Fag Insulated Bearing-manufacture,factory,supplier from China

The process has been continuously improved, and in insulated bearings, there is a coating 100μm thick on the surface of the outer or inner ring, which can withstand voltages up to 1000 V DC.

We are authorized distributors of FAG bearings. FAG is a leading manufacturer of almost all types of bearings. We can provide most of the bearing products in the FAG bearing catalogue.

Insulating materials: insulated bearings are usually made of insulating materials, such as ceramics or special alloys, whose insulation properties can effectively prevent the current from being transmitted through the bearing to other components and play a protective role.Application: insulated bearings are widely used in electrical equipment, motors, generators, frequency converters, wind turbines, electric vehicles and other fields, especially suitable for occasions that need to prevent current conduction.

The insulated bearing is a specially designed bearing whose internal structure can effectively isolate the external environment and prevent conductive and conductive heat. Insulated bearings are usually used in special industrial environments or in equipment requiring special protection.Structure composition: The insulated bearing is composed of an inner ring, an outer ring, a rolling body, a cage and a seal.

Inner and outer ring design: The internal and outer rings of the insulated bearing are made of insulating substances or different treatment, so that the modern-day interior the bearing can now not be carried out via the internal and outer rings, so as to reap the impact of electrical insulation.Seal design: The seal format of the insulated bearing is strict, which can efficaciously forestall the infiltration of exterior media and preserve the insulati

Inner and outer ring design: The inner and outer rings of the insulated bearing are made of insulating materials or special treatment, so that the current inside the bearing can not be conducted through the inner and outer rings, so as to achieve the effect of electrical insulation.Seal design: The seal design of the insulated bearing is strict, which can effectively prevent the infiltration of external media and maintain the insulation performance and stability of the bearing.

The insulated bearing adopts a special spraying process to spray high-quality coating on the outer surface of the bearing. The coating has strong adhesion to the substrate and good insulation performance, which can avoid the electric corrosion of the bearing by the induced current, prevent the damage of the current to the grease, the rolling element and the raceway, and improve the service life of the bearing. The process is constantly improving. In insulated bearings, the outer ring or inner ring surface has a layer of 100μm thick coating, which can withstand voltages up to 1000V DC.

Some typical insulating bearing materials include ceramic, graphite and the famous polytetrafluoroethylene (PTFE). Ceramics are widely used in the bearing industry because of their hard diamond, wear-resistant gold and outstanding insulation properties. Graphite is widely used in bearings because of its extremely low friction and high lubrication. PTFE is widely used because of its excellent corrosion resistance and strong insulation. According to actual needs, designers and engineers can also choose other special materials to build insulated bearings.

With high temperature resistance, cold resistance, wear resistance, corrosion resistance, magnetic electrical insulation resistance, oill lubrication, high speed, etc.properties.Ceramic bearing is a hi-tech product using new materials that can be used in extren onments and special condition, and can be widely used in aviation, aerospace, shipbuilding, petroleum, chemical industry, autome tronics, metallurgy, electric power, textile, medical equipment, pumps, scientific research and national defense military and other fields. NameModelTitleFAG 3205 Bearings3205Original Fag Made In Germany Angul

FAG is one of the world's leading bearing manufacturers, whose deep groove ball bearings are widely used in various mechanical equipment and industrial fields. Deep groove ball bearing is a common rolling bearing, with many advantages, such as large bearing capacity, low friction, high speed characteristics.

Advantages: The insulated bearing has good insulation performance, which can effectively isolate the external environment, improve the service life and stability of the bearing, and effectively avoid damage and failure caused by current conduction.Installation precautions: When installing insulated bearings, it is necessary to pay attention to keep bearings clean, lubricated and correctly positioned to ensure their normal operation and service life.

Even if the production of the motor is strictly controlled during the manufacturing process, it is difficult to completely avoid the magnetic asymmetry of the armature and rotor. This asymmetry creates a voltage between the stators, which creates a current through the bearings, especially in AC motors. This current will cause corrosion pits, melting marks, electrical corrosion file lines and discoloration, wear and other damage on the bearing raceway and rolling surface.

