Timken Angular Contact Bearing-manufacture,factory,supplier from China

A single row angular contact bearing is a common type of bearing, usually consisting of an inner ring, an outer ring, a retainer and a rolling element. It is designed so that the bearing can withstand radial, axial or combined loads when rolling.

Bearing capacity: NTN angular contact bearings have high bearing capacity and can withstand large radial and axial loads. In the process of use, the axial load of the bearing will cause the contact pressure between the inner and outer rings to increase, so it is necessary to choose the appropriate contact Angle to improve the bearing capacity.Rotation accuracy: NTN angular contact bearings have high rotation accuracy, which can ensure that the mechanical equipment has stable rotation performance during operation.

High load capacity: Thanks to the angular contact design, NTN angular contact ball bearings perform well in terms of load capacity and are suitable for high-speed operation and high-power transmission.High precision: NTN angular contact ball bearings are manufactured with high precision, which can ensure their stability, low noise and high performance during operation.High temperature resistance: NTN angular contact ball bearings are usually made of high temperature wear-resistant materials, which can maintain good operating performance in high temperature environments.High speed: NTN angular

NTN angular contact bearing is a commonly used bearing type with excellent load bearing performance and stable rotation accuracy. This kind of bearing is usually composed of inner and outer rails and steel balls and other components, and is suitable for various mechanical equipment and transmission systems. The structural design of NTN angular contact bearings is called the contact Angle, which has the ability of the inner and outer rings to withstand radial and axial loads.

Advantage of 7020C BearingWhen using the bearing, pay attention to make the raceway on one side without ball loading notch bear the main load.The locking port of this kind of bearing is on the outer ring.Generally, the inner and outer rings cannot be separated, and can bear the combined radial and axial load and the axial load in one direction.The ability to bear axial load is determined by the contact angle.The larger the contact angle, the higher the ability to bear axial load.Angular contact ball bearings are mainly divided into single row angular contact ball bearings and double row angula

BE=Single Row Angular Contact Ball Bearing With A 40° Contact Angle And Optimized Internal Design. CB=Bearing For Universal Matching. Two Bearings Arranged Back-To-Back Or Face-To-Face Will Have A Normal Axial Internal Clearance Before Mounting. M=Machined Window-Type Brass Cage, Ball Centered, Different Designs Are Identified By A Figure, e.g.

Single row angular contact ball bearings mainly used forundertaking combined load both from radius and axle andalso for pure axle load,rotator speed is high.Material of bearings is choosed on refining bearing steelGCr15 (100Cr6，SUJ2,S2100) and other type of bearingsteel,balls are adopting GCr15 (100Cr6，SUJ2,S2100) orceramic. The bearings are classified as 7000C (15°)70000AC(25°)、7000B (40) in accordance with theircontact angle,other bearings with different contact angular areavailable on request.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)G

Retentors, usually made of steel or synthetic materials, are used to hold rolling elements in position, ensuring that they maintain the correct clearance and position relationship with each other during use.Single-row angular contact bearings are suitable for all kinds of rotating machinery, such as automobile wheels, motors, fans, etc., which can withstand high-speed operation and large loads.When installing, it is necessary to pay attention to the cleaning and lubrication of the bearing to ensure its performance and life.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter

Angular contact ball bearings are of a non-separation design, and the shoulders on both sides of the inner and outer rings are not high or low. In order to increase the load capacity of the bearing, the shoulder on one side is machined lower, so that the bearing can fit more steel balls.Single row angular contact ball bearings can only withstand one direction of the axial load, in the radial load, will cause additional axial force, must apply the corresponding reverse load, therefore, this kind of bearings are generally used in pairs.

Angular contact thrust ball bearings consist of an inner, outer ring, cage, steel ball and groove, and an inner/outer ring with a spherical surface, which can withstand unidirectional and bidirectional axial loads and slight radial loads.

