Four Row Cylindrical Roller Bearing-manufacture,factory,supplier from China

Four row tapered roller bearings are mainly used for work rolls, support rolls, and billet breakers of various plate and strip rolling mills. The clearance of the bearing is changed by adjusting the thickness of the spacer to make it more suitable for the working condition.1. Strong bearing capacity: four row tapered roller bearings can withstand greater loads under the same size, because it is shared by multiple rollers, so it has higher carrying capacity and better distribution performance.2.

The range of four-row tapered roller bearings is wide, including not only the traditional design with an intermediate ring between the outer ring and/or the inner ring, but also the modification of the four-row tapered roller bearings with an integrated middle ring and the bearing ring.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.2377000900

Slewing bearing has four series of toothless, external and internal toothed four-point contact ball bearings, double row angular contact ball bearings cross cylindrical roller bearings, cross tapered roller bearings and three row cylindrical roller composite bearings, of which four-point contact ball bearings have higher static load capacity, cross cylindrical roller has higher dynamic load capacity, The pre-interference of cross-tapered roller bearing can make the bearing have greater support rigidity and rotation accuracy.

Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction.The type code of tapered roller bearings is 30,000, and tapered roller bearings are separable bearings.

The important construction modes of the turntable bearing seat are: four-point contact ball bearing seat, double-row angular contact thrust ball bearing seat, interpenetrating cylindrical roller bearing seat, interpenetrating tapered roller bearing seat, and three-row cylindrical roller with turntable bearing seat.According to whether the gear can be carried and the spread of the gear is divided into: toothless, external or internal gear and other different structures.The four-point contact ball turntable bearing seat has a higher static bearing capacity, the interspersed cylindrical roller be

According to whether the ring has a rib or not, NSK cylindrical roller bearings are divided into NU, NJ, NUP, N, NF and other single-row bearings, and NNU, NN double-row bearings. The bearing is a structure with separable inner ring and outer ring. Cylindrical roller bearings with inner or outer rings without rims, the inner and outer rings can be axially moved relative to each other, so they can be used as free-end bearings.

1) Less coefficient of friction, High limiting speed, Large size range, Variations of structure.2) Tapered Roller Bearings are designed such like cup. Cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis.3) Single-row tapered roller bearing is able to carry radial and axial load in one directionssimultaneously because an axial component of produced when this type of bearings loadedradically, two bearings are used together facing one another, or two or more bearings arematched and used.

Iko tapered roller bearings are also very convenient in terms of installation and maintenance.

Some cylindrical roller bearings have no ribs on either theinnere rings canelative to eacese can bfree-end bearingsCylindrical roller bearingouter rings has two ribs aother ringhas one ,are capable of takingxial loaone directiobearingshave high radial rigidity and are used primarily for precisionmachine tools.Types NU , N , NNU , and NN are suitable as free-end bearingsTypes NJ and NF can sustain limited axial loads in one directionTypes NH and NUP can be used as fixed-end bearingsNH-type cylindrical roller bearings consist of the Nj-type cylindricalroller bearings andHu-type Lshaped thrust co

The different types of cylindrical roller bearings are designated based on their structural features and intended applications: N..EM: Cylindrical roller bearing with a standard inner ring without any ribs, suitable for radial loads. NU..EM: Bearing with aremovable inner ring and two integral flanges on the outer ring, designed for high radial loads and accommodates axialdisplacement. NJ..EM: Features a removable inner ring and one integral flange on the outer ring, primarily used for applicationswhere axial displacement is required.

UBC tapered roller bearing is a kind of rolling bearing with tapered roller, the roller and raceway between the inner ring (cone hub) and the outer ring (cup) intersect at the cone half Angle on the outer surface of the cone, so that the bearing can bear a large load in the radial and axial direction. UBC tapered roller bearings usually include single row, double row and four row structures, which are widely used in automotive, mechanical equipment, aerospace and other fields.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

Tapered roller bearings are separated bearings, and the inner and outer rings of the bearings are equipped with tapered raceways. This kind of bearing is divided into single row, double row and four row tapered roller bearings and other different structural types according to the number of rows of rollers installed. Single-row tapered roller bearings can withstand radial loads and axial loads in a single direction.

Single row tapered roller bearing is a common rolling bearing, which is composed of an inner ring, an outer ring, a roller and a cage. Its structure is similar to a conical shape, which is why it gets its name.The contact points on the inner and outer rings are conical and suitable for bearing large loads in both radial and axial directions.

The design of the roller and raceway contact line of all thrust cylindrical roller bearings is optimized to avoid the generation of edge effects.

In rolling bearings, the bearing ring is separated by a rolling unit (rolling element), and in slide guidance systems, the movable part slides on a static guide rail or shaft. Depending on the type of track system, the sliding layer is on movable or rigid components. The lubricating oil is embedded in the sliding layer to achieve lubrication. INA linear plain bearing is a linear positioning bearing with infinite stroke length.

Product Description:5052 aluminum alloy sheet/sheet is used for some non-critical structural components of the car body, such as the door inner plate, the engine hood inner plate, etc.

Tapered roller bearings are suitable for bearing radial loads, unidirectional axial loads and radial and axial combined loads. The axial load capacity of tapered roller bearings depends on the contact Angle α, that is, the Angle of the outer ring raceway, the greater the contact Angle α, the greater the axial load capacity. Generally tapered roller bearings do not allow Angle errors, but the surface of the roller and raceway can be specially designed to allow 2'~4' Angle errors.

Product Description:Q195 carbon steel coil due to its good plasticity, can be used to manufacture light steel keel, can be easily processed into various shapes of keel, and can withstand a certain building load.

Product Description:Because the 1050 aluminum rod has good corrosion resistance, especially in some weakly acidic and weakly alkaline food processing environments, such as some non-critical parts of dairy processing equipment (such as pipe brackets, shells of mixing equipment, etc.), and conveying parts of beverage production equipment.

Product Description:The 5083 Aluminum Pipe is a high magnesium alloy known for its exceptional performance in extreme environments, particularly in marine applications due to its superior resistance to seawater corrosion and industrial chemicals.

Product Description:Q195 carbon steel is mainly composed of iron (Fe) and a small amount of carbon (C), and the elongation is high, up to about 33% (standard distance 50mm).

Product Description:SS400 carbon steel can be used for some non-critical structural components of the car body, such as some reinforcement plates and brackets inside the body.

Agricultural bearings refer to the bearing products used in agricultural machinery and equipment, which carry the rotating parts of various agricultural equipment in the working process, and ensure its smooth operation and increase the life of mechanical equipment.