Radial Thrust Ball Bearing-manufacture,factory,supplier from China

Advantage of 51118 BearingApplication scope of thrust ball bearing:It is only applicable to the parts bearing one side of axial load and low speed, such as crane hook, vertical water pump, vertical centrifuge, Jack, low-speed reducer, etc.The shaft ring, seat ring and rolling element of the bearing are separated and can be installed and disassembled separately.TypeIn addition, the bearing can bear axial load, but can not bear radial load.Composition of thrust ball bearing: the thrust ball bearing is composed of seat ring, shaft ring and steel ball cage assembly.

Angular contact thrust ball bearings consist of an inner, outer ring, cage, steel ball and groove, and an inner/outer ring with a spherical surface, which can withstand unidirectional and bidirectional axial loads and slight radial loads.

The bidirectional thrust ball bearing is composed of an inner and outer sphere, a steel ball and a cage. The inner and outer spheres are spherical, the steel balls are distributed between the two spheres, and the cage is used to maintain the spacing and distribution of the steel balls. When stressed, the inner ring and the outer ring bear axial and radial forces respectively, and the steel ball transfers force by rolling.

Thrust ball bearings are produced as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.Thrust ball bearings are separable, the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft washers have a ground bore to enable an interference fit.

Single course thrust ball bearings: consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they need to be supported so that all balls can be evenly loaded. Bearings lift the axial load solely in one direction. They are no longer capable to lift radial forces.Double path thrust ball bearings: have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces.

The unidirectional thrust ball bearing comprises a shaft ring, a seat ring and a ball-cage assembly. It can be separated and the shaft ring, seat ring, ball-cage assembly can be installed separately. Unidirectional thrust ball bearings can withstand the axial load in a single direction and can be positioned in a single direction, but must not bear any radial load.The 51130 belongs to the single direction thrust ball bearings, also called ball thrust bearings or axial deep groove ball bearings. These bearings consist of a shaft ring, a housing ring and a ball and cage assembly.

As one of the leading thrust ball bearing manufacturers in China, we can provide standard thrust ball bearings, stainless steel thrust ball bearings, ceramic thrust ball bearings, one-way thrust ball bearings, thrust angular contact ball bearing, axial ball thrust bearings, miniature thrust ball bearings Bearings, banded roller thrust bearings, deep groove ball thrust bearing, bearing dimensions support metric and inches. Various sizes can also be customized according to customer needs.

Single direction thrust ball bearings:consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they must be supported so that all balls can be evenly loaded. Bearings carry the axial load only in one direction. They are not able to carry radial forces. Double direction thrust ball bearings:have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces. The shaft washer has raceways on both sides and is fixed on the journal.

The structure of one-way thrust ball bearing is relatively simple, mainly composed of outer ring, inner ring, steel ball, cage and cover.The outer ring is the outermost part of the thrust ball bearing, usually made of steel material. The inner ring is located inside the outer ring, and the gap between the outer ring is the movement space of the steel ball. The steel ball is the key component connecting the outer ring and the inner ring, which can provide the function of carrying the thrust load.

Features :Thrust ball bearings consist of two precision washers (rings) and a ball complement spaced by retainer. They can besupplied with or without radius ball grooves in the rings.

Thrust roller bearings are used to bear axial and radial combined loads based on axial loads, but the radial load shall not exceed 55% of the axial load.

· The thrust ball bearing consist of a shaft washer, a housing washer and a ball  and cage thrust assembly.· The bearings are separable so that mounting is simple as the washers and the ball and cage  assembly can be mounted separately.· The types: bearings with a flat seat surface on the housing washer, bearings with a&nbs

The main features of rotary support bearings include high bearing capacity, fast speed, small friction, wear resistance, simple structure, easy installation and so on. It can withstand large axial and radial loads, while having high rigidity and accuracy, suitable for high-speed rotation and precision positioning requirements. Different types of rotary support bearings have differences in structural form and working principle, such as four-point contact ball type, two-way thrust ball type, cross roller type, tapered roller type and so on.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

Thrust roller bearings have the following application characteristics:Withstand large axial load: thrust roller bearings are suitable for mechanical equipment that needs to withstand large axial load, and have high carrying capacity and stability.High-speed rotation: thrust roller bearings can provide good support and smooth operation when rotating at high speed, suitable for fast equipment.Long service life: Because thrust roller bearings can effectively reduce friction and wear, they have a long service life and reliability.Easy installation and maintenance: thrust roller bearings have simpl

Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations that can withstand heavy loads and vibration loads without difficulty. Such bearings can withstand large axial loads in a single direction, but they cannot withstand radial loads, and they have no automatic aligning capability.

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

Thrust roller bearing is an important mechanical part, which is used to support the axial load acting on the rotating parts. Its use is directly related to the stable operation and life of mechanical equipment, so it should be paid attention to. Advantages of thrust roller bearings The processing technology of thrust roller bearings is very precise, and the production accuracy of its inner ring, outer ring and raceway can reach sub-micron level.

We are IKO bearing distributors，we offer a full range of IKO Bearings at very competitive prices, including high quality IKO needle bearing, crossed roller bearings, thrust bearings, roller bearings, ball linear motion rolling guides, roller rolling guides, linear motion rolling guides , precision positioning tables and mechanical parts. Most products can be shipped same or next day.IKO Crossed Roller BearingsIKO Bearing designs and manufactures a wide range of crossed roller bearings that can simultaneously withstand radial, thrust and moment loads.

INA needle roller bearings have excellent quality and performance and are widely used in various industrial fields. It uses needle roller as the rolling body, compared to ball bearings, needle roller bearings have higher load capacity and smaller dimensions, suitable for limited installation space.

These bearings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which requirecompactness, high rigidity and high rotational accuracy. In addition, bearings made of stainless steel and those with inner and outer rings provided with mounting holes are also available on request. Please contact us.Crossed Roller Bearings are compact bearings with their rollers alternately crossed at right angles to each other between inner and outer rings.

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342

Product Description:The thickness specifications of CSB galvanized steel coil are diverse, and the thinner thickness is suitable for some products that are more sensitive to weight and cost and do not need to bear too much pressure, such as internal shielding covers of electronic equipment, small packaging boxes, etc.

Product Description:The 0.5mm thickness of galvanized roof plate is light in weight and can meet the roof bearing requirements of small houses, simple carsheds and other buildings.