Diameter Bearing 6002-manufacture,factory,supplier from China

Ceramic materials have excellent wear resistance, corrosion resistance, high temperature resistance, low temperature resistance, high hardness, high strength, low expansion coefficient, electrical insulation, no magnetic conductivity and other excellent characteristics.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)706C–6176————0.006707C360177196————0.006708C360188227————0.014709C360199247————0.016723C360233104––––0.002724C360244135————0.014725C360255165————0.0047726C360266

Retentors, usually made of steel or synthetic materials, are used to hold rolling elements in position, ensuring that they maintain the correct clearance and position relationship with each other during use.Single-row angular contact bearings are suitable for all kinds of rotating machinery, such as automobile wheels, motors, fans, etc., which can withstand high-speed operation and large loads.When installing, it is necessary to pay attention to the cleaning and lubrication of the bearing to ensure its performance and life.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter

High load carrying capacity    The cage bars are displaced relative to the roller pitch diameter to enable the rollers to be placed closer to each other, creating room for additional rollers  High stiffness    The increased number of rollers increases radial stiffness.    High speed capabilityThe cage designs are suitable for high speeds, rapid accelerations and peak loads.  Long service life  The black oxide coating of rings and rollers (designation suffix L4B) contributes to extended service life by improving:     

Double-row tapered roller bearings have many advantages in structure and performance, so they are widely used in industrial production.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.237700090000.154302067206E306217.543.250.5600075000.231302077207E35721754.263.5530067000.331302087208E4080186374500063000.422302097209E45851967.883.5450056000.474

The outer diameter (OD) of the cam follower (stud or yoke) can be the standard cylindrical shape or be crowned. Crowned cam followers are used to keep the load evenly distributed if it deflects or if there is any misalignment between the follower and the followed surface. They are also used in turntable type applications to reduce skidding. Crowned followers can compensate for up to 0.5° of misalignment, while a cylindrical OD can only tolerate 0.06°. The only disadvantage is that they cannot bear as much load because of higher stresses.

Single row angular contact ball bearings mainly used forundertaking combined load both from radius and axle andalso for pure axle load,rotator speed is high.Material of bearings is choosed on refining bearing steelGCr15 (100Cr6，SUJ2,S2100) and other type of bearingsteel,balls are adopting GCr15 (100Cr6，SUJ2,S2100) orceramic. The bearings are classified as 7000C (15°)70000AC(25°)、7000B (40) in accordance with theircontact angle,other bearings with different contact angular areavailable on request.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)G

Agricultural bearings are used in conveyors, lawn mowers, combines, hay balers, planters/grain drills, augers, cotton strippers, and more.  They are designed to stand up to extreme conditions and loads.  There are many different designs available.  Their basic components are inner and outer rings, balls, and retainers.  The inner race can be round, square, or hex, and the outer race can be either cylindrical or spherical.  Most agricultural bearings are sealed on both sides with single, double, or triple lip.New domestic modelsOld domestic modelInner diameter (mm)Outer

One of the biggest features of the needle roller bearing is the design of the needle roller. The needle roller has a smaller diameter than other types of rolling elements, so it can achieve a higher load carrying capacity in a limited space.

The range of four-row tapered roller bearings is wide, including not only the traditional design with an intermediate ring between the outer ring and/or the inner ring, but also the modification of the four-row tapered roller bearings with an integrated middle ring and the bearing ring.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.2377000900

Ball bearing with eccentric locking collar is  outer diameter in spherical surface,internal construction is the same as deep groove ball bearings of 6200 6300 series.they both can sustain radial and axial loads.We can supply full series of UC200,UC300,SA200,SB200,UEL200,UK200,SER200,CS200,UC300 series bearings.Such bearings are often used in severe operating conditions where they are exposed to dirts,moisture and high temperature.thus,insert ball bearing are usually with grease groove and oil hole on outer ring,at suitable time,we need to replace fresh grease to secure full performance an

The series of products with flanges on the outer wheel make the axial positioning easy; The bearing seat is no longer needed and becomes more economical. In order to obtain low friction torque, high rigidity and good rotation accuracy of bearings, steel balls with small outer diameter are used. The use of hollow shafts ensures lightweight and wiring spaceThe biggest feature is that the flange and the bearing are integrated.

One of the largest aspects of the needle curler bearing is the sketch of the needle roller. The needle roller has a smaller diameter than different sorts of rolling elements, so it can obtain a greater load carrying capability in a constrained space.

1: High load capacity and accuracyThe internal structure of the bearing is the same as that of the single row deep groove ball. While bearing a large radial load, it can bear axial loads in both directions.The accuracy of the bearing is the same as that of the general accuracy, and it has high rotation accuracy and good high-speed performance2: reasonable aligning structure and the most suitable cooperationThe bearing assembly has the aligning property through the spherical outer diameter bearing and the bearing seat with the spherical inner hole.

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342

Advantage of UC215-48 BearingThe service life of the bearing is prolonged.Its code is uk200 series and uk300 series. This kind of outer spherical ball bearing has a tapered inner hole with an inner diameter of 1:12, which should be used in conjunction with the tightening sleeve.

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

RU cross roller bearings are also known as bearings. The main body of a rolling body usually uses cylindrical or tapered rollers to intersect a single flow path, separated by retainers or spacers, and arranged in a cross pattern. Therefore, the cross roller ring group can withstand loads in all directions, with a stiffness of 3-4 times higher than traditional models. RU cross roller bearing is lubricated by spray. Drilled shrinkage air mixes spray and lubricating oil to produce oil mist.

 Deep Groove Ball Bearings Deep Groove Ball Bearings are highly versatile and extensively used in various industries due to their ability to support higher radial loads and moderate axial loads.

Agricultural FAFNIR Bearing insert bearing 203KRR2 203 RR2 203RR2 are with particularly thick-walled outer rings. In addition to high radial forces, these bearings can also support axial forces in both directions.The outer rings have a crowned or cylindrical outside surface.

Product Description:The length of the 8-foot galvanized roof plate is more commonly used in many construction projects, which is suitable for the laying of the roof of the medium-sized and above buildings, which can ensure a certain coverage area, reduce the number of splicing to reduce the risk of leakage, and is not too long and cause difficulties in handling and installation.

Because the bearing ball is in contact with the bearing point, the load is small.

There are several types of 7000C (∝=15°), 7000AC (∝=25°) and 7000B(∝=40°). The lock of the bearing is on the outer ring, generally the inner and outer rings can not be separated, and can withstand the combined radial and axial load as well as the axial load in one direction. The ability to bear axial load is determined by the contact Angle, and the contact Angle is large, the ability to bear axial load is high.

Product Description:5A06 aluminum rod has good thermal conductivity and can be used to manufacture heat sinks for electronic devices, such as computer CPU heat sinks and heat sinks for high-power electronic devices.

Engineering Machinery Bearing have a large carrying capacity and are suitable for supporting structures with limited installation dimensions.The surface of the journal is hardened as the rolling surface, and the bearing is fitted into the seat hole with a press fit, and there is no need for it to be axially positioned.The bearing should be injected with an appropriate amount of grease before installation.Usually, no relubrication is required after assembly (BK type bearings are used in the support of the journal without the protruding end, the end face is closed for sealing, and can withstand