FAG bearings are widely used.Including bicycles, food and beverage industries, electrical appliances, furniture industries, chemical and electroplating industries, paints and dyes, textile industries, automobiles, motorcycles, pumps, fans, water treatment, pharmaceutical industries and many other industrial applications.We can provide FAG deep groove ball bearings, tapered bearings, etc.If you need FAG bearings, please feel free to contact us.NameModelTitleFAG 3205 Bearings3205Original Fag Made In Germany angular contact ball bearing 3200 3201 3202 3203 3204 3205FAG 3210 Bearings3210

(1),High-speed bearing: has the advantages of cold resistance, low mechanical elasticity, high pressure resistance, poor thermal conductivity, light weight, small friction coefficient, etc., can be used in 12000 RPM - 75,000 RPM high-speed spindle and other high-precision equipment;(2), High temperature bearing: the material itself has a high temperature resistance of 1200 ° C, and self-lubrication, the use of temperature between 100 ° C -800 ° C does not produce expansion caused by temperature difference.

This bearing adopts ceramic rolling element (ball or roller) made of Si3N4 material; It has excellent insulation performance, its capacitance is basically 40pf, and the insulation performance is better than that of coated bearings. At high temperature, the DC impedance can also reach the range of G ohms, and has good insulation performance. Ceramic rolling element has excellent wear resistance and low lubrication requirement. Especially suitable for high-speed, low friction, low temperature operation; It works well under dry friction conditions.

There are several types of 7000C (∝=15°), 7000AC (∝=25°) and 7000B(∝=40°). The lock of the bearing is on the outer ring, generally the inner and outer rings can not be separated, and can withstand the combined radial and axial load as well as the axial load in one direction. The ability to bear axial load is determined by the contact Angle, and the contact Angle is large, the ability to bear axial load is high.

First of all, one of the characteristics of FAG deep groove ball bearings is a simple structure, consisting of an outer ring, an inner ring, a steel ball and a cage. This simple structure makes the installation and maintenance of deep groove ball bearings more convenient and fast.Secondly, the bearing capacity of FAG deep groove ball bearings is large and can withstand both radial and axial loads.

Deep groove ball bearings are the most commonly used rolling bearings. Its structure is simple and easy to use. It is mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has a certain angular contact ball bearing performance and can bear the combined radial and axial load.

FAG bearings-Deep groove ball bearings are the most popular of all ball bearing types because they have a variety of seals, dust caps, and stop ring arrangements to choose from. The groove of the bearing ferrule is an arc, slightly larger than the radius ball of the bearing ring.FAG bearings are a very famous brand.

Product Description:Cold-rolled carbon steel coil is further processed by hot-rolled carbon steel coil as raw material. It is widely used in household appliances, such as refrigerators, washing machines, air conditioners, etc.

The hub bearing unit is developed on the basis of standard angular contact ball bearings and tapered roller bearings. It combines two sets of bearings into one, with good assembly performance, clearance adjustment can be omitted, light weight, compact structure, and high load capacity. Large, unsealed bearings can be loaded with grease in advance, omit the external hub seal and avoid maintenance, etc., have been widely used in cars, and there is a tendency to gradually expand their application in trucks.

Stamped outer ring needle roller clutch, commonly known as one-way bearing or one-way needle roller bearing,  is a single directional bearing composed of a thin-walled outer ring, cage, spring plate,  and needle roller that is stretched from an alloy sheet. It can be used as a converter, check device,  and overrunning clutch, and is widely used in fitness equipment, cash counting machines, washing machines,  fishing gear, toy cars, and other transmission parts that need to have a reverse stop function.

The seal is an important protective part of the flange bearing, which can prevent dust, water vapor and other impurities from entering the bearing inside, while maintaining the stable state of the grease or lubricating oil inside the bearing to improve the service life and performance of the bearing.Generally speaking, flange bearings have the advantages of simple structure, easy installation, large carrying capacity, good wear resistance, etc., and are widely used in all kinds of industrial machinery and equipment, such as wind turbines, agricultural machinery and metallurgical equipment.

High quality: UBC bearings are made of high quality materials and have undergone strict quality control and testing to ensure reliable product quality.High precision: UBC bearings use advanced production technology and precision machining technology, with precise size and high accuracy, to ensure stable performance.Strong durability: UBC bearings have excellent wear resistance and corrosion resistance, and can operate stably in harsh environments for a long time.Low noise: UBC bearing has been carefully designed and optimized, with low noise and low vibration characteristics, which can reduce