Precision Angular Contact Bearings-manufacture,factory,supplier from China

High load capacity: Thanks to the angular contact design, NTN angular contact ball bearings perform well in terms of load capacity and are suitable for high-speed operation and high-power transmission.High precision: NTN angular contact ball bearings are manufactured with high precision, which can ensure their stability, low noise and high performance during operation.High temperature resistance: NTN angular contact ball bearings are usually made of high temperature wear-resistant materials, which can maintain good operating performance in high temperature environments.High speed: NTN angular

A single row angular contact bearing is a common type of bearing, usually consisting of an inner ring, an outer ring, a retainer and a rolling element. It is designed so that the bearing can withstand radial, axial or combined loads when rolling.

Angular contact ball bearings are of a non-separation design, and the shoulders on both sides of the inner and outer rings are not high or low. In order to increase the load capacity of the bearing, the shoulder on one side is machined lower, so that the bearing can fit more steel balls.Single row angular contact ball bearings can only withstand one direction of the axial load, in the radial load, will cause additional axial force, must apply the corresponding reverse load, therefore, this kind of bearings are generally used in pairs.

NTN angular contact ball bearings are suitable for a wide range of industrial equipment and machinery, including but not limited to the following applications:Machine tools and CNC equipment: used to support spindles and other rotating parts to ensure high precision and high-speed stable operation of the equipment.Automobile and motorcycle: widely used in engine, transmission system, suspension system and other components to ensure the smooth running of cars and motorcycles.Construction machinery: such as excavators, cranes, bulldozers, etc., used to withstand the huge load and bumpy vibration

Single row angular contact ball bearings mainly used forundertaking combined load both from radius and axle andalso for pure axle load,rotator speed is high.Material of bearings is choosed on refining bearing steelGCr15 (100Cr6，SUJ2,S2100) and other type of bearingsteel,balls are adopting GCr15 (100Cr6，SUJ2,S2100) orceramic. The bearings are classified as 7000C (15°)70000AC(25°)、7000B (40) in accordance with theircontact angle,other bearings with different contact angular areavailable on request.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)G

NTN angular contact bearing is a commonly used bearing type with excellent load bearing performance and stable rotation accuracy. This kind of bearing is usually composed of inner and outer rails and steel balls and other components, and is suitable for various mechanical equipment and transmission systems. The structural design of NTN angular contact bearings is called the contact Angle, which has the ability of the inner and outer rings to withstand radial and axial loads.

Bearing capacity: NTN angular contact bearings have high bearing capacity and can withstand large radial and axial loads. In the process of use, the axial load of the bearing will cause the contact pressure between the inner and outer rings to increase, so it is necessary to choose the appropriate contact Angle to improve the bearing capacity.Rotation accuracy: NTN angular contact bearings have high rotation accuracy, which can ensure that the mechanical equipment has stable rotation performance during operation.

BE=Single Row Angular Contact Ball Bearing With A 40° Contact Angle And Optimized Internal Design. CB=Bearing For Universal Matching. Two Bearings Arranged Back-To-Back Or Face-To-Face Will Have A Normal Axial Internal Clearance Before Mounting. M=Machined Window-Type Brass Cage, Ball Centered, Different Designs Are Identified By A Figure, e.g.

Advantage of 7020C BearingWhen using the bearing, pay attention to make the raceway on one side without ball loading notch bear the main load.The locking port of this kind of bearing is on the outer ring.Generally, the inner and outer rings cannot be separated, and can bear the combined radial and axial load and the axial load in one direction.The ability to bear axial load is determined by the contact angle.The larger the contact angle, the higher the ability to bear axial load.Angular contact ball bearings are mainly divided into single row angular contact ball bearings and double row angula

Retentors, usually made of steel or synthetic materials, are used to hold rolling elements in position, ensuring that they maintain the correct clearance and position relationship with each other during use.Single-row angular contact bearings are suitable for all kinds of rotating machinery, such as automobile wheels, motors, fans, etc., which can withstand high-speed operation and large loads.When installing, it is necessary to pay attention to the cleaning and lubrication of the bearing to ensure its performance and life.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter

Angular contact thrust ball bearings consist of an inner, outer ring, cage, steel ball and groove, and an inner/outer ring with a spherical surface, which can withstand unidirectional and bidirectional axial loads and slight radial loads.

