Fyh Bearing Made In-manufacture,factory,supplier from China

We offer a full range of FYH branded products at very competitive prices. FYH produces about 700 types of standard bearings and 300 types of housings.

1: High load capacity and accuracyThe internal structure of the bearing is the same as that of the single row deep groove ball. While bearing a large radial load, it can bear axial loads in both directions.The accuracy of the bearing is the same as that of the general accuracy, and it has high rotation accuracy and good high-speed performance2: reasonable aligning structure and the most suitable cooperationThe bearing assembly has the aligning property through the spherical outer diameter bearing and the bearing seat with the spherical inner hole.

Zirconia ceramic bearingAll ceramic bearings have the characteristics of anti magnetoelec.tric insulation, wear and corrosion resistance, oil-free self lubrica-tion, high temperature and cold resistance. They can be used in ex-tremely harsh environments and special working conditions. Theferrule and rolling element are made of zirconia (ZrO2) ceramic ma-terial, and the retainer is made of polytetrafluoroethylene (PTFE) asthe standard configuration.Generally, glass fiber reinforced nylon66(grpa66-25),special engineering plastics (PEEK, Pl), stainlesssteel(AlSl SUS316,SUS304),brass (Cu), etc.

Insulating materials: insulated bearings are usually made of insulating materials, such as ceramics or special alloys, whose insulation properties can effectively prevent the current from being transmitted through the bearing to other components and play a protective role.Application: insulated bearings are widely used in electrical equipment, motors, generators, frequency converters, wind turbines, electric vehicles and other fields, especially suitable for occasions that need to prevent current conduction.

First, the inner and outer rings of flange bearings are usually made of high-quality steel after heat treatment to improve their hardness and wear resistance. The inner ring is a component mounted on the shaft, and the outer ring is fixed on the seat hole. The two components are connected and supported by a rolling element and a cage.The rolling body is a very important part of the bearing, usually made of steel, by the different shape of the rolling body can be divided into rolling son, needle roller, ball and roller.

CAM bearing is a mechanical device used to drive camshaft, its main role is to achieve effective transmission and support between camshaft and other components in the engine. CAM bearings are usually made of metal materials and are subjected to greater pressure and friction in high-speed engines. The design and quality of CAM bearing directly affect the performance and life of engine.CAM bearings usually include camshaft, shaft sleeve, needle roller, steel ball and other components.

These bearings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which requirecompactness, high rigidity and high rotational accuracy. In addition, bearings made of stainless steel and those with inner and outer rings provided with mounting holes are also available on request. Please contact us.Crossed Roller Bearings are compact bearings with their rollers alternately crossed at right angles to each other between inner and outer rings.

Structure: THK linear bearing is mainly composed of bearing body, ball, cage, guide rail and other parts. The bearing body is usually made of high-strength alloy steel, and the cage is made of high-wear-resistant materials. The ball is to play a role in reducing friction and support.Working principle: The working principle of THK linear bearing is to make the ball slide smoothly on the guide rail through the friction of the bearing body and the guide rail, so as to achieve the linear movement of the workpiece or equipment.

High quality: UBC bearings are made of high quality materials and have undergone strict quality control and testing to ensure reliable product quality.High precision: UBC bearings use advanced production technology and precision machining technology, with precise size and high accuracy, to ensure stable performance.Strong durability: UBC bearings have excellent wear resistance and corrosion resistance, and can operate stably in harsh environments for a long time.Low noise: UBC bearing has been carefully designed and optimized, with low noise and low vibration characteristics, which can reduce

Use of bearing housing cooling system. Bearing seat cooling water in the correct use of the case not only extend the service life of the bearing seat, but also improve production efficiency. The material of the bearing housing is generally made of special bearing housing steel through various treatments, and the best bearing housing steel also has the limit of their use, such as temperature.

A flange bearing is a bearing widely used in industrial machinery, which has a flange (usually circular) to be fixed in the mechanical equipment. The flange bearing consists of an inner ring, an outer ring, a rolling element (such as a steel ball, roller, roller, etc.), a cage and a seal.First of all, the inner ring and the outer ring are the main bearing parts of the flange bearing, they are usually made of high-quality steel, after a good heat treatment process to ensure their hardness and wear resistance.

