Split Housing Bearing-manufacture,factory,supplier from China

The sliding bearing seat is composed of an upper cover, a base, a split bearing bushing (aluminum bronze) and mounting bolts, which mainly bear radial load. Easy to use, no need to install bearings. The load-free part of the inner surface of the bearing bush is provided with an oil groove, and the lubricating oil flows into the gap through the oil inlet hole and the post groove.

Agricultural bearing is a bearing specially used in agricultural machinery and equipment, with the following characteristics:Wear resistance: Agricultural machinery usually works in harsh environments and needs to have high wear resistance and be able to operate stably for a long time.Corrosion resistance: Agricultural machinery is often used in humid, dusty, fertilizer and other environments, bearings need to have a certain corrosion resistance, can maintain good working condition for a long time.Load capacity: Agricultural machinery usually needs to withstand a large load, bearings need to h

Use of bearing housing cooling system. Bearing seat cooling water in the correct use of the case not only extend the service life of the bearing seat, but also improve production efficiency. The material of the bearing housing is generally made of special bearing housing steel through various treatments, and the best bearing housing steel also has the limit of their use, such as temperature.

Pillow block unitsSeated (vertical) ball bearing units consist of a seated bearing mounted in a housing that can be bolted to a support surface. In our product range, you can find units to meet almost all requirements, including units that comply with ISO standards, North American standards or Japanese Industrial Standards (JIS)Flanged ball bearing unitsThe flanged ball bearing units consist of a housing-mounted housing with a housing bearing that can be bolted to the machine wall or frame.

UCF210-113D1 Pillow Block Bearing / Pillow Housings: Supplied with a fully sealed bearing insert fitted in the housing and includes a grease nipple to facilitate re-lubrication. The bearing insert has 2 grub screws to allow tightening against the shaft once fitted.

Product Description:6063 Aluminum rods are used to make electronic equipment housing frames, radiators and other components.

Miniature Flanged Ball Bearing are simple structure and easy to use, are the most widely application bearing, mainly used to support radial load.  This kind of bearings with small friction coefficient, low noise, high speed limit, but is not able to bear impact strike, not suitable for a heavy load.  According to the user's requirements, we can provide high precision (P6 ,P5), all kinds of clearance and vibration noise level (Z1 and Z2 or V1, V2) bearing.The flanged bearing enables the bearings to be axially located in the housing, such an arrangement is very simple in design and

Since a bearing can choose different bearing seats, and a bearing seat can choose different types of bearings at the same time, there are many varieties of bearing seats. Bearing seat is included, many large foreign bearing companies also have their own bearing seat type record. However, the same bearing housing model is not marked exactly the same in different company samples.

Products mainly used in farming machinery include outer spherical ball bearings and housing units, sealed deep groove ball bearings and angular contact ball bearings, tapered roller bearings, hexagonal and square bore bearings, as well as idler and chain drive gear tooth units.The perfect seal design means that the bearing has a significantly longer service life than its peers, even under harsh working conditions. The large capacity of the grease storage space ensures that the sealed bearing does not require any maintenance.

Bearing seat is an important part of supporting and fixing bearing, and its processing technology design directly affects the accuracy, life and reliability of bearing seat. Bearing housing is usually made of high-strength alloy steel or cast iron to meet its requirements for high load and wear resistance. Secondly, the design of the process flow is the core of the bearing seat processing technology. Usually, the processing of the bearing seat includes casting, roughing, finishing, heat treatment, surface treatment and other links.

· The thrust ball bearing consist of a shaft washer, a housing washer and a ball  and cage thrust assembly.· The bearings are separable so that mounting is simple as the washers and the ball and cage  assembly can be mounted separately.· The types: bearings with a flat seat surface on the housing washer, bearings with a&nbs

The outer ring of the needle roller bearing is precisely stamped with thin steel plate, which has small structural space and large load capacity. It is suitable for occasions where installation space is limited and housing holes are not suitable for raceway.

