Caged Roller Bearings-manufacture,factory,supplier from China

Structure:Internal Structure and Retainer Material VariationC: Symmetrical roller, Stamped Steel retainerCA: Symmetrical roller, one-pice brass cageCTN1: Symmetrical roller, nylon cageE: Third generation design.

The main uses of conical roller bearings include the following aspects1. Construction machinery field: Conical roller bearings are widely used in all kinds of heavy construction machinery and equipment, such as excavators, loaders, bulldozers, road rollers, cranes, etc. These equipment need to withstand large axial load and radial load, and have high speed and accuracy requirements, cone roller bearings can meet these requirements to ensure the normal operation of the equipment.2.

The different types of cylindrical roller bearings are designated based on their structural features and intended applications: N..EM: Cylindrical roller bearing with a standard inner ring without any ribs, suitable for radial loads. NU..EM: Bearing with aremovable inner ring and two integral flanges on the outer ring, designed for high radial loads and accommodates axialdisplacement. NJ..EM: Features a removable inner ring and one integral flange on the outer ring, primarily used for applicationswhere axial displacement is required.

Double-row tapered roller bearings are usually used in applications that require large loads and high-speed rotation, such as wind turbines, metallurgical equipment, rolling mills and heavy machinery, etc.

Tapered roller bearings are separated bearings, and the inner and outer rings of the bearings are equipped with tapered raceways. This kind of bearing is divided into single row, double row and four row tapered roller bearings and other different structural types according to the number of rows of rollers installed. Single-row tapered roller bearings can withstand radial loads and axial loads in a single direction.

RU cross roller bearings are also known as bearings. The main body of a rolling body usually uses cylindrical or tapered rollers to intersect a single flow path, separated by retainers or spacers, and arranged in a cross pattern. Therefore, the cross roller ring group can withstand loads in all directions, with a stiffness of 3-4 times higher than traditional models. RU cross roller bearing is lubricated by spray. Drilled shrinkage air mixes spray and lubricating oil to produce oil mist.

There are two main types of bearings widely used in industrial robots: constant cross-section thin-walled bearings and RU cross roller bearings. The bearing of an industrial robot is one of the key components suitable for the joints of industrial robots or the turntables of machining centers, robots, medical devices, measuring instruments, IC manufacturing equipment, etc., and has a wide range of uses.

The range of four-row tapered roller bearings is wide, including not only the traditional design with an intermediate ring between the outer ring and/or the inner ring, but also the modification of the four-row tapered roller bearings with an integrated middle ring and the bearing ring.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.2377000900

Thrust tapered roller bearings can form a very compact bearing configuration, which can withstand very heavy axial loads, is not sensitive to impact loads, and has good rigidity. LYTBZ produces unidirectional tapered roller bearings and bidirectional tapered roller thrust bearings. The screw fixed bearing constitutes a specially designed unidirectional tapered roller thrust bearing and is filled with rollers.Thrust tapered roller bearing features:This bearing is used for rolling mill screw fixed bearing configuration.

Axial (Thrust) needle roller bearings are units comprising axial needle rollers and cage assemblies and axial bearing washers with a centring spigot. Axial (Thrust) needle roller bearings are able to accommodate heavy axial loads. They are insensitive to shock loads and provide a high degree of bearing units stiffness within a minimum axial space. They represent unidirectional bearings and can accommodate axial loads acting in one direction only.Using axial (thrust) needle roller bearings, it is possible to make compact bearing units.

Needle roller bearing is a common mechanical part, which is mainly used to support the movement of the rotating shaft. The working principle of the needle roller bearing is to use the rolling body (needle roller) to roll between the inside and outside, thereby reducing friction and resistance, so that the bearing can withstand larger loads and rotational speeds.The structure of the needle roller bearing is relatively simple, consisting of an inner ring, an outer ring, a needle roller and a cage.

Combined needle roller bearings, a special type of bearing, can be added between the inner and outer rings of the needle roller components to achieve balance accuracy, reduce vibration and noise effects.

NTN tapered roller bearings are mainly used to bear radial and axial combined loads mainly based on radial loads, with high stiffness and rotation accuracy, and have large bearing capacity and low limit speed compared with angular contact ball bearings. Its carrying capacity depends on the Angle of the raceway of the outer ring, and the greater the Angle, the greater the carrying capacity.

