Pillar Bearing-manufacture,factory,supplier from China

This type of bearing is widely used in industrial automatic robots, working machinery and medical facilities, where high rigidity, tightness and high speed are required to ensure accuracy.

Trucks are very common tools in the transportation industry, carrying important goods and supplies. Truck bearing is one of its key components, it plays an important role in the vehicle transmission system support and operation. Its quality and running state directly affect the safety and stability of the vehicle.

The sliding bearing seat is composed of an upper cover, a base, a split bearing bushing (aluminum bronze) and mounting bolts, which mainly bear radial load. Easy to use, no need to install bearings. The load-free part of the inner surface of the bearing bush is provided with an oil groove, and the lubricating oil flows into the gap through the oil inlet hole and the post groove.

The insulated bearing adopts a special spraying process to spray high-quality coating on the outer surface of the bearing. The coating has strong adhesion to the substrate and good insulation performance, which can avoid the electric corrosion of the bearing by the induced current, prevent the damage of the current to the grease, the rolling element and the raceway, and improve the service life of the bearing. The process is constantly improving. In insulated bearings, the outer ring or inner ring surface has a layer of 100μm thick coating, which can withstand voltages up to 1000V DC.

Construction machinery bearings are widely used in various products. The following are some common construction machinery products and their bearing applications:Excavators: Excavators are heavy construction machinery used to excavate earth, stone or other materials, which cover a variety of working conditions and load requirements. Roller bearings or plain bearings that work at high loads and high speeds are usually used on excavators.Bulldozers: Bulldozers are used to bulldoze land, fill earth or push other materials, and need to withstand a large pushing force.

The fourth era hub bearing unit is to make the steady pace commonplace joint and bearing into a whole, which solves the defect of growing the dimension of the hub due to the built-in shape of the hub and the consistent pace common joint in the prior art. The improvement of the fourth technology hub bearing unit has been successful, and it is believed that it will be broadly used in a variety of kinds of cars in the close to future.

Miniature Flanged Ball Bearing are simple structure and easy to use, are the most widely application bearing, mainly used to support radial load.  This kind of bearings with small friction coefficient, low noise, high speed limit, but is not able to bear impact strike, not suitable for a heavy load.  According to the user's requirements, we can provide high precision (P6 ,P5), all kinds of clearance and vibration noise level (Z1 and Z2 or V1, V2) bearing.The flanged bearing enables the bearings to be axially located in the housing, such an arrangement is very simple in design and

The range of four-row tapered roller bearings is wide, including not only the traditional design with an intermediate ring between the outer ring and/or the inner ring, but also the modification of the four-row tapered roller bearings with an integrated middle ring and the bearing ring.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.2377000900

Product Description:Corrugated galvanized metal plate has a unique corrugated structure, the common corrugated shapes include V, U, trapezoid and so on.

Product Description:12-foot galvanized roofing panels have unique advantages in agricultural applications due to their longer dimensions.

Since a bearing can choose different bearing seats, and a bearing seat can choose different types of bearings at the same time, there are many varieties of bearing seats. Bearing seat is included, many large foreign bearing companies also have their own bearing seat type record. However, the same bearing housing model is not marked exactly the same in different company samples.

Product Description:The thickness specifications of CSB galvanized steel coil are diverse, and the thinner thickness is suitable for some products that are more sensitive to weight and cost and do not need to bear too much pressure, such as internal shielding covers of electronic equipment, small packaging boxes, etc.

Iko is a well-known company specializing in the production of various types of bearing products, and its tapered roller bearings are one of its product series. Tapered roller bearing is a common type of bearing, mainly used in mechanical transmission fields, such as automotive, aerospace, engineering machinery and other fields.Iko tapered roller bearings have the following characteristics: First, the structural design is reasonable, mainly composed of inner ring, outer ring, roller and cage.

NTN tapered roller bearings are mainly used to bear radial and axial combined loads mainly based on radial loads, with high stiffness and rotation accuracy, and have large bearing capacity and low limit speed compared with angular contact ball bearings. Its carrying capacity depends on the Angle of the raceway of the outer ring, and the greater the Angle, the greater the carrying capacity.

The popular riding machine for a stud kind cam follower is a slot, for use with a flat head screwdriver. However, hex sockets are accessible for greater torquing ability, which is specifically beneficial for eccentric cam followers and these used in blind holes.

Rotary bearing is an important mechanical component, which is widely used in various industrial equipment and mechanical devices. It bears the radial load, axial load and moment load under the rotating motion, and plays the role of support and rotation. The following will introduce the structure, working principle, application field and maintenance of the rotary support bearing in detail.Rotary support bearings are usually composed of an inner ring, an outer ring, a rolling element (ball, roller, etc.) and a cage.

Agricultural engineering involves a wide range of machinery, equipment and tools, including tillers, tractors, rake machines, balers and high-power harvesting machinery such as green feed harvesters and combine harvesters. A variety of different mechanical equipment, also need to face the harsh working environment. The dusty conditions in summer have very high requirements for bearing seals. In addition, farming machinery bearings are usually integrated with flanged housings to simplify assembly.

Product Description:Q235 carbon steel is one of the most commonly used materials in building structures. It can be used to make main load-bearing structural components such as beams and columns of buildings. Its strength can withstand the building's own weight and external loads, such as wind and earthquake forces.

Cross roller bearing is a special kind of rolling bearing, which is widely used in mechanical field. It is designed to meet large size equipment that needs to operate under the requirements of high load capacity, high rigidity and high rotational accuracy. The cross roller bearing is composed of inner and outer rings, rollers, sealing rings and cages, and its structural advantages are that it can withstand both radial and axial loads, with high torque rigidity and running accuracy. The following will introduce the characteristics and applications of cross roller bearings in detail.

In order to ensure the performance and service life of rotary support bearings, it is necessary to pay attention to the following points: correct selection of suitable bearing models and specifications, reasonable design and arrangement of bearing bearings and lubrication systems, regular inspection and maintenance of bearings, timely replacement of severely worn parts, to avoid overload and overspeed operation, to prevent dust and dirt intrusion into the bearing interior.

Product Description:In automation equipment, such as the shell of the robot, the panel of the industrial automation control cabinet, etc., the application of 3003 aluminum alloy coil can improve the beauty and durability of the equipment, while reducing the overall weight of the equipment, and facilitate the installation and movement of the equipment.Specifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021TemperF, O, HMOQ5T for customized, 2T f

Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance. This kind of bearing has the advantages of small friction coefficient, high limit speed, simple structure, low manufacturing cost and easy to achieve high manufacturing accuracy.Deep groove ball bearings mainly include the following common types:1. Open deep groove ball bearing2. Deep groove ball bearings with a stop groove in the outer ring3. Deep groove ball bearing with dust cover4.

A double-row tapered roller bearing is a common bearing type that consists of two tapered rollers mounted on an inner ring and an outer ring. It can withstand large radial and axial loads and is able to maintain high accuracy and stiffness while rotating at high speeds.Double row tapered roller bearings are designed so that the inner and outer rings can be adjusted separately to achieve axial and radial preloading.

NSK automotive hub bearing is a key component used to support the rotation of automotive wheels. It uses high-quality bearing steel materials and advanced manufacturing processes to ensure the durability and performance stability of the bearing. NSK automotive hub bearings are usually composed of inner and outer rings, bearing balls (rollers), cages, sealing rings, etc. They can withstand the weight of the vehicle, reduce friction, improve rotation efficiency, and resist vibration and impact forces to ensure safety and stability when the vehicle is running.