and ball mill, it resists the influence pressure of ore and the vibration of the gear itself to make certain the secure operation of mining machinery.country of originChinaWhether alloynon-alloyDelivery date8-14 daysbrandXINDONGYUmodelAngle SteelapplicationRoof beams, bridges, transmission towers, etc.Processing servicesBending, welding, punching, uncoiling, cuttingProduct nameAngle steelMaterialQ235B/Q355B/SS400/SS490/ST52/Q

Product Description:The Q345GJ(B/C/D/E) Steel Angle is extensively used in frames and guide buildings of heavy equipment and building machinery.

Product Description:The base plate of HDG Steel Coil (hot-dip galvanized steel coil) is usually cold-rolled steel sheet or steel strip. HDG steel coil thickness range is wide, generally from 0.3mm-3.0mm between.

Product Description:Because the 4104 aluminum rod has good thermal conductivity, it can be used to manufacture radiators for electronic equipment, such as computer graphics card radiators, server radiators, etc.

Product Description:Often used in the manufacture of high-strength machine parts, such as drive shaft, gear, crankshaft, etc., these parts need to withstand large loads and stresses in mechanical equipment, 2014 aluminum plate's high strength and good processing performance can meet its use requirements.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollAluminum Grade1000 SeriesIndust

Product Description:It is used in the helping and connecting components of railway bridge, platform cover and different structures.

Product Description:The roof region of the stadium is giant and the structure is complex, and the 820mm galvanized roof plate can adapt to the roof necessities of this giant building. It can face up to the weight of the stadium roof, wind hundreds and brief tools hundreds that may additionally show up at some point of sports activities activities (such as massive lighting fixtures equipment, sound equipment, etc.).

Product Description:0.1mm Galvanized Steel Coils are the epitome of strength and corrosion resistance, ideal for construction, automotive, and heavy machinery applications. These coils, characterized by their galvanized coating adhesion and uniform galvanized coating thickness, offer superior durability in harsh environments. With a focus on dimensional accuracy and surface finish, our coils are tailored for precision fabrication in various industrial settings.