The structure of the thrust roller bearing is generally composed of an inner and outer ring, a thrust roller, a cage and a sealing ring. The inner and outer rings are annular structures, which are installed on the shaft and the housing to carry the axial load. The thrust roller is cylindrical or conical, arranged between the inner and outer rings, and can effectively withstand and transfer the axial load. The cage is a structure that supports and holds the thrust roller, usually made of steel or copper.

Automobile hub bearing is one of the important parts of automobile, which plays the role of supporting wheel rotation and transmitting power. Below I will introduce the structure, function and characteristics of automotive hub bearings in detail.Structure: Automotive hub bearings are usually composed of several parts, such as an inner ring, an outer ring, a rolling element (such as a steel ball or roller), a cage and a seal. The inner ring is the part connected to the axle, and the outer ring is connected to the wheel.

Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction.The type code of tapered roller bearings is 30,000, and tapered roller bearings are separable bearings.

Product Description:S220GD+Z Galvanized Steel Plate is a low alloy steel grade known for its exceptional strength and corrosion resistance. This product is compliant with the EN 10346-2015 standard, which specifies the technical delivery conditions continuously hot-dip coated steel flat products for cold forming. Characterized by a minimum yield strength of 220 MPa, S220GD+Z offers a robust zinc coating that provides excellent protection against rust and other forms of corrosion, making it suitablefor a variety of applications in construction, automotive, and home appliances.

Double row deep groove ball bearing:Design: With two balls, these bearings can handle a higher load capacity than a single row of bearings.Application: They are suitable for bearing arrangements where the bearing capacity of a single row of bearings is insufficient, for example in heavy industry applications.Features: Double-row bearings are slightly wider than single-row bearings, but offer better load distribution and improved reliability for demanding applications.Both single-row and double-row boring deep groove ball bearings are designed with high-quality materials to ensure durability an

The design of the roller and raceway contact line of all thrust cylindrical roller bearings is optimized to avoid the generation of edge effects.

FAG bearings are widely used.Including bicycles, food and beverage industries, electrical appliances, furniture industries, chemical and electroplating industries, paints and dyes, textile industries, automobiles, motorcycles, pumps, fans, water treatment, pharmaceutical industries and many other industrial applications.We can provide FAG deep groove ball bearings, tapered bearings, etc.If you need FAG bearings, please feel free to contact us.NameModelTitleFAG 3205 Bearings3205Original Fag Made In Germany angular contact ball bearing 3200 3201 3202 3203 3204 3205FAG 3210 Bearings3210

Product Description:5mm galvanized steel plate, this thickness can provide more considerable structural strength, can withstand greater pressure, tension and shear force, in the field of construction can be used as load-bearing components, such as building beams, columns and other secondary structural components, can effectively bear and transfer the load; In industrial manufacturing, it can be used to manufacture equipment shells, chassis, brackets, etc.

NTN angular contact ball bearings are suitable for a wide range of industrial equipment and machinery, including but not limited to the following applications:Machine tools and CNC equipment: used to support spindles and other rotating parts to ensure high precision and high-speed stable operation of the equipment.Automobile and motorcycle: widely used in engine, transmission system, suspension system and other components to ensure the smooth running of cars and motorcycles.Construction machinery: such as excavators, cranes, bulldozers, etc., used to withstand the huge load and bumpy vibration

A flange bearing is a bearing widely used in industrial machinery, which has a flange (usually circular) to be fixed in the mechanical equipment. The flange bearing consists of an inner ring, an outer ring, a rolling element (such as a steel ball, roller, roller, etc.), a cage and a seal.First of all, the inner ring and the outer ring are the main bearing parts of the flange bearing, they are usually made of high-quality steel, after a good heat treatment process to ensure their hardness and wear resistance.

Flanged linear bearings can also play a guiding role. It can make the moving parts move according to the predetermined trajectory through the roller or slider set in its interior, avoiding deviation and shaking. For example, in machine tool processing, flange linear bearings are often used to guide the movement of the table to ensure that the cutting tool can accurately remove the coarse and fine, improving the processing accuracy.