Single Row Taper Roller Bearing 32309-manufacture,factory,supplier from China

Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction.The type code of tapered roller bearings is 30,000, and tapered roller bearings are separable bearings.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

Single row tapered roller bearing is a common rolling bearing, which is composed of an inner ring, an outer ring, a roller and a cage. Its structure is similar to a conical shape, which is why it gets its name.The contact points on the inner and outer rings are conical and suitable for bearing large loads in both radial and axial directions.

Cross roller bearing is a special kind of rolling bearing, which is widely used in mechanical field. It is designed to meet large size equipment that needs to operate under the requirements of high load capacity, high rigidity and high rotational accuracy. The cross roller bearing is composed of inner and outer rings, rollers, sealing rings and cages, and its structural advantages are that it can withstand both radial and axial loads, with high torque rigidity and running accuracy. The following will introduce the characteristics and applications of cross roller bearings in detail.

Inch taper/tapered roller bearings belong to separable bearing, as the outer ring, also called cup, is separable and easy for assembly.

Railway shaft double row tapered roller bearings have the following characteristics:High load bearing capacity: Double row tapered roller bearings are designed with two rows of rollers, so they can withstand large radial and axial loads.High temperature resistance: suitable for high-speed operation and high temperature environment, with good heat resistance.Strong aligning ability: can maintain good working performance when bearing installation is not accurate or axial displacement.Easy assembly and disassembly: double row tapered roller bearing structure is relatively simple, easy disassembly

1) Less coefficient of friction, High limiting speed, Large size range, Variations of structure.2) Tapered Roller Bearings are designed such like cup. Cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis.3) Single-row tapered roller bearing is able to carry radial and axial load in one directionssimultaneously because an axial component of produced when this type of bearings loadedradically, two bearings are used together facing one another, or two or more bearings arematched and used.

Tapered roller bearings are separated bearings, and the inner and outer rings of the bearings are equipped with tapered raceways. This kind of bearing is divided into single row, double row and four row tapered roller bearings and other different structural types according to the number of rows of rollers installed. Single-row tapered roller bearings can withstand radial loads and axial loads in a single direction.

Iko tapered roller bearings are also very convenient in terms of installation and maintenance.

Four row tapered roller bearings are mainly used for work rolls, support rolls, and billet breakers of various plate and strip rolling mills. The clearance of the bearing is changed by adjusting the thickness of the spacer to make it more suitable for the working condition.1. Strong bearing capacity: four row tapered roller bearings can withstand greater loads under the same size, because it is shared by multiple rollers, so it has higher carrying capacity and better distribution performance.2.

IKO's needle roller bearings have high bearing capacity and fatigue resistance, can run stably for a long time, extend the service life of the equipment, reduce the frequency of maintenance and replacement of bearings, reduce the maintenance cost of the equipment, and improve the reliability and stability of the equipment.IKO's needle roller bearings are widely used in various industrial equipment and mechanical devices, such as automobile engines, aircraft engines, high-speed trains, construction machinery, agricultural machinery and other fields.

We provide a full range of UBC bearings, and focus on bearing categories, if you want to buy ubc bearings, please contact us for a ubc price list.UBC Cylindrical Roller BearingsCylindrical roller bearings are designed for high radial load applications. The bearing designs are available in single row, double row, multiple row, cage or fully complementary construction.

Double-row tapered roller bearings are usually used in applications that require large loads and high-speed rotation, such as wind turbines, metallurgical equipment, rolling mills and heavy machinery, etc.

As one of the largest taper roller manufacturers in Shandong, China, in addition to the tapered roller bearings introduced above, we can also provide the following tapered roller types.

The range of four-row tapered roller bearings is wide, including not only the traditional design with an intermediate ring between the outer ring and/or the inner ring, but also the modification of the four-row tapered roller bearings with an integrated middle ring and the bearing ring.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.2377000900

According to whether the ring has a rib or not, NSK cylindrical roller bearings are divided into NU, NJ, NUP, N, NF and other single-row bearings, and NNU, NN double-row bearings. The bearing is a structure with separable inner ring and outer ring. Cylindrical roller bearings with inner or outer rings without rims, the inner and outer rings can be axially moved relative to each other, so they can be used as free-end bearings.

UBC tapered roller bearing is a kind of rolling bearing with tapered roller, the roller and raceway between the inner ring (cone hub) and the outer ring (cup) intersect at the cone half Angle on the outer surface of the cone, so that the bearing can bear a large load in the radial and axial direction. UBC tapered roller bearings usually include single row, double row and four row structures, which are widely used in automotive, mechanical equipment, aerospace and other fields.

Performance characteristics:High load capacity: NTN deep groove ball bearings can withstand large radial and axial loads, suitable for a variety of mechanical equipment working conditions.High speed: the bearing structure is reasonable, the friction is small, can adapt to high-speed operation, to ensure the stability of the machine equipment.Low noise: NTN deep groove ball bearing manufacturing precision, smooth internal processing, smooth running, low noise.Long life: The use of high-quality bearing steel and excellent heat treatment process, with a long service life and good wear resistance.

NTN tapered roller bearings are mainly used to bear radial and axial combined loads mainly based on radial loads, with high stiffness and rotation accuracy, and have large bearing capacity and low limit speed compared with angular contact ball bearings. Its carrying capacity depends on the Angle of the raceway of the outer ring, and the greater the Angle, the greater the carrying capacity.

Product Description:Q195 carbon steel coil due to its good plasticity, can be used to manufacture light steel keel, can be easily processed into various shapes of keel, and can withstand a certain building load.

NTN angular contact bearing is a commonly used bearing type with excellent load bearing performance and stable rotation accuracy. This kind of bearing is usually composed of inner and outer rails and steel balls and other components, and is suitable for various mechanical equipment and transmission systems. The structural design of NTN angular contact bearings is called the contact Angle, which has the ability of the inner and outer rings to withstand radial and axial loads.

Thrust tapered roller bearings can form a very compact bearing configuration, which can withstand very heavy axial loads, is not sensitive to impact loads, and has good rigidity. LYTBZ produces unidirectional tapered roller bearings and bidirectional tapered roller thrust bearings. The screw fixed bearing constitutes a specially designed unidirectional tapered roller thrust bearing and is filled with rollers.Thrust tapered roller bearing features:This bearing is used for rolling mill screw fixed bearing configuration.

Product Description:The DX53D substrate has a lower carbon content than the DC01 substrate used in the DX51D+Z galvanized steel sheet.

Products mainly used in farming machinery include outer spherical ball bearings and housing units, sealed deep groove ball bearings and angular contact ball bearings, tapered roller bearings, hexagonal and square bore bearings, as well as idler and chain drive gear tooth units.The perfect seal design means that the bearing has a significantly longer service life than its peers, even under harsh working conditions. The large capacity of the grease storage space ensures that the sealed bearing does not require any maintenance.