Cylindrical Thrust Bearing-manufacture,factory,supplier from China

The design of the roller and raceway contact line of all thrust cylindrical roller bearings is optimized to avoid the generation of edge effects.

1.Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations, which can withstand heavy loads and vibration loads without difficulty.2. this kind of bearing can bear a large axial load in a single direction, but can not bear radial load, they do not have automatic aligning ability.3. the thrust cylindrical roller bearing can be divided into thrust cylindrical roller and cage assembly, shaft ring and seat ring.4.

Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations that can withstand heavy loads and vibration loads without difficulty. Such bearings can withstand large axial loads in a single direction, but they cannot withstand radial loads, and they have no automatic aligning capability.

Some cylindrical roller bearings have no ribs on either theinnere rings canelative to eacese can bfree-end bearingsCylindrical roller bearingouter rings has two ribs aother ringhas one ,are capable of takingxial loaone directiobearingshave high radial rigidity and are used primarily for precisionmachine tools.Types NU , N , NNU , and NN are suitable as free-end bearingsTypes NJ and NF can sustain limited axial loads in one directionTypes NH and NUP can be used as fixed-end bearingsNH-type cylindrical roller bearings consist of the Nj-type cylindricalroller bearings andHu-type Lshaped thrust co

Thrust tapered roller bearings can form a very compact bearing configuration, which can withstand very heavy axial loads, is not sensitive to impact loads, and has good rigidity. LYTBZ produces unidirectional tapered roller bearings and bidirectional tapered roller thrust bearings. The screw fixed bearing constitutes a specially designed unidirectional tapered roller thrust bearing and is filled with rollers.Thrust tapered roller bearing features:This bearing is used for rolling mill screw fixed bearing configuration.

Thrust cylindrical roller bearings and thrust roller bearings are suitable for low speed occasions, the thrust tapered roller bearing speed is slightly higher than the thrust cylindrical roller bearing. Bearing knowledgeThrust cylindrical roller bearings are separated bearings and can only withstandThe unidirectional axial load and slight impact can limit the axial displacement of the shaft (or housing) in one direction, so it can be used for unidirectional axial positioning. However, its carrying capacity is much greater than that of thrust ball bearings.

The structure of the thrust roller bearing is generally composed of an inner and outer ring, a thrust roller, a cage and a sealing ring. The inner and outer rings are annular structures, which are installed on the shaft and the housing to carry the axial load. The thrust roller is cylindrical or conical, arranged between the inner and outer rings, and can effectively withstand and transfer the axial load. The cage is a structure that supports and holds the thrust roller, usually made of steel or copper.

The different types of cylindrical roller bearings are designated based on their structural features and intended applications: N..EM: Cylindrical roller bearing with a standard inner ring without any ribs, suitable for radial loads. NU..EM: Bearing with aremovable inner ring and two integral flanges on the outer ring, designed for high radial loads and accommodates axialdisplacement. NJ..EM: Features a removable inner ring and one integral flange on the outer ring, primarily used for applicationswhere axial displacement is required.

According to whether the ring has a rib or not, NSK cylindrical roller bearings are divided into NU, NJ, NUP, N, NF and other single-row bearings, and NNU, NN double-row bearings. The bearing is a structure with separable inner ring and outer ring. Cylindrical roller bearings with inner or outer rings without rims, the inner and outer rings can be axially moved relative to each other, so they can be used as free-end bearings.

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342

Thrust roller bearing is an important mechanical part, which is used to support the axial load acting on the rotating parts. Its use is directly related to the stable operation and life of mechanical equipment, so it should be paid attention to. Advantages of thrust roller bearings The processing technology of thrust roller bearings is very precise, and the production accuracy of its inner ring, outer ring and raceway can reach sub-micron level.

The working principle of thrust roller bearing is to transmit and bear axial load through the linear movement of thrust roller. When the axial load acts on the bearing, the thrust roller will roll along the slide of the inner and outer rings to realize the load transfer.

