Sealed Tapered Roller Bearings-manufacture,factory,supplier from China

Tapered roller bearings are separated bearings, and the inner and outer rings of the bearings are equipped with tapered raceways. This kind of bearing is divided into single row, double row and four row tapered roller bearings and other different structural types according to the number of rows of rollers installed. Single-row tapered roller bearings can withstand radial loads and axial loads in a single direction.

As one of the largest taper roller manufacturers in Shandong, China, in addition to the tapered roller bearings introduced above, we can also provide the following tapered roller types.

Advantage of 30307 Bearing• 302XX, 303XX, 313XX, 320XX, 322XX, 323XX and 329XX series• Double row tapered roller bearing series (details available on request)• Pressed steel and polyamide cages• Standard accuracy P0 and higher accuracy P6.• A variety of inch bearings are also availableTypeA singleSingle row tapered roller bearings can withstand combined radial and axial loads.

The range of four-row tapered roller bearings is wide, including not only the traditional design with an intermediate ring between the outer ring and/or the inner ring, but also the modification of the four-row tapered roller bearings with an integrated middle ring and the bearing ring.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.2377000900

NTN tapered roller bearings are mainly used to bear radial and axial combined loads mainly based on radial loads, with high stiffness and rotation accuracy, and have large bearing capacity and low limit speed compared with angular contact ball bearings. Its carrying capacity depends on the Angle of the raceway of the outer ring, and the greater the Angle, the greater the carrying capacity.

A double-row tapered roller bearing is a common bearing type that consists of two tapered rollers mounted on an inner ring and an outer ring. It can withstand large radial and axial loads and is able to maintain high accuracy and stiffness while rotating at high speeds.Double row tapered roller bearings are designed so that the inner and outer rings can be adjusted separately to achieve axial and radial preloading.

Iko tapered roller bearings have high load bearing capacity and wear resistance. Because of the conical roller design, the bearing can share the load evenly when bearing heavy loads, and the bearing capacity is effectively improved. At the same time, the use of high-quality materials and advanced manufacturing technology to ensure the bearing's wear resistance and extend the service life.Iko tapered roller bearings have high rotation accuracy and running stability.

Koyo tapered roller bearings are suitable for applications requiring simultaneous radial and axial loads, such as differential, hub, transmission and other components of automobiles, as well as wind turbines, agricultural machinery, construction machinery and other equipment requiring high load capacity and high rotation accuracy. The selection of suitable Koyo tapered roller bearings can improve the efficiency and reliability of machine equipment, reduce maintenance work and costs, and is an important bearing product widely used in various fields.

The working principle of Koyo tapered roller bearings is to use the rolling body to roll between the inner and outer rings, thereby reducing the contact area and reducing friction resistance. When the external radial or axial load is applied, the roller will bear the load between the inner and outer rings to achieve the function of supporting and transferring the load of the bearing. Rollers are designed so that they can equally share load when rotating, reduce local stress and extend service life.

Products mainly used in farming machinery include outer spherical ball bearings and housing units, sealed deep groove ball bearings and angular contact ball bearings, tapered roller bearings, hexagonal and square bore bearings, as well as idler and chain drive gear tooth units.The perfect seal design means that the bearing has a significantly longer service life than its peers, even under harsh working conditions. The large capacity of the grease storage space ensures that the sealed bearing does not require any maintenance.

The main uses of conical roller bearings include the following aspects1. Construction machinery field: Conical roller bearings are widely used in all kinds of heavy construction machinery and equipment, such as excavators, loaders, bulldozers, road rollers, cranes, etc. These equipment need to withstand large axial load and radial load, and have high speed and accuracy requirements, cone roller bearings can meet these requirements to ensure the normal operation of the equipment.2.

UBC tapered roller bearing is a kind of rolling bearing with tapered roller, the roller and raceway between the inner ring (cone hub) and the outer ring (cup) intersect at the cone half Angle on the outer surface of the cone, so that the bearing can bear a large load in the radial and axial direction. UBC tapered roller bearings usually include single row, double row and four row structures, which are widely used in automotive, mechanical equipment, aerospace and other fields.

Inch taper/tapered roller bearings belong to separable bearing, as the outer ring, also called cup, is separable and easy for assembly.

Four row tapered roller bearings are mainly used for work rolls, support rolls, and billet breakers of various plate and strip rolling mills. The clearance of the bearing is changed by adjusting the thickness of the spacer to make it more suitable for the working condition.1. Strong bearing capacity: four row tapered roller bearings can withstand greater loads under the same size, because it is shared by multiple rollers, so it has higher carrying capacity and better distribution performance.2.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

The structure of Koyo tapered roller bearings mainly includes an outer ring, an inner ring, a rolling body (roller) and a cage. The rolling element is located between the inner ring and the outer ring and is kept in the specified axial position by the cage. The contact Angle between the inner ring and the outer ring is generally between 10° and 30°, and different contact angles will affect the bearing capacity and speed limit.

Iko tapered roller bearings are also very convenient in terms of installation and maintenance.

1) Less coefficient of friction, High limiting speed, Large size range, Variations of structure.2) Tapered Roller Bearings are designed such like cup. Cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis.3) Single-row tapered roller bearing is able to carry radial and axial load in one directionssimultaneously because an axial component of produced when this type of bearings loadedradically, two bearings are used together facing one another, or two or more bearings arematched and used.

Double-row tapered roller bearings have many advantages in structure and performance, so they are widely used in industrial production.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.237700090000.154302067206E306217.543.250.5600075000.231302077207E35721754.263.5530067000.331302087208E4080186374500063000.422302097209E45851967.883.5450056000.474

Tapered curler bearing refers to the radial thrust kind rolling bearing whose rolling physique is a tapered roller. There are small cone angles and giant cone angles. The small cone Angle usually bears the radial and axial mixed hundreds ordinarily primarily based on radial loads, regularly used in double, reverse installation, the internal and outer seat rings can be established respectively, and the radial and axial clearance can be adjusted throughout set up and use.

Rotary support bearings are widely used in various mechanical equipment and construction machinery, such as cranes, rotary tables, machine tools, wind power equipment, drilling RIGS, excavators and so on. In these equipment, the rotary support bearing assumes the important role of supporting the rotating member, ensuring the normal operation of the equipment. At the same time, it is also widely used in high-end fields such as aerospace, ocean engineering, and automated production lines.

Angular contact ball bearing 70000 type, composed of outer ring, inner ring, steel ball, cage.

Agricultural bearings refer to the bearing products used in agricultural machinery and equipment, which carry the rotating parts of various agricultural equipment in the working process, and ensure its smooth operation and increase the life of mechanical equipment.

In railway applications, bearings need to comply with several customer requirements. These include the need for reliability, extended maintenance intervals, space-saving design capabilities and more.We offer solutions for a wide range of wheelset designs for all kinds of railway rolling stock.