hinged plates-manufacture,factory,supplier from China

Product Description:NM400 and NM500 are wear-resistant steel plates, mainly used for occasions requiring high wear resistance.

Product Description:ASTM A36 carbon steel plates are used in the manufacture of mechanical parts such as bases, brackets, etc.

Product Description:5M52 5086 aluminum plates can be used to make sunshades, awnings and other facilities in buildings.

Product Description:SS400 carbon steel can be used for some non-critical structural components of the car body, such as some reinforcement plates and brackets inside the body.

Product Description:High carbon steel plates have a higher carbon content, usually between 0.60%-1.50%. Widely used in the manufacture of various cutting tools, such as cutting tools, saw blades, etc.

Product Description:Mild steel plates have a lower carbon content, usually no more than 0.25%. The lower carbon content makes the steel have good toughness, ductility and weldability. Used in the manufacture of home appliances, such as refrigerators, washing machines, air conditioners, etc.

In railway applications, bearings need to comply with several customer requirements. These include the need for reliability, extended maintenance intervals, space-saving design capabilities and more.We offer solutions for a wide range of wheelset designs for all kinds of railway rolling stock.

In order to ensure the normal operation of NACHl's self-aligning roller bearings and extend their service life, proper installation and maintenance are required:When installing, pay attention to the alignment of bearings and axial centripetal to avoid bearing damage caused by tilt and excessive load.Regularly check the lubrication status of bearings, maintain proper lubrication grease, ensure normal lubrication of bearings, reduce friction and wear.Regularly clean the outer surface of the bearing and the surrounding environment to avoid dust and impurities entering the bearing interior, af

Product Description:Aluminized steel coil has good processability. It can carry out stamping, bending, cutting and other mechanical processing operations. During the stamping process, the aluminum plating layer can maintain good integrity and will not flake off easily.

The outer diameter (OD) of the cam follower (stud or yoke) can be the standard cylindrical shape or be crowned. Crowned cam followers are used to keep the load evenly distributed if it deflects or if there is any misalignment between the follower and the followed surface. They are also used in turntable type applications to reduce skidding. Crowned followers can compensate for up to 0.5° of misalignment, while a cylindrical OD can only tolerate 0.06°. The only disadvantage is that they cannot bear as much load because of higher stresses.

Product Description:S320GD+Z Galvanized Steel Coils are engineered for superior strength and corrosion resistance. These coils boast a robust zinc coating that provides excellent protection against rust and atmospheric corrosion, making them suitable for a variety of construction and industrial applications where durability is key.

Product Description:PPGI Steel Coil is a pre-painted galvanized steel product known for its corrosion resistance and vibrant color options. It offers a cost-effective solution for applications requiring both strength and aesthetic appeal. With a wide range of coating types available, it is ideal for construction, architectural facades, and appliance manufacturing.

Product Description:S280GD+Z galvanized steel plate has small zinc flowers, polished zinc flowers, zero zinc flowers, zinc iron alloy and other surface structures to choose from, has good welding performance, can be connected by a variety of welding methods, welding joint strength is high, good sealing, can meet the assembly requirements of different structural parts, in the building steel structure, machinery manufacturing and other fields widely used.Full cold galvanizing process:Chemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing

Linear bearing is a linear motion system used for linear stroke and cylindrical shaft.

Product Description:Corrugated galvanized iron sheet has a unique corrugated structure, the common corrugated shapes are V-shaped, U-shaped and so on. It can be widely used in outdoor building structures, such as roofs, external walls, fences, etc., extending the service life of buildings and reducing maintenance costs.

Forklift Mast Roller Bearing Precautions1, To keep the forklift bearing its surroundings clean Even if the the invisible smile dust into the forklift bearings will increase bearing wear, vibration and noise.2, Using the installation to be carefully Not allow powerful punch forklift bearing, does not allow a direct hit with a hammer, and not allowed to pass through the rolling pressure.3, The use of appropriate, accurate installation tools To make use of a special tool, and tried to avoid using something like cloth and short fiber.4,To prevent the corrosion of forklift bearings Handle forklift

Product Description:3mm galvanized steel sheet with thickness accuracy of 3mm. This thickness has both strength and lightness, and is suitable for places where weight is limited and structural strength is required, such as light industrial equipment enclosures and interior decorative metal components.

As a kind of high-quality and reliable auto parts, Koyo automotive hub bearings have superior technical performance and good market reputation. Whether in the automotive manufacturing process or in the after-sales maintenance link, the choice of Koyo bearings can provide customers with reliable support and protection, is an indispensable part of the automotive industry.

The structure of Koyo tapered roller bearings mainly includes an outer ring, an inner ring, a rolling body (roller) and a cage. The rolling element is located between the inner ring and the outer ring and is kept in the specified axial position by the cage. The contact Angle between the inner ring and the outer ring is generally between 10° and 30°, and different contact angles will affect the bearing capacity and speed limit.

Product Description:The 6063 Aluminum Pipe is a medium-strength alloy with excellent extrudability, corrosion resistance, and surface finish.

The single-row four-point contact ball slewing bearing has the characteristics of compact structure and light weight, which makes it widely used in construction machinery. Because the steel ball and the circular raceway contact at four points, this support can bear axial force, radial force and heeling moment at the same time, with high bearing capacity and stability. Applicable scope includes rotary conveyor, welding operator, small and medium-sized cranes, excavators and other construction machinery, is a multi-functional, efficient slewing support structure.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis, which means that they are designed to accommodate combined loads, i.e. simultaneously supporting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.

Founded in Meguro-ku, Tokyo, THK pioneered the development of linear motion systems in the world with creative ideas and unique technologies. THK linear bearings are now more and more widely used in electronics, food machinery, packaging machinery, medical machinery, printing machinery, textile machinery, machinery, instruments, robots, tool machinery, CNC machine tools, automobiles and other general or special machinery industries.Needle roller CAM guideThe needle roller CAM guide is a compact bearing with a high internal rigidity shaft and a built-in needle roller bearing.

Single row tapered roller bearing is a common rolling bearing, which is composed of an inner ring, an outer ring, a roller and a cage. Its structure is similar to a conical shape, which is why it gets its name.The contact points on the inner and outer rings are conical and suitable for bearing large loads in both radial and axial directions.