Small Needle Bearings-manufacture,factory,supplier from China

Strong bearing capacity: Due to the large number of needle roller, needle roller bearings have a high bearing capacity, suitable for bearing large radial and axial loads. (2) Small starting torque: the friction inside the needle roller bearing is small, and the starting torque is small, making the starting speed of the bearing faster. (3) Simple structure: The structure of needle roller bearings is relatively simple, easy to install and maintain, and low cost.

The separation bearing is composed of a racetrack ring, a needle roller and a cage assembly, and can be used in any combination to thin or thick racetrack rings. The non-separable bearing is an integral bearing composed of precision stamped raceway ring, needle roller and cage assembly that can withstand unidirectional axial loads. This bearing occupies a small space, which is conducive to the compact design of the machine.

The outer ring of the needle roller bearing is precisely stamped with thin steel plate, which has small structural space and large load capacity. It is suitable for occasions where installation space is limited and housing holes are not suitable for raceway.

Needle roller bearing is a common rolling bearing, using needle roller as the rolling body, can withstand the radial and axial load.Structure: Needle roller bearings are mainly composed of outer ring, inner ring, needle roller, cage and seal. The shape size of the needle roller bearing is small, saving space, suitable for limited space design.

Needle roller bearing is a common mechanical part, which is mainly used to support the movement of the rotating shaft. The working principle of the needle roller bearing is to use the rolling body (needle roller) to roll between the inside and outside, thereby reducing friction and resistance, so that the bearing can withstand larger loads and rotational speeds.The structure of the needle roller bearing is relatively simple, consisting of an inner ring, an outer ring, a needle roller and a cage.

Axial (Thrust) needle roller bearings are units comprising axial needle rollers and cage assemblies and axial bearing washers with a centring spigot. Axial (Thrust) needle roller bearings are able to accommodate heavy axial loads. They are insensitive to shock loads and provide a high degree of bearing units stiffness within a minimum axial space. They represent unidirectional bearings and can accommodate axial loads acting in one direction only.Using axial (thrust) needle roller bearings, it is possible to make compact bearing units.

Combined needle roller bearings, a special type of bearing, can be added between the inner and outer rings of the needle roller components to achieve balance accuracy, reduce vibration and noise effects.

 Thrust needle and retainer assembly are comosed of a set of tray ring gaskets combined with retainer with roller bearings.The stand leads and holds many rolling elements.The thrust needle bearings or thrust-cylindrical roller bearings can support the bearings with the axial directional load and so the can be used as the bearings with good rigidity and minium axial occupied spaces.If the surface of the adjacent parts can be used as a tray for the rolling needles and the holding stand assembly should be recommended when the support space is big enough so that a small axial cross secti

IKO is a well-known manufacturer specializing in the production of various types of needle roller bearings, and its needle roller bearing products enjoy a high reputation around the world. IKO's needle roller bearings have a variety of excellent characteristics, and the following will describe the characteristics and applications of its needle roller bearings in detail.First of all, IKO's needle roller bearings are made of high-quality materials, have extremely high wear resistance and corrosion resistance, and can operate stably in a variety of harsh environments.

»drawn cup needle roller bearings                            »solid needle roller bearings»combined needle roller bearings                             »drawn cup roller clutch»heavy duty needle roller bearings                           »sealed needle bearings»thrust needle roller bearings                           

Flange bearing is a kind of bearing widely used in various mechanical equipment, it has the following characteristics:Simple structure: flange bearings are usually composed of an inner ring, an outer ring, a rolling element and a cage, which is simple in structure and relatively easy to install and maintain.High load capacity: Flange bearings usually use spherical or tapered rollers and other rolling elements, with high load capacity and anti-fatigue characteristics.Self-positioning: Flange bearings can allow a certain degree of deflection and axial displacement during installation, and self-p

Because the bearing ball is in contact with the bearing point, the load is small.

INA needle roller bearings have excellent quality and performance and are widely used in various industrial fields. It uses needle roller as the rolling body, compared to ball bearings, needle roller bearings have higher load capacity and smaller dimensions, suitable for limited installation space.

The working principle of needle roller bearings is to use rolling friction to reduce friction and resistance. When the bearing is subjected to axial or radial load, the needle roller rolls between the inner and outer rings, thereby reducing friction and resistance.

Secondly, IKO's needle roller bearings are compact in structure, light in weight, easy to install, simple and stable in structure, which can effectively reduce the overall size and weight of mechanical equipment, improve the work efficiency and flexibility of mechanical equipment, and are suitable for various axial and radial loads.In addition, IKO needle roller bearings have high bearing capacity and fatigue resistance, can run stably for a long time, extend the service life of the equipment, reduce the frequency of maintenance and replacement of bearings, reduce the maintenance cost of t

In order to ensure the performance and service life of rotary support bearings, it is necessary to pay attention to the following points: correct selection of suitable bearing models and specifications, reasonable design and arrangement of bearing bearings and lubrication systems, regular inspection and maintenance of bearings, timely replacement of severely worn parts, to avoid overload and overspeed operation, to prevent dust and dirt intrusion into the bearing interior.

1.Needle roller bearings for stamping outer rings. There are two kinds of bearings: perforated type and sealed type. The needle roller bearing has no inner ring, and the needle roller directly contacts the surface of the shaft, so the processing accuracy and heat treatment hardness of the shaft should be the same as that of the bearing inner ring.2. Solid ring needle roller bearings solid ring needle roller bearings, commonly used solid ring needle roller bearings are NA type and RNA type.3. Roller needle bearing4. Needle roller and cage assembly.

One of the largest aspects of the needle curler bearing is the sketch of the needle roller. The needle roller has a smaller diameter than different sorts of rolling elements, so it can obtain a greater load carrying capability in a constrained space.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

Product Description:Manufacture a variety of mechanical structural components, such as machine workbench, robot arms, etc.

1: High load capacity and accuracyThe internal structure of the bearing is the same as that of the single row deep groove ball. While bearing a large radial load, it can bear axial loads in both directions.The accuracy of the bearing is the same as that of the general accuracy, and it has high rotation accuracy and good high-speed performance2: reasonable aligning structure and the most suitable cooperationThe bearing assembly has the aligning property through the spherical outer diameter bearing and the bearing seat with the spherical inner hole.

Product Description:The 6063 Aluminum Pipe is a medium-strength alloy with excellent extrudability, corrosion resistance, and surface finish.

Product Description:Because of its strength and good plasticity, hot rolled low carbon steel coil can withstand various loads in building structures, and is widely used in the construction industry to make various building structural parts, such as steel beams, steel columns, roof trusses and so on.