There are several types of 7000C (∝=15°), 7000AC (∝=25°) and 7000B(∝=40°). The lock of the bearing is on the outer ring, generally the inner and outer rings can not be separated, and can withstand the combined radial and axial load as well as the axial load in one direction. The ability to bear axial load is determined by the contact Angle, and the contact Angle is large, the ability to bear axial load is high.

Mainly bear a large unidirectional axial load, the greater the contact Angle, the greater the load bearing capacity. The cage material is steel plate, brass or engineering plastic, and the forming method is stamping or turning, depending on the bearing form or use conditions.

Product Description:The aluminum sheet is 0.5 inches thick, which is a relatively thick specification among many aluminum sheet products, and has a strong structural load capacity.

Stainless steel band seat bearings are applied by stainless steel outer spherical bearings combined with stainless steel bearing seats.

Flange linear bearing is a common mechanical component, and its role is very important. Its main function is to support and guide two parts in relative motion, so that they can move smoothly with each other. At the same time, it can also withstand the load and torque from these moving parts to ensure the normal operation of the mechanical system.First of all, flanged linear bearings play a supporting role in mechanical equipment. It can withstand gravity and other loads perpendicular to the axis to ensure the stability and reliability of the parts to be supported.

In general, INA needle roller bearings have the advantages of high load carrying capacity, high-speed operation, low friction, lightweight and compact, and are widely used in industrial automation, machine tool equipment, automotive transmission systems and other fields.

Ball bearing with eccentric locking collar is  outer diameter in spherical surface,internal construction is the same as deep groove ball bearings of 6200 6300 series.they both can sustain radial and axial loads.We can supply full series of UC200,UC300,SA200,SB200,UEL200,UK200,SER200,CS200,UC300 series bearings.Such bearings are often used in severe operating conditions where they are exposed to dirts,moisture and high temperature.thus,insert ball bearing are usually with grease groove and oil hole on outer ring,at suitable time,we need to replace fresh grease to secure full performance an

Product Description:Used for indoor ceiling, wall decoration board, etc. Its light weight is easy to install, and the metal texture creates a modern, simple atmosphere in the interior space. It can also be made into a variety of decorative lines, such as top corner line, waist line, etc., to increase the layer of indoor space.

Product Description:SGCC Galvanized Steel Coils are the epitome of strength and corrosion resistance, ideal for construction, automotive, and heavy machinery applications. These coils, characterized by their galvanized coating adhesion and uniform galvanized coating thickness, offer superior durability in harsh environments. With a focus on dimensional accuracy and surface finish, our coils are tailored for precision fabrication in various industrial settings.

These bearings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which requirecompactness, high rigidity and high rotational accuracy. In addition, bearings made of stainless steel and those with inner and outer rings provided with mounting holes are also available on request. Please contact us.Crossed Roller Bearings are compact bearings with their rollers alternately crossed at right angles to each other between inner and outer rings.

Engineering Machinery Bearing have a large carrying capacity and are suitable for supporting structures with limited installation dimensions.The surface of the journal is hardened as the rolling surface, and the bearing is fitted into the seat hole with a press fit, and there is no need for it to be axially positioned.The bearing should be injected with an appropriate amount of grease before installation.Usually, no relubrication is required after assembly (BK type bearings are used in the support of the journal without the protruding end, the end face is closed for sealing, and can withstand

Product Description:The 2024-T3 Aluminum Pipe is a heat-treatable alloy known for its high strength, excellent workability, and moderate corrosion resistance.

Product Description:The 2024 Aluminum Pipe represents a new era in aluminum tubing, designed to meet the evolving demands of the construction, automotive, aerospace, and industrial sectors.