S235JR Carbon Steel Plate-manufacture,factory,supplier from China

Product Description:The S235JR has a low carbon steel content and can be used in some non-critical parts of the vehicle, such as the interior panel of the carriage, spare tire frame, etc.

Product Description:Q345 carbon steel plate is used in the manufacture of petrochemical equipment tanks, pipelines, etc., as well as power equipment in the bracket, shell, etc.

Product Description:A36 carbon steel is a kind of low carbon steel, with good toughness, can withstand a certain impact and dynamic load, will not easily brittle fracture. Widely used in building structure frame, such as beams, columns and so on.

Product Description:The yield strength of AH36 carbon steel is not less than 355MPa, and the tensile strength is between 490-620 mpa.

Product Description:ASTM A36 carbon steel plates are used in the manufacture of mechanical parts such as bases, brackets, etc.

Product Description:Q195 carbon steel is mainly composed of iron (Fe) and a small amount of carbon (C), and the elongation is high, up to about 33% (standard distance 50mm).

Product Description:Q235 carbon steel is one of the most commonly used materials in building structures. It can be used to make main load-bearing structural components such as beams and columns of buildings. Its strength can withstand the building's own weight and external loads, such as wind and earthquake forces.

Product Description:SS400 carbon steel can be used for some non-critical structural components of the car body, such as some reinforcement plates and brackets inside the body.

Product Description:High carbon steel plates have a higher carbon content, usually between 0.60%-1.50%. Widely used in the manufacture of various cutting tools, such as cutting tools, saw blades, etc.

Product Description:The relatively low carbon content of Q295A steel makes the steel have good welding performance, which is convenient for site construction, and can be used to make the frame structure of the workshop, such as beams, columns, etc., and quickly build the main structure of the workshop.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A633, JIS G3101-2004, ASTM A678 ASTM A588, ASTM A242,etcMaterialA36,SS400,A283   Gr.A,.Gr.B.Gr.C,A285 Gr.A,.Gr.B.Gr.C,Q235,Q195,Q215,Q34

Product Description:Mild steel plates have a lower carbon content, usually no more than 0.25%. The lower carbon content makes the steel have good toughness, ductility and weldability. Used in the manufacture of home appliances, such as refrigerators, washing machines, air conditioners, etc.

Product Description:Q355B is widely used in high-rise buildings, long-span building structural frames, such as steel beams, steel columns, etc., because its high strength can effectively reduce the cross-section size of structural members. While meeting the requirements of structural strength and stability, it can reduce the building's self-weight and improve the utilization rate of building space.

Product Description:The quarter-inch galvanized steel plate is based on high-quality steel, usually low or medium carbon steel.

Product Description:Cold-rolled carbon steel coil is further processed by hot-rolled carbon steel coil as raw material. It is widely used in household appliances, such as refrigerators, washing machines, air conditioners, etc.

Product Description:Q215 carbon steel coil is one of the commonly used materials for manufacturing welded steel pipes. Through crimping, welding and other processes, carbon steel coils can be made into steel pipes of different diameters and wall thicknesses, which are widely used in water supply and drainage, gas transmission, heating pipes and other fields. It can also be used to manufacture various accessories in the pipeline system, such as elbows, tees, quads, etc.

Product Description:Hot-rolled carbon steel coils are made by rolling billets at high temperatures (usually heated to around 1000-1250 °C). Widely used in the manufacture of various mechanical parts, such as shafts, gears, connecting rods and so on.

Product Description:The S275 carbon steel coil is made of rolled steel. This roll form is easy to store and transport and takes up relatively little space.

Product Description:Q195 carbon steel coil due to its good plasticity, can be used to manufacture light steel keel, can be easily processed into various shapes of keel, and can withstand a certain building load.

Product Description:Q355B carbon steel coil has high strength and good plasticity, in the field of machinery manufacturing, can be used to manufacture key parts of heavy machinery, such as crane boom, mining machinery wear-resistant parts.

Product Description:The manufacture of mechanical support and base is an important application of A36 carbon steel coil in mechanical manufacturing. For example, the base of the machine tool, the chassis support of the construction machinery, etc., need enough strength to support the weight of the equipment and withstand various forces during the work process.

Product Description:NM400 and NM500 are wear-resistant steel plates, mainly used for occasions requiring high wear resistance.

Product Description:DX52D+Z Galvanized Steel Plate is a premium-grade steel product that combines the strength of cold-rolled steel with the protective properties of zinc coating. This high-performance material is engineered for applications demanding both structural integrity and resistance to corrosion.

Product Description:4/8 galvanized steel plate is a half-inch galvanized steel plate, which has high yield strength and tensile strength, and can withstand large tensile, compression and bending forces and is not easy to deformation.

Product Description:The DX53D substrate has a lower carbon content than the DC01 substrate used in the DX51D+Z galvanized steel sheet.