Split Self-Aligning Roller Bearing-manufacture,factory,supplier from China

NACHl's self-aligning roller bearings are a common and important industrial part, widely used in a variety of mechanical equipment and construction machinery. It is mainly composed of an outer ring, an inner ring, a roller, a cage and other components, and supports the rotating and swinging shaft through rolling friction. Aligning roller bearing has large radial load capacity and high axial load capacity, as well as excellent self-aligning performance, and can adapt to the relative tilt and axial change between shaft and seat when working.

Aligning roller bearings have two rows of rollers, mainly bearing radial loads, but also can withstand axial loads in either direction. It has high radial load capacity, especially suitable for heavy loads or dynamic loads, but cannot withstand pure axial loads. This kind of bearing outer ring raceway is spherical shape, so its aligning performance is good, can compensate for the coaxial error.Self-aligning roller bearings are divided into two different structures according to the roller cross section shape: symmetrical spherical roller bearings and asymmetric spherical roller bearings.

1.Cylindrical hole· With two rows of steel balls and a curved raceway in the outer ring, self-aligning ball bearings can be actively aligning· and can accept the point of view error between the shaft and the bearing seat. It is suitable for the working condition that simply shows the shaft deflection and the shaft error caused by different centers· Friction is the lowest of all rolling bearings· has only a small temperature rise even at high rotational speeds.2.

The sliding bearing seat is composed of an upper cover, a base, a split bearing bushing (aluminum bronze) and mounting bolts, which mainly bear radial load. Easy to use, no need to install bearings. The load-free part of the inner surface of the bearing bush is provided with an oil groove, and the lubricating oil flows into the gap through the oil inlet hole and the post groove.

Roller bearings are designed for extremely demanding applications and must support high loads, severe misalignment, environmental pollution, shock and vibration. Due to the highest load rating in the industry and production from factories near you, there is no reason to look for self-aligning roller bearings anywhere else.TypeCylindrical roller thrust bearingTapered roller thrust bearingSelf aligning roller thrust bearingSelf aligning roller thrust bearing is a kind of self-aligning bearing. In use, the maximum allowable shaft deviation is about 2 degrees.

In order to ensure the normal operation of NACHl's self-aligning roller bearings and extend their service life, proper installation and maintenance are required:When installing, pay attention to the alignment of bearings and axial centripetal to avoid bearing damage caused by tilt and excessive load.Regularly check the lubrication status of bearings, maintain proper lubrication grease, ensure normal lubrication of bearings, reduce friction and wear.Regularly clean the outer surface of the bearing and the surrounding environment to avoid dust and impurities entering the bearing interior, af

We are an authorized dealer of NACHI bearings. We can provide most of the bearing products in NACHI bearing catalogue. We offer a full line of NACHI products including Ball Bearings, Self-Aligning Bearings, Angular Contact Bearings, Cylindrical Bearings, Needle Roller Bearings and Spherical Bearings at very competitive prices for same day or next day delivery.NACHI Cylindrical Roller BearingsThe structure of cylindrical roller bearings is the simplest of all radial roller bearings, whose inner ring, outer ring and rollers are in line contact, with a large radial load capacity.

High quality: UBC bearings are made of excessive first-rate substances and have passed through strict satisfactory manage and checking out to make certain reliable product quality.High precision: UBC bearings use superior manufacturing science and precision machining technology, with particular measurement and excessive accuracy, to make certain steady performance.Strong durability: UBC bearings have exceptional put on resistance and corrosion resista

Thrust roller bearings are used to bear axial and radial combined loads based on axial loads, but the radial load shall not exceed 55% of the axial load.

The inner and outer rings are made of high-quality bearing steel material, with good hardness and wear resistance, and can withstand high-speed rotation and heavy load conditions.The roller adopts cylindrical or conical design, which can effectively share the radial and axial load, reduce rolling friction, and improve the rotation efficiency of the bearing.The cage is made of steel or copper material, with good strength and toughness, which can support the roller stably and extend the service life of the bearing during high-speed operation.The aligning design can automatically adjust the relat

Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations that can withstand heavy loads and vibration loads without difficulty. Such bearings can withstand large axial loads in a single direction, but they cannot withstand radial loads, and they have no automatic aligning capability.

Railway shaft double row tapered roller bearings have the following characteristics:High load bearing capacity: Double row tapered roller bearings are designed with two rows of rollers, so they can withstand large radial and axial loads.High temperature resistance: suitable for high-speed operation and high temperature environment, with good heat resistance.Strong aligning ability: can maintain good working performance when bearing installation is not accurate or axial displacement.Easy assembly and disassembly: double row tapered roller bearing structure is relatively simple, easy disassembly

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

Product Description:DX52D+Z Galvanized Steel Plate is a premium-grade steel product that combines the strength of cold-rolled steel with the protective properties of zinc coating. This high-performance material is engineered for applications demanding both structural integrity and resistance to corrosion.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis, which means that they are designed to accommodate combined loads, i.e. simultaneously supporting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.

Double row angular contact ball bearings can bear large radial loads, mainly radial and axial combined loads and torque loads, limiting the axial displacement of both sides of the shaft.

In railway applications, bearings need to comply with several customer requirements. These include the need for reliability, extended maintenance intervals, space-saving design capabilities and more.We offer solutions for a wide range of wheelset designs for all kinds of railway rolling stock.

We are an authorized ntn bearings distributor. NTN is a leading manufacturer of virtually all bearing types. We canprovide most of the bearing products in NTN bearing catalogue.

Product Description:It is used in key components such as body structure and bogie of high-speed train. The high strength and good fatigue resistance of 7A04 and 7050 aluminum alloy can ensure the stability and safety of the train body when high-speed trains are confronted with huge air resistance, vibration and complex mechanical loads generated by high-speed running.

In general, INA needle roller bearings have the advantages of high load carrying capacity, high-speed operation, low friction, lightweight and compact, and are widely used in industrial automation, machine tool equipment, automotive transmission systems and other fields.

1.Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations, which can withstand heavy loads and vibration loads without difficulty.2. this kind of bearing can bear a large axial load in a single direction, but can not bear radial load, they do not have automatic aligning ability.3. the thrust cylindrical roller bearing can be divided into thrust cylindrical roller and cage assembly, shaft ring and seat ring.4.

Trucks are very common tools in the transportation industry, carrying important goods and supplies. Truck bearing is one of its key components, it plays an important role in the vehicle transmission system support and operation. Its quality and running state directly affect the safety and stability of the vehicle.

Product Description:Polyester coated steel coil is a kind of steel coil which is pre-coated with polyester coating on the surface of galvanized steel plate by rolling coating, etc.

In rolling bearings, the bearing ring is separated by a rolling unit (rolling element), and in slide guidance systems, the movable part slides on a static guide rail or shaft. Depending on the type of track system, the sliding layer is on movable or rigid components. The lubricating oil is embedded in the sliding layer to achieve lubrication. INA linear plain bearing is a linear positioning bearing with infinite stroke length.