Four Row Tapered Roller Bearing-manufacture,factory,supplier from China

Four row tapered roller bearings are mainly used for work rolls, support rolls, and billet breakers of various plate and strip rolling mills. The clearance of the bearing is changed by adjusting the thickness of the spacer to make it more suitable for the working condition.1. Strong bearing capacity: four row tapered roller bearings can withstand greater loads under the same size, because it is shared by multiple rollers, so it has higher carrying capacity and better distribution performance.2.

The range of four-row tapered roller bearings is wide, including not only the traditional design with an intermediate ring between the outer ring and/or the inner ring, but also the modification of the four-row tapered roller bearings with an integrated middle ring and the bearing ring.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.2377000900

1) Less coefficient of friction, High limiting speed, Large size range, Variations of structure.2) Tapered Roller Bearings are designed such like cup. Cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis.3) Single-row tapered roller bearing is able to carry radial and axial load in one directionssimultaneously because an axial component of produced when this type of bearings loadedradically, two bearings are used together facing one another, or two or more bearings arematched and used.

Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction.The type code of tapered roller bearings is 30,000, and tapered roller bearings are separable bearings.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

UBC tapered roller bearing is a kind of rolling bearing with tapered roller, the roller and raceway between the inner ring (cone hub) and the outer ring (cup) intersect at the cone half Angle on the outer surface of the cone, so that the bearing can bear a large load in the radial and axial direction. UBC tapered roller bearings usually include single row, double row and four row structures, which are widely used in automotive, mechanical equipment, aerospace and other fields.

Tapered roller bearings are separated bearings, and the inner and outer rings of the bearings are equipped with tapered raceways. This kind of bearing is divided into single row, double row and four row tapered roller bearings and other different structural types according to the number of rows of rollers installed. Single-row tapered roller bearings can withstand radial loads and axial loads in a single direction.

Iko tapered roller bearings are also very convenient in terms of installation and maintenance.

Double-row tapered roller bearings have many advantages in structure and performance, so they are widely used in industrial production.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.237700090000.154302067206E306217.543.250.5600075000.231302077207E35721754.263.5530067000.331302087208E4080186374500063000.422302097209E45851967.883.5450056000.474

Slewing bearing has four series of toothless, external and internal toothed four-point contact ball bearings, double row angular contact ball bearings cross cylindrical roller bearings, cross tapered roller bearings and three row cylindrical roller composite bearings, of which four-point contact ball bearings have higher static load capacity, cross cylindrical roller has higher dynamic load capacity, The pre-interference of cross-tapered roller bearing can make the bearing have greater support rigidity and rotation accuracy.

A double-row tapered roller bearing is a common bearing type that consists of two tapered rollers mounted on an inner ring and an outer ring. It can withstand large radial and axial loads and is able to maintain high accuracy and stiffness while rotating at high speeds.Double row tapered roller bearings are designed so that the inner and outer rings can be adjusted separately to achieve axial and radial preloading.

Advantage of 30307 Bearing• 302XX, 303XX, 313XX, 320XX, 322XX, 323XX and 329XX series• Double row tapered roller bearing series (details available on request)• Pressed steel and polyamide cages• Standard accuracy P0 and higher accuracy P6.• A variety of inch bearings are also availableTypeA singleSingle row tapered roller bearings can withstand combined radial and axial loads.

Single row tapered roller bearing is a common rolling bearing, which is composed of an inner ring, an outer ring, a roller and a cage. Its structure is similar to a conical shape, which is why it gets its name.The contact points on the inner and outer rings are conical and suitable for bearing large loads in both radial and axial directions.

Railway shaft double row tapered roller bearings have the following characteristics:High load bearing capacity: Double row tapered roller bearings are designed with two rows of rollers, so they can withstand large radial and axial loads.High temperature resistance: suitable for high-speed operation and high temperature environment, with good heat resistance.Strong aligning ability: can maintain good working performance when bearing installation is not accurate or axial displacement.Easy assembly and disassembly: double row tapered roller bearing structure is relatively simple, easy disassembly

The important construction modes of the turntable bearing seat are: four-point contact ball bearing seat, double-row angular contact thrust ball bearing seat, interpenetrating cylindrical roller bearing seat, interpenetrating tapered roller bearing seat, and three-row cylindrical roller with turntable bearing seat.According to whether the gear can be carried and the spread of the gear is divided into: toothless, external or internal gear and other different structures.The four-point contact ball turntable bearing seat has a higher static bearing capacity, the interspersed cylindrical roller be

Inch taper/tapered roller bearings belong to separable bearing, as the outer ring, also called cup, is separable and easy for assembly.

More than 20 years of industry experienceOur own brandAccept OEM, customization and customer logo 7 / 24-hour telephone serviceReply to your inquiry within 12 hours Professional technical supportGood cost control ability will bring you reasonable price, and the long-term partner of freight forwarder will bring you low freight Provide special discounts and sales area protection for our dealersTypeSingle lineSingle row tapered roller bearings can withstand combined radial and axial loads.

As one of the largest taper roller manufacturers in Shandong, China, in addition to the tapered roller bearings introduced above, we can also provide the following tapered roller types.

Tapered curler bearing refers to the radial thrust kind rolling bearing whose rolling physique is a tapered roller. There are small cone angles and giant cone angles. The small cone Angle usually bears the radial and axial mixed hundreds ordinarily primarily based on radial loads, regularly used in double, reverse installation, the internal and outer seat rings can be established respectively, and the radial and axial clearance can be adjusted throughout set up and use.

Angular contact ball bearings are of a non-separation design, and the shoulders on both sides of the inner and outer rings are not high or low. In order to increase the load capacity of the bearing, the shoulder on one side is machined lower, so that the bearing can fit more steel balls.Single row angular contact ball bearings can only withstand one direction of the axial load, in the radial load, will cause additional axial force, must apply the corresponding reverse load, therefore, this kind of bearings are generally used in pairs.

Because the bearing ball is in contact with the bearing point, the load is small.

THK was founded in 1971 in Meguro-ku, Tokyo, Japan, and was originally named Toho Seiko Co., Ltd. It was later renamed THK CO.,LTD. "THK" stands for "Toughness", "High Quality" and "Know-how".THK linear bearings are a linear motion system produced at low cost for use with cylindrical shafts with unlimited travel. Because the bearing ball is in point contact with the shaft, the load is small.

Angular contact ball bearing 70000 type, composed of outer ring, inner ring, steel ball, cage.

Product Description:Aluminum plate For some industrial products with high moisture and oxidation requirements, such as precision mechanical parts, electronic products, etc., can be packaged with aluminum plate.