Combined Bearings-manufacture,factory,supplier from China

Double row angular contact ball bearings can bear large radial loads, mainly radial and axial combined loads and torque loads, limiting the axial displacement of both sides of the shaft.

A single row angular contact bearing is a common type of bearing, usually consisting of an inner ring, an outer ring, a retainer and a rolling element. It is designed so that the bearing can withstand radial, axial or combined loads when rolling.

Deep groove ball bearings are the most commonly used rolling bearings. Its structure is simple and easy to use. It is mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has a certain angular contact ball bearing performance and can bear the combined radial and axial load.

Combined needle roller bearings, a special type of bearing, can be added between the inner and outer rings of the needle roller components to achieve balance accuracy, reduce vibration and noise effects.

NTN tapered roller bearings are mainly used to bear radial and axial combined loads mainly based on radial loads, with high stiffness and rotation accuracy, and have large bearing capacity and low limit speed compared with angular contact ball bearings. Its carrying capacity depends on the Angle of the raceway of the outer ring, and the greater the Angle, the greater the carrying capacity.

Stainless steel band seat bearings are applied by stainless steel outer spherical bearings combined with stainless steel bearing seats.

Thrust roller bearings are used to bear axial and radial combined loads based on axial loads, but the radial load shall not exceed 55% of the axial load.

The raceway with the inclination Angle enables the tapered roller bearing to bear the combined radial and axial loads. The greater the Angle between the outer raceway and the bearing center line, the greater the ability to withstand the axial and radial load ratio. The linear contact between the roller and the raceway makes the tapered roller bearing have a great load bearing capacity. This feature and the ability to withstand radial loads, axial loads and both combined loads make tapered roller bearings ideal for many applications.

1.Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations, which can withstand heavy loads and vibration loads without difficulty.2. this kind of bearing can bear a large axial load in a single direction, but can not bear radial load, they do not have automatic aligning ability.3. the thrust cylindrical roller bearing can be divided into thrust cylindrical roller and cage assembly, shaft ring and seat ring.4.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis, which means that they are designed to accommodate combined loads, i.e. simultaneously supporting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.

Single Row Angular Contact BearingsThese single row angular contact bearings are suitable for general use where axial loads are applied in only one direction. They are stand-alone bearings and are not designed to be combined or mated with another bearing.Double Angular Contact BearingsDuplex bearings are two matched bearings that provide precise alignment both radially and axially. By using duplex bearings, vibrations can be eliminated and higher load capacities can be achieved.

Tapered roller bearings are suitable for bearing radial loads, unidirectional axial loads and radial and axial combined loads. The axial load capacity of tapered roller bearings depends on the contact Angle α, that is, the Angle of the outer ring raceway, the greater the contact Angle α, the greater the axial load capacity. Generally tapered roller bearings do not allow Angle errors, but the surface of the roller and raceway can be specially designed to allow 2'~4' Angle errors.

Advantage of 30307 Bearing• 302XX, 303XX, 313XX, 320XX, 322XX, 323XX and 329XX series• Double row tapered roller bearing series (details available on request)• Pressed steel and polyamide cages• Standard accuracy P0 and higher accuracy P6.• A variety of inch bearings are also availableTypeA singleSingle row tapered roller bearings can withstand combined radial and axial loads.

Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations that can withstand heavy loads and vibration loads without difficulty. Such bearings can withstand large axial loads in a single direction, but they cannot withstand radial loads, and they have no automatic aligning capability.

Single row angular contact ball bearings mainly used forundertaking combined load both from radius and axle andalso for pure axle load,rotator speed is high.Material of bearings is choosed on refining bearing steelGCr15 (100Cr6，SUJ2,S2100) and other type of bearingsteel,balls are adopting GCr15 (100Cr6，SUJ2,S2100) orceramic. The bearings are classified as 7000C (15°)70000AC(25°)、7000B (40) in accordance with theircontact angle,other bearings with different contact angular areavailable on request.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)G

Product Description:The S275 carbon steel coil is made of rolled steel. This roll form is easy to store and transport and takes up relatively little space.

The turntable bearing seat is a kind of large and extra-large bearing seat which can accept comprehensive load and has the characteristics of compact structure, sensitive rotation and convenient maintenance.

Product Description:Q355B carbon steel coil has high strength and good plasticity, in the field of machinery manufacturing, can be used to manufacture key parts of heavy machinery, such as crane boom, mining machinery wear-resistant parts.

Flange bearing is a kind of bearing widely used in various mechanical equipment, it has the following characteristics:Simple structure: flange bearings are usually composed of an inner ring, an outer ring, a rolling element and a cage, which is simple in structure and relatively easy to install and maintain.High load capacity: Flange bearings usually use spherical or tapered rollers and other rolling elements, with high load capacity and anti-fatigue characteristics.Self-positioning: Flange bearings can allow a certain degree of deflection and axial displacement during installation, and self-p

Single direction thrust ball bearings:consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they must be supported so that all balls can be evenly loaded. Bearings carry the axial load only in one direction. They are not able to carry radial forces. Double direction thrust ball bearings:have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces. The shaft washer has raceways on both sides and is fixed on the journal.

1. Centripetal needle roller and cage assembly (Type K)2, needle roller bearings with double locking rings (NA, NKI, RNA, NK)3. Single row needle roller bearing with double rib on outer ring (NA, NKI, RNA, NK)4, double row needle roller bearings with double guard (NA type, RNA type)5, stamped needle roller bearings (HK type, BK type)Note: This bearing has low cost, large bearing capacity, and is suitable for supporting structures with limited installation size. The journal surface is hardened as a rolling surface, and the bearing is pressed into the seat hole without axial positioning.

Railway Axle BearingsAxle bearings: tapered roller bearings, tapered roller bearing boxes, cylindrical roller bearings, spherical roller bearings. Railway axle bearings can be subjected to high shocks and loads. Mounting space is also limited, so in many cases compact, double-row bearings with high load ratings are used.Railway Axle Box BearingAxlebox bearings should have a large load carrying capacity, be able to resist shock vibration, and must have a high life expectancy, safety and reliability, smaller size and quality.

Product Description:The 6063 Aluminum Pipe is a medium-strength alloy with excellent extrudability, corrosion resistance, and surface finish.

Product Description:It is used to manufacture the frame of shading facilities such as building sunshades and shutters.