The important construction modes of the turntable bearing seat are: four-point contact ball bearing seat, double-row angular contact thrust ball bearing seat, interpenetrating cylindrical roller bearing seat, interpenetrating tapered roller bearing seat, and three-row cylindrical roller with turntable bearing seat.According to whether the gear can be carried and the spread of the gear is divided into: toothless, external or internal gear and other different structures.The four-point contact ball turntable bearing seat has a higher static bearing capacity, the interspersed cylindrical roller be

Advantage of 51118 BearingApplication scope of thrust ball bearing:It is only applicable to the parts bearing one side of axial load and low speed, such as crane hook, vertical water pump, vertical centrifuge, Jack, low-speed reducer, etc.The shaft ring, seat ring and rolling element of the bearing are separated and can be installed and disassembled separately.TypeIn addition, the bearing can bear axial load, but can not bear radial load.Composition of thrust ball bearing: the thrust ball bearing is composed of seat ring, shaft ring and steel ball cage assembly.

The structure of one-way thrust ball bearing is relatively simple, mainly composed of outer ring, inner ring, steel ball, cage and cover.The outer ring is the outermost part of the thrust ball bearing, usually made of steel material. The inner ring is located inside the outer ring, and the gap between the outer ring is the movement space of the steel ball. The steel ball is the key component connecting the outer ring and the inner ring, which can provide the function of carrying the thrust load.

Thrust roller bearing is a type of bearing specially designed to bear axial loads, which consists of thrust rollers to provide good support and stability during high-speed rotation. Thrust roller bearings are usually used in parts of mechanical equipment that need to withstand high axial loads, such as gear boxes, turbines, centrifuges, etc.

Typical applications include Combine harvesters, balers, seeder, tillage and lawn and garden machinery. This range of bearings for agricultural machinery complements our large stock of housed bearings units.Agricultural Ball Bearings are used in nearly every piece of machinery you see.

INA bearings schaeffler group is a leading manufacturer of almost all bearing types.We are INA bearing manufacturer and can provide a full range of INA bearings. For example: INA ball bearings,INA cam follower，INA thrust bearing，iINA spherical plain bearings，INA flange bearing，INA banded thrust bearing.The following is a detailed introduction about some INA bearings, if you want to know more, please contact us, we have 24 hours online service.INA Thin Section BearingsINA Thin-walled bearings are high-precision products with low operating noise and high load carrying capacity.

Product Description:Thickness of 1/2 inch (about 12.7 mm), in the field of industrial machinery manufacturing, often used to manufacture large mechanical equipment shell, work platform, etc., to protect the internal mechanical structure and provide a stable working surface.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollAluminum Grade1000 SeriesIndustrial Pure Aluminum(1050,1050A,1060,

Product Description:High carbon steel plates have a higher carbon content, usually between 0.60%-1.50%. Widely used in the manufacture of various cutting tools, such as cutting tools, saw blades, etc.

Mainly bear a large unidirectional axial load, the greater the contact Angle, the greater the load bearing capacity. The cage material is steel plate, brass or engineering plastic, and the forming method is stamping or turning, depending on the bearing form or use conditions.

This type of bearing is widely used in industrial automatic robots, working machinery and medical facilities, where high rigidity, tightness and high speed are required to ensure accuracy.

Product Description:Q355B is widely used in high-rise buildings, long-span building structural frames, such as steel beams, steel columns, etc., because its high strength can effectively reduce the cross-section size of structural members. While meeting the requirements of structural strength and stability, it can reduce the building's self-weight and improve the utilization rate of building space.

Categories:Rolling bearings: commonly found in truck transmission systems, such as tapered roller bearings, spherical roller bearings, etc.Plain bearings: common in the steering system of trucks, such as linear bearings, hydraulic bearings, etc.Three.Rolling bearings: By rolling the roller (ball or roller) between the inner ring and the outer ring, to achieve load transfer and reduce friction.Plain bearings: Through the oil film sliding between bearings, to achieve load support and reduce friction.Bearing NumberDimensions(mm)dDB566425.H195 80079293.8148135566426.H195 58107968125115566427.H195