Spherical Roller Thrust Bearing-manufacture,factory,supplier from China

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

Thrust roller bearing is an important mechanical part, which is used to support the axial load acting on the rotating parts. Its use is directly related to the stable operation and life of mechanical equipment, so it should be paid attention to. Advantages of thrust roller bearings The processing technology of thrust roller bearings is very precise, and the production accuracy of its inner ring, outer ring and raceway can reach sub-micron level.

The structure of the thrust roller bearing is generally composed of an inner and outer ring, a thrust roller, a cage and a sealing ring. The inner and outer rings are annular structures, which are installed on the shaft and the housing to carry the axial load. The thrust roller is cylindrical or conical, arranged between the inner and outer rings, and can effectively withstand and transfer the axial load. The cage is a structure that supports and holds the thrust roller, usually made of steel or copper.

Thrust roller bearing is a type of bearing specially designed to bear axial loads, which consists of thrust rollers to provide good support and stability during high-speed rotation. Thrust roller bearings are usually used in parts of mechanical equipment that need to withstand high axial loads, such as gear boxes, turbines, centrifuges, etc.

Thrust roller bearings are used to bear axial and radial combined loads based on axial loads, but the radial load shall not exceed 55% of the axial load.

Roller bearings are designed for extremely demanding applications and must support high loads, severe misalignment, environmental pollution, shock and vibration. Due to the highest load rating in the industry and production from factories near you, there is no reason to look for self-aligning roller bearings anywhere else.TypeCylindrical roller thrust bearingTapered roller thrust bearingSelf aligning roller thrust bearingSelf aligning roller thrust bearing is a kind of self-aligning bearing. In use, the maximum allowable shaft deviation is about 2 degrees.

The working principle of thrust roller bearing is to transmit and bear axial load through the linear movement of thrust roller. When the axial load acts on the bearing, the thrust roller will roll along the slide of the inner and outer rings to realize the load transfer.

Outer spherical bearing with seat is a high-precision component product composed of greased sealed deep groove ball bearings and bearing seats of various shapes.

The inner and outer rings are made of high-quality bearing steel material, with good hardness and wear resistance, and can withstand high-speed rotation and heavy load conditions.The roller adopts cylindrical or conical design, which can effectively share the radial and axial load, reduce rolling friction, and improve the rotation efficiency of the bearing.The cage is made of steel or copper material, with good strength and toughness, which can support the roller stably and extend the service life of the bearing during high-speed operation.The aligning design can automatically adjust the relat

Angular contact thrust ball bearings consist of an inner, outer ring, cage, steel ball and groove, and an inner/outer ring with a spherical surface, which can withstand unidirectional and bidirectional axial loads and slight radial loads.

Thrust tapered roller bearings can form a very compact bearing configuration, which can withstand very heavy axial loads, is not sensitive to impact loads, and has good rigidity. LYTBZ produces unidirectional tapered roller bearings and bidirectional tapered roller thrust bearings. The screw fixed bearing constitutes a specially designed unidirectional tapered roller thrust bearing and is filled with rollers.Thrust tapered roller bearing features:This bearing is used for rolling mill screw fixed bearing configuration.

Thrust cylindrical roller bearings and thrust roller bearings are suitable for low speed occasions, the thrust tapered roller bearing speed is slightly higher than the thrust cylindrical roller bearing. Bearing knowledgeThrust cylindrical roller bearings are separated bearings and can only withstandThe unidirectional axial load and slight impact can limit the axial displacement of the shaft (or housing) in one direction, so it can be used for unidirectional axial positioning. However, its carrying capacity is much greater than that of thrust ball bearings.

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342

Products mainly used in farming machinery include outer spherical ball bearings and housing units, sealed deep groove ball bearings and angular contact ball bearings, tapered roller bearings, hexagonal and square bore bearings, as well as idler and chain drive gear tooth units.The perfect seal design means that the bearing has a significantly longer service life than its peers, even under harsh working conditions. The large capacity of the grease storage space ensures that the sealed bearing does not require any maintenance.

