Single Direction Bearing-manufacture,factory,supplier from China

Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction.The type code of tapered roller bearings is 30,000, and tapered roller bearings are separable bearings.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

The unidirectional thrust ball bearing comprises a shaft ring, a seat ring and a ball-cage assembly. It can be separated and the shaft ring, seat ring, ball-cage assembly can be installed separately. Unidirectional thrust ball bearings can withstand the axial load in a single direction and can be positioned in a single direction, but must not bear any radial load.The 51130 belongs to the single direction thrust ball bearings, also called ball thrust bearings or axial deep groove ball bearings. These bearings consist of a shaft ring, a housing ring and a ball and cage assembly.

Single Row Angular Contact BearingsThese single row angular contact bearings are suitable for general use where axial loads are applied in only one direction. They are stand-alone bearings and are not designed to be combined or mated with another bearing.Double Angular Contact BearingsDuplex bearings are two matched bearings that provide precise alignment both radially and axially. By using duplex bearings, vibrations can be eliminated and higher load capacities can be achieved.

Single direction thrust ball bearings:consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they must be supported so that all balls can be evenly loaded. Bearings carry the axial load only in one direction. They are not able to carry radial forces. Double direction thrust ball bearings:have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces. The shaft washer has raceways on both sides and is fixed on the journal.

Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations that can withstand heavy loads and vibration loads without difficulty. Such bearings can withstand large axial loads in a single direction, but they cannot withstand radial loads, and they have no automatic aligning capability.

Thrust ball bearings are produced as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.Thrust ball bearings are separable, the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft washers have a ground bore to enable an interference fit.

Tapered roller bearings are separated bearings, and the inner and outer rings of the bearings are equipped with tapered raceways. This kind of bearing is divided into single row, double row and four row tapered roller bearings and other different structural types according to the number of rows of rollers installed. Single-row tapered roller bearings can withstand radial loads and axial loads in a single direction.

Cross roller bearing is a special kind of rolling bearing, which is widely used in mechanical field. It is designed to meet large size equipment that needs to operate under the requirements of high load capacity, high rigidity and high rotational accuracy. The cross roller bearing is composed of inner and outer rings, rollers, sealing rings and cages, and its structural advantages are that it can withstand both radial and axial loads, with high torque rigidity and running accuracy. The following will introduce the characteristics and applications of cross roller bearings in detail.

UBC tapered roller bearing is a kind of rolling bearing with tapered roller, the roller and raceway between the inner ring (cone hub) and the outer ring (cup) intersect at the cone half Angle on the outer surface of the cone, so that the bearing can bear a large load in the radial and axial direction. UBC tapered roller bearings usually include single row, double row and four row structures, which are widely used in automotive, mechanical equipment, aerospace and other fields.

Angular contact ball bearing has high limit rotational speed, they can carry radial load and axial load simultaneously, they can also withstand purely radial load. The axial load carrying capacity depends on the magnitude of contact angle and increases with increasing contact angle. Since the rigidity of single-row angular contact ball bearings can be increased by preloading, they are often used in the main spindles of machine tools, for which high running accuracy is required.Single row angular contact ball bearings can carry axial load acting in one direction only.

Angular contact ball bearing 70000 type, composed of outer ring, inner ring, steel ball, cage.

Single course thrust ball bearings: consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they need to be supported so that all balls can be evenly loaded. Bearings lift the axial load solely in one direction. They are no longer capable to lift radial forces.Double path thrust ball bearings: have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces.

1.Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations, which can withstand heavy loads and vibration loads without difficulty.2. this kind of bearing can bear a large axial load in a single direction, but can not bear radial load, they do not have automatic aligning ability.3. the thrust cylindrical roller bearing can be divided into thrust cylindrical roller and cage assembly, shaft ring and seat ring.4.

Single row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with dust cover and sealing ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringSingle row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with seal ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringDeep groove ball bearing is the most representative rolling bearing, widely used.

IKO's needle roller bearings have high bearing capacity and fatigue resistance, can run stably for a long time, extend the service life of the equipment, reduce the frequency of maintenance and replacement of bearings, reduce the maintenance cost of the equipment, and improve the reliability and stability of the equipment.IKO's needle roller bearings are widely used in various industrial equipment and mechanical devices, such as automobile engines, aircraft engines, high-speed trains, construction machinery, agricultural machinery and other fields.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis, which means that they are designed to accommodate combined loads, i.e. simultaneously supporting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.

The ball screw pair has the characteristics of high precision, reversibility and high efficiency, which is the further extension and development of the ladder screw, and the important significance of this development is to change the sliding action of the ladder screw into a rolling action.

Linear bearings with flanges Performance: Linear bearings are a linear motion system produced at a low cost for use with unlimited travel and circular shafts. Because the bearing ball is in contact with the shaft dry point, the load is small. The steel ball rotates with very little friction resistance, thus achieving smooth motion with high precision.Flanged linear bearing series Specification classification :LME, LMK series LMH series LMFP, LMKP series with flanged linear bearing LMHP series with flanged linear bearing LME.LLMK.L series LMH.L series LMFP...

Inner and outer ring design: The internal and outer rings of the insulated bearing are made of insulating substances or different treatment, so that the modern-day interior the bearing can now not be carried out via the internal and outer rings, so as to reap the impact of electrical insulation.Seal design: The seal format of the insulated bearing is strict, which can efficaciously forestall the infiltration of exterior media and preserve the insulati

Hub bearing (HUB) is the main role of load-bearing and provide accurate guidance for the rotation of the hub, it bears both axial load and radial load, is a very important component. The traditional automobile wheel bearing is composed of two sets of tapered roller bearing or ball bearing. The installation, oiling, sealing and clearance adjustment of the bearing are all carried out on the automobile production line.

Product Description:Aluminized steel coil has good processability. It can carry out stamping, bending, cutting and other mechanical processing operations. During the stamping process, the aluminum plating layer can maintain good integrity and will not flake off easily.

Roller bearings are designed for extremely demanding applications and must support high loads, severe misalignment, environmental pollution, shock and vibration. Due to the highest load rating in the industry and production from factories near you, there is no reason to look for self-aligning roller bearings anywhere else.TypeCylindrical roller thrust bearingTapered roller thrust bearingSelf aligning roller thrust bearingSelf aligning roller thrust bearing is a kind of self-aligning bearing. In use, the maximum allowable shaft deviation is about 2 degrees.

Product Description:The density of 316 aluminum plate is relatively small, about 2.7g/cm³, which is much lighter than some steel and other metal materials, and has important application value in aerospace, automobile manufacturing and other industries that have strict requirements for weight.