SKR 6200 Deep Groove Ball Bearing-manufacture,factory,supplier from China

Single row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with dust cover and sealing ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringSingle row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with seal ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringDeep groove ball bearing is the most representative rolling bearing, widely used.

Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance. This kind of bearing has the advantages of small friction coefficient, high limit speed, simple structure, low manufacturing cost and easy to achieve high manufacturing accuracy.Deep groove ball bearings mainly include the following common types:1. Open deep groove ball bearing2. Deep groove ball bearings with a stop groove in the outer ring3. Deep groove ball bearing with dust cover4.

NACHI bearing deep groove ball bearings with dust cover and deep groove ball bearings with sealing rings have been filled with appropriate grease during assembly, should not be heated or cleaned before installation, do not need to lubricated during use, adapt to the operating temperature between -30℃ and +120℃.Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance.

 Deep Groove Ball Bearings Deep Groove Ball Bearings are highly versatile and extensively used in various industries due to their ability to support higher radial loads and moderate axial loads.

The deep groove ball bearing with dust cover and sealing ring has been filled with appropriate grease during assembly, and should not be heated or cleaned before installation. No further lubrication is required during use, and the operating temperature is between -30 ° C and +120 ° C.NSK deep groove ball bearings generally consist of two bearing rings with complete raceways. The rolling element is mounted between the rings and rolled on the raceway. The rolling parts can be balls, cylindrical rollers, needle rollers, tapered rollers, or barrel rollers.

1. Deep groove ball bearing with dust coverDeep groove ball bearings with dust cover are divided into Z type and 2Z type. When used under environmental conditions where lubrication is difficult or lubricating oil is inconvenient, the bearing interior is usually injected with anti-rust and lubricating dual-purpose lithium based grease, and the lubrication amount is 1/4 to 1/3 of the bearing internal space.2.

UBC bearings enjoy a high reputation in the international market, and their products are widely used in mechanical engineering, automotive industry, power industry and other fields.UBC bearings have a wide range of product lines, including deep groove ball bearings, tapered roller bearings, cylindrical roller bearings, angular contact ball bearings and other types of bearings. The characteristics of these products include high speed performance, strong wear resistance, long service life and other advantages, and are widely used in various industrial fields.

Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types  1 Type: Single row deep groove ball bearings,Stainless steel deep groove ball bearings,Single row deep groove ball bearings with filling slots,Double row deep groove ball bearings 2.

NTN deep groove ball bearing is a common rolling bearing, widely used in various mechanical equipment and industrial fields. The deep groove ball bearing consists of an inner ring, an outer ring, a ball and a cage, and is designed to withstand radial and axial loads and maintain stable operation at high speeds. The structure, performance and application characteristics of NTN deep groove ball bearings will be introduced in detail below.

First of all, one of the characteristics of FAG deep groove ball bearings is a simple structure, consisting of an outer ring, an inner ring, a steel ball and a cage. This simple structure makes the installation and maintenance of deep groove ball bearings more convenient and fast.Secondly, the bearing capacity of FAG deep groove ball bearings is large and can withstand both radial and axial loads.

Application: NTN deep groove ball bearings are widely used in automobiles, motorcycles, power tools, motors, pumps, fans, transmission devices and other mechanical equipment and industrial fields. Its reliable performance and high-quality materials make it an indispensable and important part of industrial equipment.In summary, NTN deep groove ball bearings have the characteristics of reasonable structure, excellent performance and wide application, and are suitable for mechanical equipment in a variety of industrial fields, providing stable and reliable support for equipment operation.

Ball bearing with eccentric locking collar is  outer diameter in spherical surface,internal construction is the same as deep groove ball bearings of 6200 6300 series.they both can sustain radial and axial loads.We can supply full series of UC200,UC300,SA200,SB200,UEL200,UK200,SER200,CS200,UC300 series bearings.Such bearings are often used in severe operating conditions where they are exposed to dirts,moisture and high temperature.thus,insert ball bearing are usually with grease groove and oil hole on outer ring,at suitable time,we need to replace fresh grease to secure full performance an

Deep groove ball bearings are available in a variety of sizes and are the most popular of the rolling bearings. This type of bearing supports radial load and a small degree of axial load in both directions simultaneously. Deep groove ball bearings are popular due to their versatility, affordability, and capability to run at high speeds. Most bearings in the 6000 series up to 60mm bore can be made available in stainless steel (AISI 440C material) upon request. 

Deep groove ball bearings are the most commonly used rolling bearings. Its structure is simple and easy to use. It is mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has a certain angular contact ball bearing performance and can bear the combined radial and axial load.

The sealing and protection of truck bearings are also very important. Trucks often drive in a variety of harsh road conditions, bearing in dust, water vapor and chemicals and other corrosive environment. In order to extend the life of the bearing, it is necessary to take into account the sealing property in the design, and select the appropriate sealing material and structure.Truck bearings also have certain requirements on installation and maintenance. Proper installation and proper lubrication are the keys to ensure the normal operation of truck bearings.

Products mainly used in farming machinery include outer spherical ball bearings and housing units, sealed deep groove ball bearings and angular contact ball bearings, tapered roller bearings, hexagonal and square bore bearings, as well as idler and chain drive gear tooth units.The perfect seal design means that the bearing has a significantly longer service life than its peers, even under harsh working conditions. The large capacity of the grease storage space ensures that the sealed bearing does not require any maintenance.

CAM bearing is a mechanical device used to drive camshaft, its main role is to achieve effective transmission and support between camshaft and other components in the engine. CAM bearings are usually made of metal materials and are subjected to greater pressure and friction in high-speed engines. The design and quality of CAM bearing directly affect the performance and life of engine.CAM bearings usually include camshaft, shaft sleeve, needle roller, steel ball and other components.

1.Needle roller bearings for stamping outer rings. There are two kinds of bearings: perforated type and sealed type. The needle roller bearing has no inner ring, and the needle roller directly contacts the surface of the shaft, so the processing accuracy and heat treatment hardness of the shaft should be the same as that of the bearing inner ring.2. Solid ring needle roller bearings solid ring needle roller bearings, commonly used solid ring needle roller bearings are NA type and RNA type.3. Roller needle bearing4. Needle roller and cage assembly.

Insulating materials: insulated bearings are usually made of insulating materials, such as ceramics or special alloys, whose insulation properties can effectively prevent the current from being transmitted through the bearing to other components and play a protective role.Application: insulated bearings are widely used in electrical equipment, motors, generators, frequency converters, wind turbines, electric vehicles and other fields, especially suitable for occasions that need to prevent current conduction.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

Truck hub units, which contain two tapered roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. The wheel bearing units are intended for use in truck, trailer and buses. They are designed to withstand typical harsh operating conditions and require less maintenance than the conventional wheel bearing sets they replace. Some variants have an integrated impulse ring which makes some variants suitable for use with anti-lock braking systems.

Product Description:ASTM A36 carbon steel plates are used in the manufacture of mechanical parts such as bases, brackets, etc.

Product Description:As a raw material for manufacturing shaft, rod, bracket and other mechanical parts. The mechanical properties of 6005 aluminum rods, including strength, hardness and toughness, can meet most machining requirements.

Hub bearing (HUB) is the main role of load-bearing and provide accurate guidance for the rotation of the hub, it bears both axial load and radial load, is a very important component. The traditional automobile wheel bearing is composed of two sets of tapered roller bearing or ball bearing. The installation, oiling, sealing and clearance adjustment of the bearing are all carried out on the automobile production line.