low temperature aluminium brazing rods-manufacture,factory,supplier from China

Ceramic materials have excellent wear resistance, corrosion resistance, high temperature resistance, low temperature resistance, high hardness, high strength, low expansion coefficient, electrical insulation, no magnetic conductivity and other excellent characteristics.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)706C–6176————0.006707C360177196————0.006708C360188227————0.014709C360199247————0.016723C360233104––––0.002724C360244135————0.014725C360255165————0.0047726C360266

Construction machinery bearings have the following characteristics and scope of application:High strength and wear resistance: Construction machinery bearings usually need to withstand high speed and high load, and work in harsh environments, so they need to have high strength and wear resistance.High temperature resistance: Construction machinery bearings usually work in high temperature environments, so they need to have good high temperature resistance to ensure that bearings can still operate normally at high temperatures.High rotation accuracy: Construction machinery bearings require high

This bearing adopts ceramic rolling element (ball or roller) made of Si3N4 material; It has excellent insulation performance, its capacitance is basically 40pf, and the insulation performance is better than that of coated bearings. At high temperature, the DC impedance can also reach the range of G ohms, and has good insulation performance. Ceramic rolling element has excellent wear resistance and low lubrication requirement. Especially suitable for high-speed, low friction, low temperature operation; It works well under dry friction conditions.

(1),High-speed bearing: has the advantages of cold resistance, low mechanical elasticity, high pressure resistance, poor thermal conductivity, light weight, small friction coefficient, etc., can be used in 12000 RPM - 75,000 RPM high-speed spindle and other high-precision equipment;(2), High temperature bearing: the material itself has a high temperature resistance of 1200 ° C, and self-lubrication, the use of temperature between 100 ° C -800 ° C does not produce expansion caused by temperature difference.

High temperature resistant bearing: The material itself has resistance to high temperature 1200 ℃, and good self-lubrication, tem- perature between 100℃ to 800℃ should not produce temperature difference caused by the expansion.

High load capacity: Thanks to the angular contact design, NTN angular contact ball bearings perform well in terms of load capacity and are suitable for high-speed operation and high-power transmission.High precision: NTN angular contact ball bearings are manufactured with high precision, which can ensure their stability, low noise and high performance during operation.High temperature resistance: NTN angular contact ball bearings are usually made of high temperature wear-resistant materials, which can maintain good operating performance in high temperature environments.High speed: NTN angular

Product Description:6063 Aluminum rods are used to make electronic equipment housing frames, radiators and other components.

Product Description:1060 aluminum rods are used in automobile body structural parts, engine parts, radiators, air conditioning system components, body decoration strips and so on.

Product Description:Mild steel plates have a lower carbon content, usually no more than 0.25%. The lower carbon content makes the steel have good toughness, ductility and weldability. Used in the manufacture of home appliances, such as refrigerators, washing machines, air conditioners, etc.

Flange slide bearing has the features of Low friction coefficients and long usage spans, High temperature, self-lubricated, anti-corrosion. Using feature: Linear bearings are used widely in electronic equipment, pull tester and digital three-dimensional coordinate measuring device.  Such as precision equipment, as well as multi-axis machine tools, press tool, grinder automatic gas cutting machine, printer, card sorting machine, food packaging machine and other industrial machinery sliding components...

Features: Railway bearings have the characteristics of high bearing capacity, wear resistance, impact resistance, high temperature resistance, long life and so on.

Product Description:As a raw material for manufacturing shaft, rod, bracket and other mechanical parts. The mechanical properties of 6005 aluminum rods, including strength, hardness and toughness, can meet most machining requirements.

Product Description:In some high-performance automotive components, such as suspension system components for high-performance sports cars or off-road vehicles, chassis reinforcement, etc., 5456 aluminum rods can be used in manufacturing.

Product Description:Hot-rolled carbon steel coils are made by rolling billets at high temperatures (usually heated to around 1000-1250 °C). Widely used in the manufacture of various mechanical parts, such as shafts, gears, connecting rods and so on.

