galvanised corrugated metal sheets-manufacture,factory,supplier from China

Product Description:Corrugated galvanized metal plate has a unique corrugated structure, the common corrugated shapes include V, U, trapezoid and so on.

Product Description:The surface has a typical checker pattern, which is produced by a special pressing die during the sheet forming process.

Product Description:Usually the use of roll forming process. The galvanized metal plate is progressively pressed into a roof plate form with a positive crest and trough via a sequence of rollers with a precise shape, and the frequent waveforms are corrugated, trapezoid and so on.

Product Description:Corrugated galvanized iron sheet has a unique corrugated structure, the common corrugated shapes are V-shaped, U-shaped and so on. It can be widely used in outdoor building structures, such as roofs, external walls, fences, etc., extending the service life of buildings and reducing maintenance costs.

Product Description:3005 Aluminum plate thickness range is wide, from sheet to thick plate. Thin sheets can be used to manufacture products with thinner thickness requirements, such as barrier layers for food packaging (if they meet food grade standards), shielding layers for electronic devices, etc.

Product Description:The channel metal is in groove structure and has correct bending resistance.

Product Description:Because of its electricity and true plasticity, warm rolled low carbon metal coil can face up to quite a number masses in constructing structures, and is extensively used in the building enterprise to make a range of constructing structural parts, such as metal beams, metal columns, roof trusses and so on.

Product Description:In the shape of industrial plants, such as mild metal kind plants, for the roof truss, purlin and column connection part.

Product Description:Used for indoor ceiling, wall decoration board, etc. Its light weight is easy to install, and the metal texture creates a modern, simple atmosphere in the interior space. It can also be made into a variety of decorative lines, such as top corner line, waist line, etc., to increase the layer of indoor space.

Product Description:Mainly used for constructing buildings with excessive metal overall performance necessities and some massive engineering structural parts, such as:High-rise buildings: Used for key load-bearing elements such as beams and columns in high-rise buildings, which can efficiently raise the weight of constructions and enhance seismic performance.Large-span structure: metal shape components such as large-span stadiums, airports, exhibition centers, etc., can make

Product Description:Widely used in all sorts of industrial plants, such as metal plants, chemical plants, electronics factories and so on.

Product Description:NM4500 carbon metal plate is a form of excessive power exceptional metal plate with great put on resistance, which is commonly used in the manufacture of wear-resistant components and wear-resistant structural parts.

Product Description:Some of the structural components and elements used in automobiles, such as frame, chassis components, etc., supply the imperative power and balance for the automobile.In some areas the place the overall performance necessities for metal are no longer specially high, such as conveyor chains and links, regular pipe supports, etc., Q275B carbon metal rolls are additionally broadly used.Product   Namecarbon steel  coilWall Thickn

Product Description:NM800 metal plate is a sort of tempered wear-resistant metal plate, E represents the influence temperature of -40 °C, in the low temperature surroundings can nevertheless preserve a excessive influence toughness, which makes the metal plate in bloodless areas or low temperature working stipulations in the tools application, will now not be embrittlement due to low temperature, so as to make sure the protected operation of equi

Product Description:In the keel machine of the constructing curtain wall, the Q420GJ channel metal can supply secure aid for the curtain wall panel to make sure the security of the curtain wall underneath the motion of wind load and self-weight.

Product Description:Its Brinell hardness (HBW) is generally between 370-430, the floor hardness is high, the thickness of the put on layer is large, and the put on resistance is dozens of instances that of everyday metal plates in the case of excessive stress wear.

Product Description:3mm galvanized steel sheet with thickness accuracy of 3mm. This thickness has both strength and lightness, and is suitable for places where weight is limited and structural strength is required, such as light industrial equipment enclosures and interior decorative metal components.

Product Description:Q235GJ metal groove is basically composed of iron (Fe), however additionally carries carbon (C), silicon (Si), manganese (Mn) and different simple alloying elements. The highly low carbon content material helps to make certain the durability of the steel.

Product Description:Q235GJ metal Angle broadly speaking carries iron (Fe) and carbon (C), silicon (Si), manganese (Mn) and different fundamental alloying elements. The carbon content material is commonly low, which helps to make sure the durability of the steel.

Product Description:In some easy cloth conveying equipment, such as the body shape of a small belt conveyor, Q235 channel metal can stand up to the weight of the conveyor belt and substances to make certain the regular transmission of materials.Other propertiescountry of origin ChinaWhether alloyNon AlloyDelivery date8-14 daysbrandXINDONGYUmodel5#-40#applicationSupport systemWhether to drill channel steelnoProcessing servicesBending, welding, punching, uncoiling, cuttingstandardAISI、ASTM、BS、DIN、GB、JISsize50*37

Product Description:The 5083 Aluminum Pipe is a high magnesium alloy known for its exceptional performance in extreme environments, particularly in marine applications due to its superior resistance to seawater corrosion and industrial chemicals.

Product Description:Due to the high strength and light weight of 5056 aluminum plate, it can reduce the weight of the aircraft and improve fuel efficiency while ensuring the structural strength of the aircraft, so it is often used in the manufacture of key structural components such as wings, fuselage frames and landing gear of aircraft.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollA

Product Description:The NM700 metal plate can be used for the snatch bucket of the crane, the spreader of the gantry crane, and the scraper of the bulk conveyor, the conveyor belt safety plate and different parts, which can face up to the weight and influence pressure of the goods and minimize wear.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A633, JIS G3101-2004, ASTM A678 ASTM A588, ASTM A242,e

Product Description:According to one-of-a-kind software scenarios, the aluminum trough can be personalized in phrases of size, shape, floor treatment, etc.