Four Row Tapered Roller Bearings-manufacture,factory,supplier from China

The range of four-row tapered roller bearings is wide, including not only the traditional design with an intermediate ring between the outer ring and/or the inner ring, but also the modification of the four-row tapered roller bearings with an integrated middle ring and the bearing ring.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.2377000900

Four row tapered roller bearings are mainly used for work rolls, support rolls, and billet breakers of various plate and strip rolling mills. The clearance of the bearing is changed by adjusting the thickness of the spacer to make it more suitable for the working condition.1. Strong bearing capacity: four row tapered roller bearings can withstand greater loads under the same size, because it is shared by multiple rollers, so it has higher carrying capacity and better distribution performance.2.

Tapered roller bearings are separated bearings, and the inner and outer rings of the bearings are equipped with tapered raceways. This kind of bearing is divided into single row, double row and four row tapered roller bearings and other different structural types according to the number of rows of rollers installed. Single-row tapered roller bearings can withstand radial loads and axial loads in a single direction.

Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction.The type code of tapered roller bearings is 30,000, and tapered roller bearings are separable bearings.

Iko tapered roller bearings are also very convenient in terms of installation and maintenance.

1) Less coefficient of friction, High limiting speed, Large size range, Variations of structure.2) Tapered Roller Bearings are designed such like cup. Cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis.3) Single-row tapered roller bearing is able to carry radial and axial load in one directionssimultaneously because an axial component of produced when this type of bearings loadedradically, two bearings are used together facing one another, or two or more bearings arematched and used.

UBC tapered roller bearing is a kind of rolling bearing with tapered roller, the roller and raceway between the inner ring (cone hub) and the outer ring (cup) intersect at the cone half Angle on the outer surface of the cone, so that the bearing can bear a large load in the radial and axial direction. UBC tapered roller bearings usually include single row, double row and four row structures, which are widely used in automotive, mechanical equipment, aerospace and other fields.

Slewing bearing has four series of toothless, external and internal toothed four-point contact ball bearings, double row angular contact ball bearings cross cylindrical roller bearings, cross tapered roller bearings and three row cylindrical roller composite bearings, of which four-point contact ball bearings have higher static load capacity, cross cylindrical roller has higher dynamic load capacity, The pre-interference of cross-tapered roller bearing can make the bearing have greater support rigidity and rotation accuracy.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

Double-row tapered roller bearings have many advantages in structure and performance, so they are widely used in industrial production.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.237700090000.154302067206E306217.543.250.5600075000.231302077207E35721754.263.5530067000.331302087208E4080186374500063000.422302097209E45851967.883.5450056000.474

Advantage of 30307 Bearing• 302XX, 303XX, 313XX, 320XX, 322XX, 323XX and 329XX series• Double row tapered roller bearing series (details available on request)• Pressed steel and polyamide cages• Standard accuracy P0 and higher accuracy P6.• A variety of inch bearings are also availableTypeA singleSingle row tapered roller bearings can withstand combined radial and axial loads.

A double-row tapered roller bearing is a common bearing type that consists of two tapered rollers mounted on an inner ring and an outer ring. It can withstand large radial and axial loads and is able to maintain high accuracy and stiffness while rotating at high speeds.Double row tapered roller bearings are designed so that the inner and outer rings can be adjusted separately to achieve axial and radial preloading.

Railway shaft double row tapered roller bearings have the following characteristics:High load bearing capacity: Double row tapered roller bearings are designed with two rows of rollers, so they can withstand large radial and axial loads.High temperature resistance: suitable for high-speed operation and high temperature environment, with good heat resistance.Strong aligning ability: can maintain good working performance when bearing installation is not accurate or axial displacement.Easy assembly and disassembly: double row tapered roller bearing structure is relatively simple, easy disassembly

Inch taper/tapered roller bearings belong to separable bearing, as the outer ring, also called cup, is separable and easy for assembly.

As one of the largest taper roller manufacturers in Shandong, China, in addition to the tapered roller bearings introduced above, we can also provide the following tapered roller types.

Double-row tapered roller bearings are usually used in applications that require large loads and high-speed rotation, such as wind turbines, metallurgical equipment, rolling mills and heavy machinery, etc.

NTN tapered roller bearings are mainly used to bear radial and axial combined loads mainly based on radial loads, with high stiffness and rotation accuracy, and have large bearing capacity and low limit speed compared with angular contact ball bearings. Its carrying capacity depends on the Angle of the raceway of the outer ring, and the greater the Angle, the greater the carrying capacity.

The important construction modes of the turntable bearing seat are: four-point contact ball bearing seat, double-row angular contact thrust ball bearing seat, interpenetrating cylindrical roller bearing seat, interpenetrating tapered roller bearing seat, and three-row cylindrical roller with turntable bearing seat.According to whether the gear can be carried and the spread of the gear is divided into: toothless, external or internal gear and other different structures.The four-point contact ball turntable bearing seat has a higher static bearing capacity, the interspersed cylindrical roller be

More than 20 years of industry experienceOur own brandAccept OEM, customization and customer logo 7 / 24-hour telephone serviceReply to your inquiry within 12 hours Professional technical supportGood cost control ability will bring you reasonable price, and the long-term partner of freight forwarder will bring you low freight Provide special discounts and sales area protection for our dealersTypeSingle lineSingle row tapered roller bearings can withstand combined radial and axial loads.

In railway applications, bearings need to comply with several customer requirements. These include the need for reliability, extended maintenance intervals, space-saving design capabilities and more.We offer solutions for a wide range of wheelset designs for all kinds of railway rolling stock.

Features: (1) High strength and wear resistance: wheel bearings are usually made of high-strength alloy steel or stainless steel, with good wear resistance and pressure resistance, can withstand the high load and friction when the vehicle is running; (2) Good sealing: the seals in the hub bearing structure can effectively prevent external dust, water, impurities, etc.

Product Description:NM400 and NM500 are wear-resistant steel plates, mainly used for occasions requiring high wear resistance.

Strong bearing capacity: Due to the large number of needle roller, needle roller bearings have a high bearing capacity, suitable for bearing large radial and axial loads. (2) Small starting torque: the friction inside the needle roller bearing is small, and the starting torque is small, making the starting speed of the bearing faster. (3) Simple structure: The structure of needle roller bearings is relatively simple, easy to install and maintain, and low cost.

Some typical insulating bearing materials include ceramic, graphite and the famous polytetrafluoroethylene (PTFE). Ceramics are widely used in the bearing industry because of their hard diamond, wear-resistant gold and outstanding insulation properties. Graphite is widely used in bearings because of its extremely low friction and high lubrication. PTFE is widely used because of its excellent corrosion resistance and strong insulation. According to actual needs, designers and engineers can also choose other special materials to build insulated bearings.