Thrust ball bearings are produced as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.Thrust ball bearings are separable, the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft washers have a ground bore to enable an interference fit.

Thrust cylindrical roller bearings and thrust roller bearings are suitable for low speed occasions, the thrust tapered roller bearing speed is slightly higher than the thrust cylindrical roller bearing. Bearing knowledgeThrust cylindrical roller bearings are separated bearings and can only withstandThe unidirectional axial load and slight impact can limit the axial displacement of the shaft (or housing) in one direction, so it can be used for unidirectional axial positioning. However, its carrying capacity is much greater than that of thrust ball bearings.

The unidirectional thrust ball bearing comprises a shaft ring, a seat ring and a ball-cage assembly. It can be separated and the shaft ring, seat ring, ball-cage assembly can be installed separately. Unidirectional thrust ball bearings can withstand the axial load in a single direction and can be positioned in a single direction, but must not bear any radial load.The 51130 belongs to the single direction thrust ball bearings, also called ball thrust bearings or axial deep groove ball bearings. These bearings consist of a shaft ring, a housing ring and a ball and cage assembly.

The structure of the thrust roller bearing is generally composed of an inner and outer ring, a thrust roller, a cage and a sealing ring. The inner and outer rings are annular structures, which are installed on the shaft and the housing to carry the axial load. The thrust roller is cylindrical or conical, arranged between the inner and outer rings, and can effectively withstand and transfer the axial load. The cage is a structure that supports and holds the thrust roller, usually made of steel or copper.

Rotary bearing is an important mechanical component, which is widely used in various industrial equipment and mechanical devices. It bears the radial load, axial load and moment load under the rotating motion, and plays the role of support and rotation. The following will introduce the structure, working principle, application field and maintenance of the rotary support bearing in detail.Rotary support bearings are usually composed of an inner ring, an outer ring, a rolling element (ball, roller, etc.) and a cage.

Product Description:4/8 galvanized steel plate is a half-inch galvanized steel plate, which has high yield strength and tensile strength, and can withstand large tensile, compression and bending forces and is not easy to deformation.

Product Description:In some of the electromagnetic shielding requirements are not particularly high, but the strength and processing accuracy of the requirements of electronic equipment shell manufacturing, such as small electronic instrument shell, consumer electronic products, etc., 2011 aluminum rod is a good choice.

Combined needle roller bearings, a special type of bearing, can be added between the inner and outer rings of the needle roller components to achieve balance accuracy, reduce vibration and noise effects.

Product Description:S320GD+Z Galvanized Steel Coils are engineered for superior strength and corrosion resistance. These coils boast a robust zinc coating that provides excellent protection against rust and atmospheric corrosion, making them suitable for a variety of construction and industrial applications where durability is key.

Some typical insulating bearing materials include ceramic, graphite and the famous polytetrafluoroethylene (PTFE). Ceramics are widely used in the bearing industry because of their hard diamond, wear-resistant gold and outstanding insulation properties. Graphite is widely used in bearings because of its extremely low friction and high lubrication. PTFE is widely used because of its excellent corrosion resistance and strong insulation. According to actual needs, designers and engineers can also choose other special materials to build insulated bearings.

Flange linear bearing is a common mechanical component, and its role is very important. Its main function is to support and guide two parts in relative motion, so that they can move smoothly with each other. At the same time, it can also withstand the load and torque from these moving parts to ensure the normal operation of the mechanical system.First of all, flanged linear bearings play a supporting role in mechanical equipment. It can withstand gravity and other loads perpendicular to the axis to ensure the stability and reliability of the parts to be supported.

Double-row tapered roller bearings have many advantages in structure and performance, so they are widely used in industrial production.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.237700090000.154302067206E306217.543.250.5600075000.231302077207E35721754.263.5530067000.331302087208E4080186374500063000.422302097209E45851967.883.5450056000.474