NTN angular contact ball bearings are suitable for a wide range of industrial equipment and machinery, including but not limited to the following applications:Machine tools and CNC equipment: used to support spindles and other rotating parts to ensure high precision and high-speed stable operation of the equipment.Automobile and motorcycle: widely used in engine, transmission system, suspension system and other components to ensure the smooth running of cars and motorcycles.Construction machinery: such as excavators, cranes, bulldozers, etc., used to withstand the huge load and bumpy vibration

There are several types of 7000C (∝=15°), 7000AC (∝=25°) and 7000B(∝=40°). The lock of the bearing is on the outer ring, generally the inner and outer rings can not be separated, and can withstand the combined radial and axial load as well as the axial load in one direction. The ability to bear axial load is determined by the contact Angle, and the contact Angle is large, the ability to bear axial load is high.

Mainly bear a large unidirectional axial load, the greater the contact Angle, the greater the load bearing capacity. The cage material is steel plate, brass or engineering plastic, and the forming method is stamping or turning, depending on the bearing form or use conditions.

Ceramic materials have excellent wear resistance, corrosion resistance, high temperature resistance, low temperature resistance, high hardness, high strength, low expansion coefficient, electrical insulation, no magnetic conductivity and other excellent characteristics.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)706C–6176————0.006707C360177196————0.006708C360188227————0.014709C360199247————0.016723C360233104––––0.002724C360244135————0.014725C360255165————0.0047726C360266

Hub bearing unit ball bearing is developed on the basis of standard angular contact ball bearings and tapered roller bearings, it will be two sets of bearings as one, with good assembly performance, can be omitted clearance adjustment, light weight, compact structure, large load capacity, for sealing bearings can be loaded in advance grease, omit the external hub seal and free from maintenance and other advantages, has been widely used in cars, There is also a trend of gradual expansion of applications in heavy-duty vehicles.Country of Origin (Primary)USFull Timken Part NumberHA590228;A/AM-HUB

Thrust ball bearings are produced as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.Thrust ball bearings are separable, the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft washers have a ground bore to enable an interference fit.

Product Description:5M52 5086 aluminum plates can be used to make sunshades, awnings and other facilities in buildings.

Product Description:In interior decoration, it can be used to make decorative strips, partitions, screens and so on. Its diverse cross-section shapes and processing methods can create a rich decorative effect.

Railway bearings play a key role in the railway transportation system, mainly in the following aspects:1. Bear and transfer loadsRailway bearings can withstand the axle load of the train, and ensure the stability of the track during the operation of the train by distributing the load pressure. They are able to accept loads of hundreds of tons on EMUs or locomotives and transfer them to the tracks, reducing wear on the tracks and other vehicles.2.

We are IKO bearing distributors，we offer a full range of IKO Bearings at very competitive prices, including high quality IKO needle bearing, crossed roller bearings, thrust bearings, roller bearings, ball linear motion rolling guides, roller rolling guides, linear motion rolling guides , precision positioning tables and mechanical parts. Most products can be shipped same or next day.IKO Crossed Roller BearingsIKO Bearing designs and manufactures a wide range of crossed roller bearings that can simultaneously withstand radial, thrust and moment loads.

UBC bearing adhering to the "customer first, quality first" business philosophy, is committed to providing customers with the best quality products and services. The company adopts advanced production equipment and strict quality control measures in the manufacturing process to ensure stable and reliable product quality.

Some typical insulating bearing materials include ceramic, graphite and the famous polytetrafluoroethylene (PTFE). Ceramics are widely used in the bearing industry because of their hard diamond, wear-resistant gold and outstanding insulation properties. Graphite is widely used in bearings because of its extremely low friction and high lubrication. PTFE is widely used because of its excellent corrosion resistance and strong insulation. According to actual needs, designers and engineers can also choose other special materials to build insulated bearings.

Product Description:S350GD Galvanized Steel Coils are premium-grade steel products, characterized by their enhanced formability and structural integrity. These coils are specifically designed for applications requiring high tensile strength and resistance to environmental corrosion.

Linear bearing is a linear motion system used for linear stroke and cylindrical shaft.