Tapered Roller Thrust Bearing-manufacture,factory,supplier from China

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342

Thrust tapered roller bearings can form a very compact bearing configuration, which can withstand very heavy axial loads, is not sensitive to impact loads, and has good rigidity. LYTBZ produces unidirectional tapered roller bearings and bidirectional tapered roller thrust bearings. The screw fixed bearing constitutes a specially designed unidirectional tapered roller thrust bearing and is filled with rollers.Thrust tapered roller bearing features:This bearing is used for rolling mill screw fixed bearing configuration.

Tapered curler bearing refers to the radial thrust kind rolling bearing whose rolling physique is a tapered roller. There are small cone angles and giant cone angles. The small cone Angle usually bears the radial and axial mixed hundreds ordinarily primarily based on radial loads, regularly used in double, reverse installation, the internal and outer seat rings can be established respectively, and the radial and axial clearance can be adjusted throughout set up and use.

As one of the largest taper roller manufacturers in Shandong, China, in addition to the tapered roller bearings introduced above, we can also provide the following tapered roller types.

The working principle of Koyo tapered roller bearings is to use the rolling body to roll between the inner and outer rings, thereby reducing the contact area and reducing friction resistance. When the external radial or axial load is applied, the roller will bear the load between the inner and outer rings to achieve the function of supporting and transferring the load of the bearing. Rollers are designed so that they can equally share load when rotating, reduce local stress and extend service life.

A double-row tapered roller bearing is a common bearing type that consists of two tapered rollers mounted on an inner ring and an outer ring. It can withstand large radial and axial loads and is able to maintain high accuracy and stiffness while rotating at high speeds.Double row tapered roller bearings are designed so that the inner and outer rings can be adjusted separately to achieve axial and radial preloading.

Advantage of 30307 Bearing• 302XX, 303XX, 313XX, 320XX, 322XX, 323XX and 329XX series• Double row tapered roller bearing series (details available on request)• Pressed steel and polyamide cages• Standard accuracy P0 and higher accuracy P6.• A variety of inch bearings are also availableTypeA singleSingle row tapered roller bearings can withstand combined radial and axial loads.

Thrust roller bearing is an important mechanical part, which is used to support the axial load acting on the rotating parts. Its use is directly related to the stable operation and life of mechanical equipment, so it should be paid attention to. Advantages of thrust roller bearings The processing technology of thrust roller bearings is very precise, and the production accuracy of its inner ring, outer ring and raceway can reach sub-micron level.

Iko tapered roller bearings have high load bearing capacity and wear resistance. Because of the conical roller design, the bearing can share the load evenly when bearing heavy loads, and the bearing capacity is effectively improved. At the same time, the use of high-quality materials and advanced manufacturing technology to ensure the bearing's wear resistance and extend the service life.Iko tapered roller bearings have high rotation accuracy and running stability.

Koyo tapered roller bearings are suitable for applications requiring simultaneous radial and axial loads, such as differential, hub, transmission and other components of automobiles, as well as wind turbines, agricultural machinery, construction machinery and other equipment requiring high load capacity and high rotation accuracy. The selection of suitable Koyo tapered roller bearings can improve the efficiency and reliability of machine equipment, reduce maintenance work and costs, and is an important bearing product widely used in various fields.

Thrust cylindrical roller bearings and thrust roller bearings are suitable for low speed occasions, the thrust tapered roller bearing speed is slightly higher than the thrust cylindrical roller bearing. Bearing knowledgeThrust cylindrical roller bearings are separated bearings and can only withstandThe unidirectional axial load and slight impact can limit the axial displacement of the shaft (or housing) in one direction, so it can be used for unidirectional axial positioning. However, its carrying capacity is much greater than that of thrust ball bearings.

Thrust roller bearing is a type of bearing specially designed to bear axial loads, which consists of thrust rollers to provide good support and stability during high-speed rotation. Thrust roller bearings are usually used in parts of mechanical equipment that need to withstand high axial loads, such as gear boxes, turbines, centrifuges, etc.

The working principle of thrust roller bearing is to transmit and bear axial load through the linear movement of thrust roller. When the axial load acts on the bearing, the thrust roller will roll along the slide of the inner and outer rings to realize the load transfer.

The structure of the thrust roller bearing is generally composed of an inner and outer ring, a thrust roller, a cage and a sealing ring. The inner and outer rings are annular structures, which are installed on the shaft and the housing to carry the axial load. The thrust roller is cylindrical or conical, arranged between the inner and outer rings, and can effectively withstand and transfer the axial load. The cage is a structure that supports and holds the thrust roller, usually made of steel or copper.

UBC tapered roller bearing is a kind of rolling bearing with tapered roller, the roller and raceway between the inner ring (cone hub) and the outer ring (cup) intersect at the cone half Angle on the outer surface of the cone, so that the bearing can bear a large load in the radial and axial direction. UBC tapered roller bearings usually include single row, double row and four row structures, which are widely used in automotive, mechanical equipment, aerospace and other fields.

Thrust roller bearings are used to bear axial and radial combined loads based on axial loads, but the radial load shall not exceed 55% of the axial load.

Four row tapered roller bearings are mainly used for work rolls, support rolls, and billet breakers of various plate and strip rolling mills. The clearance of the bearing is changed by adjusting the thickness of the spacer to make it more suitable for the working condition.1. Strong bearing capacity: four row tapered roller bearings can withstand greater loads under the same size, because it is shared by multiple rollers, so it has higher carrying capacity and better distribution performance.2.

Roller bearings are designed for extremely demanding applications and must support high loads, severe misalignment, environmental pollution, shock and vibration. Due to the highest load rating in the industry and production from factories near you, there is no reason to look for self-aligning roller bearings anywhere else.TypeCylindrical roller thrust bearingTapered roller thrust bearingSelf aligning roller thrust bearingSelf aligning roller thrust bearing is a kind of self-aligning bearing. In use, the maximum allowable shaft deviation is about 2 degrees.

The structure of Koyo tapered roller bearings mainly includes an outer ring, an inner ring, a rolling body (roller) and a cage. The rolling element is located between the inner ring and the outer ring and is kept in the specified axial position by the cage. The contact Angle between the inner ring and the outer ring is generally between 10° and 30°, and different contact angles will affect the bearing capacity and speed limit.

Inch taper/tapered roller bearings belong to separable bearing, as the outer ring, also called cup, is separable and easy for assembly.

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

Product Description:In interior decoration, it can be used to make decorative strips, partitions, screens and so on. Its diverse cross-section shapes and processing methods can create a rich decorative effect.

Product Description:Q195 carbon steel coil due to its good plasticity, can be used to manufacture light steel keel, can be easily processed into various shapes of keel, and can withstand a certain building load.