low carbon steel sheet-manufacture,factory,supplier from China

Product Description:DX51D galvanized steel sheet is a commonly used low carbon steel material, easy to carry out a variety of cold processing operations, such as cold rolling, cold bending, stamping and so on.

Product Description:With its hardness between 440-480HBW, NM480 carbon metal plate can efficaciously withstand friction and put on in working environments with greater extreme wear, such as ore processing, constructing substances transportation and different scenarios, appreciably extending the carrier existence of gear components.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A

Product Description:Because of its strength and good plasticity, hot rolled low carbon steel coil can withstand various loads in building structures, and is widely used in the construction industry to make various building structural parts, such as steel beams, steel columns, roof trusses and so on.

Product Description:The quarter-inch galvanized steel plate is based on high-quality steel, usually low or medium carbon steel.

Product Description:There are additionally sure purposes in agricultural equipment (such as slicing components for harvesters), forestry equipment (such as scrapers for wooden conveyors) and different fields, which are used to manufacture components that require put on resistance and sure strength.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A633, JIS G3101-2004, ASTM A678 ASTM A58

Product Description:Q235GJ metal groove is basically composed of iron (Fe), however additionally carries carbon (C), silicon (Si), manganese (Mn) and different simple alloying elements. The highly low carbon content material helps to make certain the durability of the steel.

Product Description:Because of its electricity and true plasticity, warm rolled low carbon metal coil can face up to quite a number masses in constructing structures, and is extensively used in the building enterprise to make a range of constructing structural parts, such as metal beams, metal columns, roof trusses and so on.

Product Description:Q235GJ metal Angle broadly speaking carries iron (Fe) and carbon (C), silicon (Si), manganese (Mn) and different fundamental alloying elements. The carbon content material is commonly low, which helps to make sure the durability of the steel.

Product Description:The DX53D substrate has a lower carbon content than the DC01 substrate used in the DX51D+Z galvanized steel sheet.

Product Description:Q215 carbon steel coil is one of the commonly used materials for manufacturing welded steel pipes. Through crimping, welding and other processes, carbon steel coils can be made into steel pipes of different diameters and wall thicknesses, which are widely used in water supply and drainage, gas transmission, heating pipes and other fields. It can also be used to manufacture various accessories in the pipeline system, such as elbows, tees, quads, etc.

Product Description:In the chemical industry, electric power and other industrial fields, many pipes used to transport various industrial media are also made of carbon steel rolls.

Product Description:Cold-rolled carbon steel coil is further processed by hot-rolled carbon steel coil as raw material. It is widely used in household appliances, such as refrigerators, washing machines, air conditioners, etc.

Product Description:NM800 metal plate is a sort of tempered wear-resistant metal plate, E represents the influence temperature of -40 °C, in the low temperature surroundings can nevertheless preserve a excessive influence toughness, which makes the metal plate in bloodless areas or low temperature working stipulations in the tools application, will now not be embrittlement due to low temperature, so as to make sure the protected operation of equi

Product Description:NM4500 carbon metal plate in cranes, excavators, loaders and different equipment, can be used as wear-resistant lining plate, bucket plate and different components, improve the put on resistance and provider existence of equipment, minimize protection costs.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A633, JIS G3101-2004, ASTM A678 ASTM A588, ASTM A242,etcMaterialA36,SS400,A283  

Product Description:NM360 Carbon Steel Plate with good toughness, can withstand a certain impact and dynamic load, will not easily brittle fracture. Widely used in building structure frame, such as beams, columns and so on.

Product Description:3004 aluminum coil is extensively used in the manufacture of quite a number liquid containers, such as beverage cans, gas tanks, gas or lubricating oil pipes, etc., the use of its properly corrosion resistance and processing properties, can make certain the sealing and provider lifestyles of the container.Specifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8

Product Description:In the production of warehouse shelves, Q3905GJ channel steel is a commonly used material.

Product Description:Q345FTF Steel Plate is made from carefully selected materials, providing a yield strength of 345MPa. This makes it well - equipped to handle a variety of loads in construction projects.The “FTF” in its name indicates unique features. It may offer enhanced fatigue resistance, making it perfect for structures enduring repeated stress, such as bridges under constant traffic or machinery with cyclic operation.

Product Description:Aluminized steel coil has good processability. It can carry out stamping, bending, cutting and other mechanical processing operations. During the stamping process, the aluminum plating layer can maintain good integrity and will not flake off easily.

Product Description:Q420(A/B/C/D/E) Steel Plate, made from prime materials, exhibits a robust yield strength of 420MPa. It combines high strength with good formability and weldability, making it an ideal fit for complex and demanding construction projects. Whether it's for constructing towering skyscrapers, large - scale industrial facilities, or long - span bridges, this steel plate delivers reliable performance.Our production process incorporates strict quality control at every step, ensuring that each Q420(A/B/C/D/E) Steel Plate adheres to the highest industry standards.

Product Description:ST12 Galvanized Sheet, known for its enhanced strength and corrosion resistance, is an industry-standard material designed for durability and reliability in a wide range of applications, including automotive, construction, and manufacturing.Product Manufacturing ProcessChemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → drying → quality inspection → packaging and salesChemical CompositionStandardGradeCSi

Product Description:Our 1mm Galvanized Steel Coils are produced with meticulous precision. The robust, top - notch zinc coating provides unparalleled corrosion resistance, making them an excellent choice for the most demanding and corrosive settings. These coils are perfectly suited for applications such as large - scale infrastructure projects, massive industrial containers, and heavy - duty construction machinery. The 1mm thickness endows the coils with extraordinary strength and unwavering rigidity, capable of withstanding substantial stress.

Product Description:Because 2219 aluminum plate has good welding performance and high strength, it can withstand high pressure and various mechanical loads during rocket launch, so it is often used to manufacture rocket fuel storage tank to ensure the safe storage and supply of fuel.Space shuttle structural parts: In the fuselage structure of the space shuttle, such as the leading edge of the wing, fuselage frame, etc., 2219Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T5

Product Description:The good seawater corrosion resistance of 5A03 aluminum plate makes it very suitable for the manufacture of hull shell, deck, bulkhead and other structural parts, which can maintain stable performance in long-term contact with seawater environment and extend the service life of the hull.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollAluminum Grade1000 SeriesIndustr