Swingarm Bearing-manufacture,factory,supplier from China

High temperature resistant bearing: The material itself has resistance to high temperature 1200 ℃, and good self-lubrication, tem- perature between 100℃ to 800℃ should not produce temperature difference caused by the expansion.

Engineering Machinery Bearing have a large carrying capacity and are suitable for supporting structures with limited installation dimensions.The surface of the journal is hardened as the rolling surface, and the bearing is fitted into the seat hole with a press fit, and there is no need for it to be axially positioned.The bearing should be injected with an appropriate amount of grease before installation.Usually, no relubrication is required after assembly (BK type bearings are used in the support of the journal without the protruding end, the end face is closed for sealing, and can withstand

Construction machinery bearing is a mechanical component used to support and turn rotating parts. In construction machinery, bearings usually carry high-speed rotating parts, such as engines, transmission systems, etc. Bearings usually consist of an inner ring, an outer ring, a rolling element and a retainer.There are many types of construction machinery bearings, including rolling bearings and plain bearings. Rolling bearings reduce friction and improve rotation efficiency by rolling rolling elements (such as spheres, rollers or cylinders) between the inner and outer rings.

Inner and outer ring design: The inner and outer rings of the insulated bearing are made of insulating materials or special treatment, so that the current inside the bearing can not be conducted through the inner and outer rings, so as to achieve the effect of electrical insulation.Seal design: The seal design of the insulated bearing is strict, which can effectively prevent the infiltration of external media and maintain the insulation performance and stability of the bearing.

Rotary bearing is an important mechanical component used to support and rotate shafts, which is usually used in industrial equipment, ships, automobiles and construction machinery. It is mainly composed of an inner and outer ring, a rolling body and a cage, and realizes the rotation and support of the shaft by rolling between the inner and outer rings of the rolling body. The design and selection of rotary bearing have an important influence on the stability, reliability and operation efficiency of the equipment.

The structural design of the stud CAM follower needle bearing consists of an end plate integrated into the inner ring (stud) and another inner shoulder ring pressed against the stud. In this design, both ends of the stud have lubrication holes to ensure that the bearing can be fully lubricated during operation. The inner ring is hardened by induction, which can improve the hardness and wear resistance of the inner ring, thus extending the service life of the bearing.

Product Description:PPGI Steel Coil is a pre-painted galvanized steel product known for its corrosion resistance and vibrant color options. It offers a cost-effective solution for applications requiring both strength and aesthetic appeal. With a wide range of coating types available, it is ideal for construction, architectural facades, and appliance manufacturing.

Rolling bearing with seat is a common and widely used in various mechanical equipment bearings, which support and transmit rotating motion through rolling elements, with high load capacity and stability. Below I will describe in detail the structure, working principle and application areas of rolling bearings with seats, hoping to help you better understand this knowledge.A rolling bearing with seat is usually composed of several basic parts, such as an inner ring, an outer ring, a rolling element (such as a steel ball, roller, etc.) and a cage.

Product Description:1060 aluminum rods are used in automobile body structural parts, engine parts, radiators, air conditioning system components, body decoration strips and so on.

Thrust ball bearings are produced as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.Thrust ball bearings are separable, the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft washers have a ground bore to enable an interference fit.

Railway shaft double row tapered roller bearings have the following characteristics:High load bearing capacity: Double row tapered roller bearings are designed with two rows of rollers, so they can withstand large radial and axial loads.High temperature resistance: suitable for high-speed operation and high temperature environment, with good heat resistance.Strong aligning ability: can maintain good working performance when bearing installation is not accurate or axial displacement.Easy assembly and disassembly: double row tapered roller bearing structure is relatively simple, easy disassembly

Product Description:Q355B is widely used in high-rise buildings, long-span building structural frames, such as steel beams, steel columns, etc., because its high strength can effectively reduce the cross-section size of structural members. While meeting the requirements of structural strength and stability, it can reduce the building's self-weight and improve the utilization rate of building space.

