Thrust Load Bearing-manufacture,factory,supplier from China

The working principle of thrust roller bearing is to transmit and bear axial load through the linear movement of thrust roller. When the axial load acts on the bearing, the thrust roller will roll along the slide of the inner and outer rings to realize the load transfer.

Thrust roller bearings are used to bear axial and radial combined loads based on axial loads, but the radial load shall not exceed 55% of the axial load.

Advantage of 51118 BearingApplication scope of thrust ball bearing:It is only applicable to the parts bearing one side of axial load and low speed, such as crane hook, vertical water pump, vertical centrifuge, Jack, low-speed reducer, etc.The shaft ring, seat ring and rolling element of the bearing are separated and can be installed and disassembled separately.TypeIn addition, the bearing can bear axial load, but can not bear radial load.Composition of thrust ball bearing: the thrust ball bearing is composed of seat ring, shaft ring and steel ball cage assembly.

Thrust roller bearing is an important mechanical part, which is used to support the axial load acting on the rotating parts. Its use is directly related to the stable operation and life of mechanical equipment, so it should be paid attention to. Advantages of thrust roller bearings The processing technology of thrust roller bearings is very precise, and the production accuracy of its inner ring, outer ring and raceway can reach sub-micron level.

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

The structure of the thrust roller bearing is generally composed of an inner and outer ring, a thrust roller, a cage and a sealing ring. The inner and outer rings are annular structures, which are installed on the shaft and the housing to carry the axial load. The thrust roller is cylindrical or conical, arranged between the inner and outer rings, and can effectively withstand and transfer the axial load. The cage is a structure that supports and holds the thrust roller, usually made of steel or copper.

Thrust roller bearings have the following application characteristics:Withstand large axial load: thrust roller bearings are suitable for mechanical equipment that needs to withstand large axial load, and have high carrying capacity and stability.High-speed rotation: thrust roller bearings can provide good support and smooth operation when rotating at high speed, suitable for fast equipment.Long service life: Because thrust roller bearings can effectively reduce friction and wear, they have a long service life and reliability.Easy installation and maintenance: thrust roller bearings have simpl

The structure of one-way thrust ball bearing is relatively simple, mainly composed of outer ring, inner ring, steel ball, cage and cover.The outer ring is the outermost part of the thrust ball bearing, usually made of steel material. The inner ring is located inside the outer ring, and the gap between the outer ring is the movement space of the steel ball. The steel ball is the key component connecting the outer ring and the inner ring, which can provide the function of carrying the thrust load.

Roller bearings are designed for extremely demanding applications and must support high loads, severe misalignment, environmental pollution, shock and vibration. Due to the highest load rating in the industry and production from factories near you, there is no reason to look for self-aligning roller bearings anywhere else.TypeCylindrical roller thrust bearingTapered roller thrust bearingSelf aligning roller thrust bearingSelf aligning roller thrust bearing is a kind of self-aligning bearing. In use, the maximum allowable shaft deviation is about 2 degrees.

1.Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations, which can withstand heavy loads and vibration loads without difficulty.2. this kind of bearing can bear a large axial load in a single direction, but can not bear radial load, they do not have automatic aligning ability.3. the thrust cylindrical roller bearing can be divided into thrust cylindrical roller and cage assembly, shaft ring and seat ring.4.

As one of the leading thrust ball bearing manufacturers in China, we can provide standard thrust ball bearings, stainless steel thrust ball bearings, ceramic thrust ball bearings, one-way thrust ball bearings, thrust angular contact ball bearing, axial ball thrust bearings, miniature thrust ball bearings Bearings, banded roller thrust bearings, deep groove ball thrust bearing, bearing dimensions support metric and inches. Various sizes can also be customized according to customer needs.

Thrust cylindrical roller bearings and thrust roller bearings are suitable for low speed occasions, the thrust tapered roller bearing speed is slightly higher than the thrust cylindrical roller bearing. Bearing knowledgeThrust cylindrical roller bearings are separated bearings and can only withstandThe unidirectional axial load and slight impact can limit the axial displacement of the shaft (or housing) in one direction, so it can be used for unidirectional axial positioning. However, its carrying capacity is much greater than that of thrust ball bearings.

Single course thrust ball bearings: consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they need to be supported so that all balls can be evenly loaded. Bearings lift the axial load solely in one direction. They are no longer capable to lift radial forces.Double path thrust ball bearings: have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces.

Thrust ball bearings are the driving force behind smooth, high-performance machinery. Engineered for optimal axial load handling,these bearings excel in applications requiring precision, reliability, and durability. Whether in automotive systems, heavymachinery, or aerospace technology, their seamless operation ensures efficiency and sustained performance.With their advanced design and materials, thrust ball bearings minimize friction, enabling machinery to operate seamlessly under intense pressure and varying speeds.

Single direction thrust ball bearings:consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they must be supported so that all balls can be evenly loaded. Bearings carry the axial load only in one direction. They are not able to carry radial forces. Double direction thrust ball bearings:have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces. The shaft washer has raceways on both sides and is fixed on the journal.

The unidirectional thrust ball bearing comprises a shaft ring, a seat ring and a ball-cage assembly. It can be separated and the shaft ring, seat ring, ball-cage assembly can be installed separately. Unidirectional thrust ball bearings can withstand the axial load in a single direction and can be positioned in a single direction, but must not bear any radial load.The 51130 belongs to the single direction thrust ball bearings, also called ball thrust bearings or axial deep groove ball bearings. These bearings consist of a shaft ring, a housing ring and a ball and cage assembly.

Thrust roller bearing is a type of bearing specially designed to bear axial loads, which consists of thrust rollers to provide good support and stability during high-speed rotation. Thrust roller bearings are usually used in parts of mechanical equipment that need to withstand high axial loads, such as gear boxes, turbines, centrifuges, etc.

Thrust tapered roller bearings can form a very compact bearing configuration, which can withstand very heavy axial loads, is not sensitive to impact loads, and has good rigidity. LYTBZ produces unidirectional tapered roller bearings and bidirectional tapered roller thrust bearings. The screw fixed bearing constitutes a specially designed unidirectional tapered roller thrust bearing and is filled with rollers.Thrust tapered roller bearing features:This bearing is used for rolling mill screw fixed bearing configuration.

The bidirectional thrust ball bearing is composed of an inner and outer sphere, a steel ball and a cage. The inner and outer spheres are spherical, the steel balls are distributed between the two spheres, and the cage is used to maintain the spacing and distribution of the steel balls. When stressed, the inner ring and the outer ring bear axial and radial forces respectively, and the steel ball transfers force by rolling.

Features :Thrust ball bearings consist of two precision washers (rings) and a ball complement spaced by retainer. They can besupplied with or without radius ball grooves in the rings.

· The thrust ball bearing consist of a shaft washer, a housing washer and a ball  and cage thrust assembly.· The bearings are separable so that mounting is simple as the washers and the ball and cage  assembly can be mounted separately.· The types: bearings with a flat seat surface on the housing washer, bearings with a&nbs

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342

Thrust ball bearings are produced as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.Thrust ball bearings are separable, the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft washers have a ground bore to enable an interference fit.

1.Needle roller bearings for stamping outer rings. There are two kinds of bearings: perforated type and sealed type. The needle roller bearing has no inner ring, and the needle roller directly contacts the surface of the shaft, so the processing accuracy and heat treatment hardness of the shaft should be the same as that of the bearing inner ring.2. Solid ring needle roller bearings solid ring needle roller bearings, commonly used solid ring needle roller bearings are NA type and RNA type.3. Roller needle bearing4. Needle roller and cage assembly.