The inner and outer rings are made of high-quality bearing steel material, with good hardness and wear resistance, and can withstand high-speed rotation and heavy load conditions.The roller adopts cylindrical or conical design, which can effectively share the radial and axial load, reduce rolling friction, and improve the rotation efficiency of the bearing.The cage is made of steel or copper material, with good strength and toughness, which can support the roller stably and extend the service life of the bearing during high-speed operation.The aligning design can automatically adjust the relat

Flanged linear bearings can also withstand large loads and moments. Its internal structure has been precisely designed and made of high-strength materials to maintain stability under high speed and high load operating conditions. Therefore, in heavy machinery equipment and construction machinery, flanged linear bearings are often used to withstand the weight of goods and the inertial force brought by movement to ensure that the mechanical system is always in a safe and stable state.The role of linear bearings mainly includes support, guidance and load bearing.

Inner and outer ring design: The inner and outer rings of the insulated bearing are made of insulating materials or special treatment, so that the current inside the bearing can not be conducted through the inner and outer rings, so as to achieve the effect of electrical insulation.Seal design: The seal design of the insulated bearing is strict, which can effectively prevent the infiltration of external media and maintain the insulation performance and stability of the bearing.

Inner and outer ring design: The internal and outer rings of the insulated bearing are made of insulating substances or different treatment, so that the modern-day interior the bearing can now not be carried out via the internal and outer rings, so as to reap the impact of electrical insulation.Seal design: The seal format of the insulated bearing is strict, which can efficaciously forestall the infiltration of exterior media and preserve the insulati

Retentors, usually made of steel or synthetic materials, are used to hold rolling elements in position, ensuring that they maintain the correct clearance and position relationship with each other during use.Single-row angular contact bearings are suitable for all kinds of rotating machinery, such as automobile wheels, motors, fans, etc., which can withstand high-speed operation and large loads.When installing, it is necessary to pay attention to the cleaning and lubrication of the bearing to ensure its performance and life.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter

The function of the cage is to fix the rolling element spacing in a certain position to prevent collision with each other and chaotic arrangement. The shape and material of the cage will affect the service life and operation effect of the bearing, and is usually made of metal or plastic.In addition, the sealing structure of the flange bearing is also very important, which can prevent dust, moisture and other external substances from entering the bearing interior and improve the service life and performance of the bearing.

FAG bearings are widely used.Including bicycles, food and beverage industries, electrical appliances, furniture industries, chemical and electroplating industries, paints and dyes, textile industries, automobiles, motorcycles, pumps, fans, water treatment, pharmaceutical industries and many other industrial applications.We can provide FAG deep groove ball bearings, tapered bearings, etc.If you need FAG bearings, please feel free to contact us.NameModelTitleFAG 3205 Bearings3205Original Fag Made In Germany angular contact ball bearing 3200 3201 3202 3203 3204 3205FAG 3210 Bearings3210

With high temperature resistance, cold resistance, wear resistance, corrosion resistance, magnetic electrical insulation resistance, oill lubrication, high speed, etc.properties.Ceramic bearing is a hi-tech product using new materials that can be used in extren onments and special condition, and can be widely used in aviation, aerospace, shipbuilding, petroleum, chemical industry, autome tronics, metallurgy, electric power, textile, medical equipment, pumps, scientific research and national defense military and other fields. NameModelTitleFAG 3205 Bearings3205Original Fag Made In Germany Angul

Bearing seat is a mechanical part for mounting bearings, which usually has two parts: a seat body fixed on the machine tool and a bearing seat sleeve fixed with the seat body. The role of the bearing seat is to support the bearing and ensure that the bearing can be correctly installed on the shaft of the machine equipment to withstand the load brought by the bearing in the rotating motion.The bearing seat is usually made of a high-strength metal or steel material to ensure that it has sufficient strength and stiffness to support the bearing.

NTN angular contact ball bearings are suitable for a wide range of industrial equipment and machinery, including but not limited to the following applications:Machine tools and CNC equipment: used to support spindles and other rotating parts to ensure high precision and high-speed stable operation of the equipment.Automobile and motorcycle: widely used in engine, transmission system, suspension system and other components to ensure the smooth running of cars and motorcycles.Construction machinery: such as excavators, cranes, bulldozers, etc., used to withstand the huge load and bumpy vibration

The ring and roller of our ceramic bearing adopts full ceramic materials including zirconia (ZrO2), silicon nitride (SisN4), silicon carbide.

Features: (1) High strength and wear resistance: wheel bearings are usually made of high-strength alloy steel or stainless steel, with good wear resistance and pressure resistance, can withstand the high load and friction when the vehicle is running; (2) Good sealing: the seals in the hub bearing structure can effectively prevent external dust, water, impurities, etc.

Product Description:5052 aluminum alloy sheet/sheet is used for some non-critical structural components of the car body, such as the door inner plate, the engine hood inner plate, etc.