Fyh F208-manufacture,factory,supplier from China

We offer a full range of FYH branded products at very competitive prices. FYH produces about 700 types of standard bearings and 300 types of housings.

1: High load capacity and accuracyThe internal structure of the bearing is the same as that of the single row deep groove ball. While bearing a large radial load, it can bear axial loads in both directions.The accuracy of the bearing is the same as that of the general accuracy, and it has high rotation accuracy and good high-speed performance2: reasonable aligning structure and the most suitable cooperationThe bearing assembly has the aligning property through the spherical outer diameter bearing and the bearing seat with the spherical inner hole.

The working principle of the rolling bearing with seat is mainly to rely on the rolling body to roll in the groove of the inner and outer rings, and convert the input rotating force into rolling motion, so as to support and transfer the load. Compared with plain bearings, rolling bearings with seats have less friction and higher transfer efficiency because they reduce rolling friction.

UBC bearings enjoy a high reputation in the international market, and their products are widely used in mechanical engineering, automotive industry, power industry and other fields.UBC bearings have a wide range of product lines, including deep groove ball bearings, tapered roller bearings, cylindrical roller bearings, angular contact ball bearings and other types of bearings. The characteristics of these products include high speed performance, strong wear resistance, long service life and other advantages, and are widely used in various industrial fields.

Agricultural bearings are used in conveyors, lawn mowers, combines, hay balers, planters/grain drills, augers, cotton strippers, and more.  They are designed to stand up to extreme conditions and loads.  There are many different designs available.  Their basic components are inner and outer rings, balls, and retainers.  The inner race can be round, square, or hex, and the outer race can be either cylindrical or spherical.  Most agricultural bearings are sealed on both sides with single, double, or triple lip.New domestic modelsOld domestic modelInner diameter (mm)Outer

Products mainly used in farming machinery include outer spherical ball bearings and housing units, sealed deep groove ball bearings and angular contact ball bearings, tapered roller bearings, hexagonal and square bore bearings, as well as idler and chain drive gear tooth units.The perfect seal design means that the bearing has a significantly longer service life than its peers, even under harsh working conditions. The large capacity of the grease storage space ensures that the sealed bearing does not require any maintenance.

Product Description:Aluminized steel coil has good processability. It can carry out stamping, bending, cutting and other mechanical processing operations. During the stamping process, the aluminum plating layer can maintain good integrity and will not flake off easily.

Conical roller bearing is a common mechanical transmission element, mainly used to carry axial and radial loads and can achieve rotation and swing motion. It is mainly composed of an inner ring, an outer ring, a roller and a cage, with large carrying capacity, low friction, suitable for high-speed rotation and high accuracy requirements, so it is widely used in construction machinery, automotive, aerospace, mining machinery, metallurgical equipment and other fields.

Product Description:By forging, cutting and other processing methods, the steel coil is processed into the shape of the gear, and the performance of the gear can be further improved by heat treatment.

We are an authorized dealer of NACHI bearings. We can provide most of the bearing products in NACHI bearing catalogue. We offer a full line of NACHI products including Ball Bearings, Self-Aligning Bearings, Angular Contact Bearings, Cylindrical Bearings, Needle Roller Bearings and Spherical Bearings at very competitive prices for same day or next day delivery.NACHI Cylindrical Roller BearingsThe structure of cylindrical roller bearings is the simplest of all radial roller bearings, whose inner ring, outer ring and rollers are in line contact, with a large radial load capacity.

Use of bearing housing cooling system. Bearing seat cooling water in the correct use of the case not only extend the service life of the bearing seat, but also improve production efficiency. The material of the bearing housing is generally made of special bearing housing steel through various treatments, and the best bearing housing steel also has the limit of their use, such as temperature.

Tapered curler bearing refers to the radial thrust kind rolling bearing whose rolling physique is a tapered roller. There are small cone angles and giant cone angles. The small cone Angle usually bears the radial and axial mixed hundreds ordinarily primarily based on radial loads, regularly used in double, reverse installation, the internal and outer seat rings can be established respectively, and the radial and axial clearance can be adjusted throughout set up and use.

Strong bearing capacity: Due to the large number of needle roller, needle roller bearings have a high bearing capacity, suitable for bearing large radial and axial loads. (2) Small starting torque: the friction inside the needle roller bearing is small, and the starting torque is small, making the starting speed of the bearing faster. (3) Simple structure: The structure of needle roller bearings is relatively simple, easy to install and maintain, and low cost.

As an important mechanical transmission element, rolling bearing with seat plays a key role in various fields.

The process has been continuously improved, and in insulated bearings, there is a coating 100μm thick on the surface of the outer or inner ring, which can withstand voltages up to 1000 V DC.

»drawn cup needle roller bearings                            »solid needle roller bearings»combined needle roller bearings                             »drawn cup roller clutch»heavy duty needle roller bearings                           »sealed needle bearings»thrust needle roller bearings                           

Features: (1) High strength and wear resistance: wheel bearings are usually made of high-strength alloy steel or stainless steel, with good wear resistance and pressure resistance, can withstand the high load and friction when the vehicle is running; (2) Good sealing: the seals in the hub bearing structure can effectively prevent external dust, water, impurities, etc.

Product Description:SS400 carbon steel can be used for some non-critical structural components of the car body, such as some reinforcement plates and brackets inside the body.

Stamped outer ring needle roller clutch, commonly known as one-way bearing or one-way needle roller bearing,  is a single directional bearing composed of a thin-walled outer ring, cage, spring plate,  and needle roller that is stretched from an alloy sheet. It can be used as a converter, check device,  and overrunning clutch, and is widely used in fitness equipment, cash counting machines, washing machines,  fishing gear, toy cars, and other transmission parts that need to have a reverse stop function.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

Application scenario:Industrial automation equipment: THK linear bearings are widely used in automated assembly lines, robots and other equipment to achieve accurate positioning and movement of parts.CNC machine tools: THK linear bearings play an important role in CNC machine tools, which can ensure the machining accuracy and efficiency of the workpiece.Medical equipment: THK linear bearings are also commonly used in medical equipment, such as imaging instruments, etc., to ensure the high precision and stability of the equipment.Electronic equipment: In semiconductor production equipment, lase

Flange linear bearing is a common mechanical component, and its role is very important. Its main function is to support and guide two parts in relative motion, so that they can move smoothly with each other. At the same time, it can also withstand the load and torque from these moving parts to ensure the normal operation of the mechanical system.First of all, flanged linear bearings play a supporting role in mechanical equipment. It can withstand gravity and other loads perpendicular to the axis to ensure the stability and reliability of the parts to be supported.

Product Description:Manufacture a variety of mechanical structural components, such as machine workbench, robot arms, etc.

Product Description:The 2024 Aluminum Pipe represents a new era in aluminum tubing, designed to meet the evolving demands of the construction, automotive, aerospace, and industrial sectors.