1.Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations, which can withstand heavy loads and vibration loads without difficulty.2. this kind of bearing can bear a large axial load in a single direction, but can not bear radial load, they do not have automatic aligning ability.3. the thrust cylindrical roller bearing can be divided into thrust cylindrical roller and cage assembly, shaft ring and seat ring.4.

The popular riding machine for a stud kind cam follower is a slot, for use with a flat head screwdriver. However, hex sockets are accessible for greater torquing ability, which is specifically beneficial for eccentric cam followers and these used in blind holes.

Iko is a well-known company specializing in the production of various types of bearing products, and its tapered roller bearings are one of its product series. Tapered roller bearing is a common type of bearing, mainly used in mechanical transmission fields, such as automotive, aerospace, engineering machinery and other fields.Iko tapered roller bearings have the following characteristics: First, the structural design is reasonable, mainly composed of inner ring, outer ring, roller and cage.

Auto Wheel Hub Bearing 90366-T0031 KOYO STA5383 automotive bearing STA5383 LFT for HILUXKOYO brand STA5383 automotive bearing STA5383LFT Tapered Roller Bearing STA 5383 LFTTapered roller bearings consist of four basic components including: the cone (inner ring), the cup (outer ring), tapered rollers, and a cage (roller retainer). The cone, cup and rollers carry the load while the cage spaces and retains the rollers on the cone. The cone, rollers and cage components of our tapered roller bearings are referred to as the cone assembly.

Thrust roller bearings have the following application characteristics:Withstand large axial load: thrust roller bearings are suitable for mechanical equipment that needs to withstand large axial load, and have high carrying capacity and stability.High-speed rotation: thrust roller bearings can provide good support and smooth operation when rotating at high speed, suitable for fast equipment.Long service life: Because thrust roller bearings can effectively reduce friction and wear, they have a long service life and reliability.Easy installation and maintenance: thrust roller bearings have simpl

The bidirectional thrust ball bearing is composed of an inner and outer sphere, a steel ball and a cage. The inner and outer spheres are spherical, the steel balls are distributed between the two spheres, and the cage is used to maintain the spacing and distribution of the steel balls. When stressed, the inner ring and the outer ring bear axial and radial forces respectively, and the steel ball transfers force by rolling.

Railway bearing is a kind of application in railway bearing, wheel bearing railway locomotive vehicle shaft systems with different application conditions with different structural design, locomotives, passenger car axle box, bearing through the axle box connected to the bogie, railway wagon axle box, bearing with bogie side frame connected by load-bearing saddle bearing wheel and impact load between the bogie frame, and more Corners is under the axial load of wheel bearing structure contains a cylindrical roller bearing, cylindrical roller bearing unit, taper roller bearing, tapered roller bea

Flange bearing is a kind of bearing widely used in various mechanical equipment, it has the following characteristics:Simple structure: flange bearings are usually composed of an inner ring, an outer ring, a rolling element and a cage, which is simple in structure and relatively easy to install and maintain.High load capacity: Flange bearings usually use spherical or tapered rollers and other rolling elements, with high load capacity and anti-fatigue characteristics.Self-positioning: Flange bearings can allow a certain degree of deflection and axial displacement during installation, and self-p

1.Needle roller bearings for stamping outer rings. There are two kinds of bearings: perforated type and sealed type. The needle roller bearing has no inner ring, and the needle roller directly contacts the surface of the shaft, so the processing accuracy and heat treatment hardness of the shaft should be the same as that of the bearing inner ring.2. Solid ring needle roller bearings solid ring needle roller bearings, commonly used solid ring needle roller bearings are NA type and RNA type.3. Roller needle bearing4. Needle roller and cage assembly.

Structure: Railway bearings are generally composed of inner ring, outer ring, rolling body and cage and other components. The inner ring is directly connected to the shaft, the outer ring is installed on the wheel, and the rolling body is located between the inner and outer rings, which reduces friction through rolling and maintains the normal operation of the bearing.