Koyo tapered roller bearing is a common rolling bearing, usually used in automobiles, mechanical equipment, wind turbines and other fields.

(1)Linear motion bearing is a kind of low-cost metal for producing linear motion system, which is used for infinite stroke cylindrical shaft.. Because point contact ball bearing with shaft, so using the load is small.  (2) the flange linear bearing can be divided into: round flange type, method type, elliptical flange type, guided round flange, guiding method, guide the elliptical flange type, extended round flange type.(3)According to the specification is divided into two series of LM and LME series.

Railway Axle BearingsAxle bearings: tapered roller bearings, tapered roller bearing boxes, cylindrical roller bearings, spherical roller bearings. Railway axle bearings can be subjected to high shocks and loads. Mounting space is also limited, so in many cases compact, double-row bearings with high load ratings are used.Railway Axle Box BearingAxlebox bearings should have a large load carrying capacity, be able to resist shock vibration, and must have a high life expectancy, safety and reliability, smaller size and quality.

In rolling bearings, the bearing ring is separated by a rolling unit (rolling element), and in slide guidance systems, the movable part slides on a static guide rail or shaft. Depending on the type of track system, the sliding layer is on movable or rigid components. The lubricating oil is embedded in the sliding layer to achieve lubrication. INA linear plain bearing is a linear positioning bearing with infinite stroke length.

Product Description:The 5083 Aluminum Pipe is a high magnesium alloy known for its exceptional performance in extreme environments, particularly in marine applications due to its superior resistance to seawater corrosion and industrial chemicals.

Product Description:Because of its strength and good plasticity, hot rolled low carbon steel coil can withstand various loads in building structures, and is widely used in the construction industry to make various building structural parts, such as steel beams, steel columns, roof trusses and so on.

INA bearings schaeffler group is a leading manufacturer of almost all bearing types.We are INA bearing manufacturer and can provide a full range of INA bearings. For example: INA ball bearings,INA cam follower，INA thrust bearing，iINA spherical plain bearings，INA flange bearing，INA banded thrust bearing.The following is a detailed introduction about some INA bearings, if you want to know more, please contact us, we have 24 hours online service.INA Thin Section BearingsINA Thin-walled bearings are high-precision products with low operating noise and high load carrying capacity.

Product Description:5A06 aluminum rod has good thermal conductivity and can be used to manufacture heat sinks for electronic devices, such as computer CPU heat sinks and heat sinks for high-power electronic devices.

According to the different requirements of bearings and bearing seats, the classification of bearing seats is not exactly the same, and it is necessary to carefully check the selection according to the design when using.1 Classification according to the shape of the bearing seat:1.1 Outer spherical bearing with seat, also known as bearing unit (SKF). When there is no bearing, it is called the outer spherical bearing seat. 1.1.1.1 The outer spherical bearing seat is divided into 200 series according to the bearing series. The 500 series. The 300 Series. The 600 Series.

Some typical insulating bearing materials include ceramic, graphite and the famous polytetrafluoroethylene (PTFE). Ceramics are widely used in the bearing industry because of their hard diamond, wear-resistant gold and outstanding insulation properties. Graphite is widely used in bearings because of its extremely low friction and high lubrication. PTFE is widely used because of its excellent corrosion resistance and strong insulation. According to actual needs, designers and engineers can also choose other special materials to build insulated bearings.

Excavator bearing installation and removal methods, should be according to the excavator bearing structure, size and excavator bearing parts with the nature.Installation, disassembly pressure should be directly added to the end face of tight fit excavator bearing stalls circle, not by the excavator bearing rolling elements to transmit pressure, because this will be caused by the excavator bearing work surface indentation, impact excavator bearing normal workeven make excavator bearing damage.

Product Description:The aluminum sheet is 1/8 inch thick (about 3.175 mm). This thickness gives it a certain degree of robustness, suitable for a variety of applications requiring a certain degree of structural strength. Decorative panels that can be used for building facades can reduce the load of building structures due to their light weight and easy installation.