Railway shaft double row tapered roller bearings have the following characteristics:High load bearing capacity: Double row tapered roller bearings are designed with two rows of rollers, so they can withstand large radial and axial loads.High temperature resistance: suitable for high-speed operation and high temperature environment, with good heat resistance.Strong aligning ability: can maintain good working performance when bearing installation is not accurate or axial displacement.Easy assembly and disassembly: double row tapered roller bearing structure is relatively simple, easy disassembly

As a kind of high-precision, high-strength, high-speed parts, automobile bearings have an absolute linking role, especially in the automobile chassis, engine, gearbox, brake disc, suspension, etc. There are a lot of bearings, so the life expectancy And quality is also a topic of concern to most people.After all, driving safety is more than everything. As a mainstream trend now, new energy vehicles are naturally very concerned about lightweight bearings.Bearings of new technology have also put forward new standards for high temperature resistance, high speed and light weight.

Zirconia ceramic bearingAll ceramic bearings have the characteristics of anti magnetoelec.tric insulation, wear and corrosion resistance, oil-free self lubrica-tion, high temperature and cold resistance. They can be used in ex-tremely harsh environments and special working conditions. Theferrule and rolling element are made of zirconia (ZrO2) ceramic ma-terial, and the retainer is made of polytetrafluoroethylene (PTFE) asthe standard configuration.Generally, glass fiber reinforced nylon66(grpa66-25),special engineering plastics (PEEK, Pl), stainlesssteel(AlSl SUS316,SUS304),brass (Cu), etc.

Product Description:PVDF steel coil can withstand the test of many years of ultraviolet radiation, drastic temperature changes, wind and rain erosion and other natural factors. When used as roofing materials, it provides excellent water resistance, sun protection and corrosion resistance.

With high temperature resistance, cold resistance, wear resistance, corrosion resistance, magnetic electrical insulation resistance, oill lubrication, high speed, etc.properties.Ceramic bearing is a hi-tech product using new materials that can be used in extren onments and special condition, and can be widely used in aviation, aerospace, shipbuilding, petroleum, chemical industry, autome tronics, metallurgy, electric power, textile, medical equipment, pumps, scientific research and national defense military and other fields. NameModelTitleFAG 3205 Bearings3205Original Fag Made In Germany Angul

Use of bearing housing cooling system. Bearing seat cooling water in the correct use of the case not only extend the service life of the bearing seat, but also improve production efficiency. The material of the bearing housing is generally made of special bearing housing steel through various treatments, and the best bearing housing steel also has the limit of their use, such as temperature.

High quality: UBC bearings are made of high quality materials and have undergone strict quality control and testing to ensure reliable product quality.High precision: UBC bearings use advanced production technology and precision machining technology, with precise size and high accuracy, to ensure stable performance.Strong durability: UBC bearings have excellent wear resistance and corrosion resistance, and can operate stably in harsh environments for a long time.Low noise: UBC bearing has been carefully designed and optimized, with low noise and low vibration characteristics, which can reduce

Product Description:PPGI Steel Coil is a pre-painted galvanized steel product known for its corrosion resistance and vibrant color options. It offers a cost-effective solution for applications requiring both strength and aesthetic appeal. With a wide range of coating types available, it is ideal for construction, architectural facades, and appliance manufacturing.

The structure of Koyo tapered roller bearings mainly includes an outer ring, an inner ring, a rolling body (roller) and a cage. The rolling element is located between the inner ring and the outer ring and is kept in the specified axial position by the cage. The contact Angle between the inner ring and the outer ring is generally between 10° and 30°, and different contact angles will affect the bearing capacity and speed limit.

The sliding bearing seat is composed of an upper cover, a base, a split bearing bushing (aluminum bronze) and mounting bolts, which mainly bear radial load. Easy to use, no need to install bearings. The load-free part of the inner surface of the bearing bush is provided with an oil groove, and the lubricating oil flows into the gap through the oil inlet hole and the post groove.