carbon steel strip-manufacture,factory,supplier from China

(Total 24 Products for carbon steel strip)
Product Description:A36 carbon steel is a kind of low carbon steel, with good toughness, can withstand a certain impact and dynamic load, will not easily brittle fracture. Widely used in building structure frame, such as beams, columns and so on.
  Contact Now
Product Description:High carbon steel plates have a higher carbon content, usually between 0.60%-1.50%. Widely used in the manufacture of various cutting tools, such as cutting tools, saw blades, etc.
  Contact Now
Product Description:ASTM A36 carbon steel plates are used in the manufacture of mechanical parts such as bases, brackets, etc.
  Contact Now
Product Description:Q195 carbon steel is mainly composed of iron (Fe) and a small amount of carbon (C), and the elongation is high, up to about 33% (standard distance 50mm).
  Contact Now
Product Description:The yield strength of AH36 carbon steel is not less than 355MPa, and the tensile strength is between 490-620 mpa.
  Contact Now
Product Description:Mild steel plates have a lower carbon content, usually no more than 0.25%. The lower carbon content makes the steel have good toughness, ductility and weldability. Used in the manufacture of home appliances, such as refrigerators, washing machines, air conditioners, etc.
  Contact Now
Product Description:Q235 carbon steel is one of the most commonly used materials in building structures. It can be used to make main load-bearing structural components such as beams and columns of buildings. Its strength can withstand the building's own weight and external loads, such as wind and earthquake forces.
  Contact Now
Product Description:SS400 carbon steel can be used for some non-critical structural components of the car body, such as some reinforcement plates and brackets inside the body.
  Contact Now
Product Description:The S235JR has a low carbon steel content and can be used in some non-critical parts of the vehicle, such as the interior panel of the carriage, spare tire frame, etc.
  Contact Now
Product Description:Q215 carbon steel coil is one of the commonly used materials for manufacturing welded steel pipes. Through crimping, welding and other processes, carbon steel coils can be made into steel pipes of different diameters and wall thicknesses, which are widely used in water supply and drainage, gas transmission, heating pipes and other fields. It can also be used to manufacture various accessories in the pipeline system, such as elbows, tees, quads, etc.
  Contact Now
Product Description:Q345 carbon steel plate is used in the manufacture of petrochemical equipment tanks, pipelines, etc., as well as power equipment in the bracket, shell, etc.
  Contact Now
Product Description:Hot-rolled carbon steel coils are made by rolling billets at high temperatures (usually heated to around 1000-1250 °C). Widely used in the manufacture of various mechanical parts, such as shafts, gears, connecting rods and so on.
  Contact Now
Product Description:The S275 carbon steel coil is made of rolled steel. This roll form is easy to store and transport and takes up relatively little space.
  Contact Now
Product Description:Cold-rolled carbon steel coil is further processed by hot-rolled carbon steel coil as raw material. It is widely used in household appliances, such as refrigerators, washing machines, air conditioners, etc.
  Contact Now
Product Description:Q355B carbon steel coil has high strength and good plasticity, in the field of machinery manufacturing, can be used to manufacture key parts of heavy machinery, such as crane boom, mining machinery wear-resistant parts.
  Contact Now
Product Description:Q195 carbon steel coil due to its good plasticity, can be used to manufacture light steel keel, can be easily processed into various shapes of keel, and can withstand a certain building load.
  Contact Now
Product Description:Q355B is widely used in high-rise buildings, long-span building structural frames, such as steel beams, steel columns, etc., because its high strength can effectively reduce the cross-section size of structural members. While meeting the requirements of structural strength and stability, it can reduce the building's self-weight and improve the utilization rate of building space.
  Contact Now
Product Description:The manufacture of mechanical support and base is an important application of A36 carbon steel coil in mechanical manufacturing. For example, the base of the machine tool, the chassis support of the construction machinery, etc., need enough strength to support the weight of the equipment and withstand various forces during the work process.
  Contact Now
Product Description:The S235J0 carbon steel coil can be used to manufacture pipes for transporting liquids or gases. By crimping and welding processes, the coils can be made into pipes of different diameters and wall thicknesses. It is widely used in water supply and drainage system, low pressure gas transmission system and other fields.
  Contact Now
Product Description:The relatively low carbon content of Q295A steel makes the steel have good welding performance, which is convenient for site construction, and can be used to make the frame structure of the workshop, such as beams, columns, etc., and quickly build the main structure of the workshop.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A633, JIS G3101-2004, ASTM A678 ASTM A588, ASTM A242,etcMaterialA36,SS400,A283   Gr.A,.Gr.B.Gr.C,A285 Gr.A,.Gr.B.Gr.C,Q235,Q195,Q215,Q34
  Contact Now
Product Description:The base plate of HDG Steel Coil (hot-dip galvanized steel coil) is usually cold-rolled steel sheet or steel strip. HDG steel coil thickness range is wide, generally from 0.3mm-3.0mm between.
  Contact Now
Product Description:NM400 and NM500 are wear-resistant steel plates, mainly used for occasions requiring high wear resistance.
  Contact Now
Product Description:It plays an important role in the body and chassis manufacturing of commercial vehicles (such as trucks and buses).
  Contact Now
Product Description:The quarter-inch galvanized steel plate is based on high-quality steel, usually low or medium carbon steel.
  Contact Now
Relate News
The material of carbon steel plate is plain carbon steel or carbon steel, which is a steel with a carbon content of less than 2.11% and no metal elements intentionally added. In addition to carbon, it also contains a small amount of sulfur, silicon, phosphorus, manganese and other elements .
Galvanized coil, a thin steel sheet that is dipped in a bath of molten zinc to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously dipped in the galvanizing tank with molten zinc to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel panel is also made by hot dip method, but it is heated to about 500℃ immediately after coming out of the tank, so that it can form an alloy film of zinc and iron.
A516GR60 is generally SA516GR60, which is equivalent to domestic SA516Gr70. SA516Gr60 belongs to the carbon steel plate for medium-sized stoves and low-temperature pressure vessels. It implements ASME standards. It was developed and produced by Wuyang Iron and Steel Co., Ltd. in 2006. It is widely used in petroleum, chemical, power station, boiler and other industries.
Aluminum tube refers to a metal tubular material that is hollow along its entire longitudinal length through extrusion processing of pure aluminum or aluminum alloy. There can be one or more closed through holes, the wall thickness and cross-section are uniform, and they are delivered in straight lines or in rolls. Widely used in automobiles, ships, aviation, electrical appliances, agriculture, electromechanical, home furnishing and other industries.
Aluminum plate refers to the aluminum material with a thickness of more than 0.2mm to less than 500mm, a width of more than 200mm, and a length of less than 16m. With the progress of large equipment, there are more aluminum plates that can be as wide as 600mm).Aluminum plate refers to a rectangular plate processed by rolling aluminum ingots, divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium-thick aluminum plate, patterned aluminum plateMaintainThe specific cleaning steps of the aluminum plate are as follows:1.