C3S1 Spherical Roller Bearing 360*540*134mm-manufacture,factory,supplier from China

Outer spherical bearing with seat is a high-precision component product composed of greased sealed deep groove ball bearings and bearing seats of various shapes.

The inner and outer rings are made of high-quality bearing steel material, with good hardness and wear resistance, and can withstand high-speed rotation and heavy load conditions.The roller adopts cylindrical or conical design, which can effectively share the radial and axial load, reduce rolling friction, and improve the rotation efficiency of the bearing.The cage is made of steel or copper material, with good strength and toughness, which can support the roller stably and extend the service life of the bearing during high-speed operation.The aligning design can automatically adjust the relat

In order to ensure the normal operation of NACHl's self-aligning roller bearings and extend their service life, proper installation and maintenance are required:When installing, pay attention to the alignment of bearings and axial centripetal to avoid bearing damage caused by tilt and excessive load.Regularly check the lubrication status of bearings, maintain proper lubrication grease, ensure normal lubrication of bearings, reduce friction and wear.Regularly clean the outer surface of the bearing and the surrounding environment to avoid dust and impurities entering the bearing interior, af

Aligning roller bearings have two rows of rollers, mainly bearing radial loads, but also can withstand axial loads in either direction. It has high radial load capacity, especially suitable for heavy loads or dynamic loads, but cannot withstand pure axial loads. This kind of bearing outer ring raceway is spherical shape, so its aligning performance is good, can compensate for the coaxial error.Self-aligning roller bearings are divided into two different structures according to the roller cross section shape: symmetrical spherical roller bearings and asymmetric spherical roller bearings.

NACHl's self-aligning roller bearings are a common and important industrial part, widely used in a variety of mechanical equipment and construction machinery. It is mainly composed of an outer ring, an inner ring, a roller, a cage and other components, and supports the rotating and swinging shaft through rolling friction. Aligning roller bearing has large radial load capacity and high axial load capacity, as well as excellent self-aligning performance, and can adapt to the relative tilt and axial change between shaft and seat when working.

Products mainly used in farming machinery include outer spherical ball bearings and housing units, sealed deep groove ball bearings and angular contact ball bearings, tapered roller bearings, hexagonal and square bore bearings, as well as idler and chain drive gear tooth units.The perfect seal design means that the bearing has a significantly longer service life than its peers, even under harsh working conditions. The large capacity of the grease storage space ensures that the sealed bearing does not require any maintenance.

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

Stainless steel band seat bearings are applied by stainless steel outer spherical bearings combined with stainless steel bearing seats.

Railway Axle BearingsAxle bearings: tapered roller bearings, tapered roller bearing boxes, cylindrical roller bearings, spherical roller bearings. Railway axle bearings can be subjected to high shocks and loads. Mounting space is also limited, so in many cases compact, double-row bearings with high load ratings are used.Railway Axle Box BearingAxlebox bearings should have a large load carrying capacity, be able to resist shock vibration, and must have a high life expectancy, safety and reliability, smaller size and quality.

We are an authorized dealer of NACHI bearings. We can provide most of the bearing products in NACHI bearing catalogue. We offer a full line of NACHI products including Ball Bearings, Self-Aligning Bearings, Angular Contact Bearings, Cylindrical Bearings, Needle Roller Bearings and Spherical Bearings at very competitive prices for same day or next day delivery.NACHI Cylindrical Roller BearingsThe structure of cylindrical roller bearings is the simplest of all radial roller bearings, whose inner ring, outer ring and rollers are in line contact, with a large radial load capacity.

Spruce develops and supplies a wide range of axles, drive units and traction motor bearings for railway rolling stock. These bearings feature high performance, high reliability and long-term maintenance-free service to support railway companies in providing fast, safe and reliable transport.Axle bearings: tapered roller bearings, tapered roller bearing cartridge, cylindrical roller bearings, spherical roller bearings.Railway axle bearings are subjected to heavy impacts and loads.

1: High load capacity and accuracyThe internal structure of the bearing is the same as that of the single row deep groove ball. While bearing a large radial load, it can bear axial loads in both directions.The accuracy of the bearing is the same as that of the general accuracy, and it has high rotation accuracy and good high-speed performance2: reasonable aligning structure and the most suitable cooperationThe bearing assembly has the aligning property through the spherical outer diameter bearing and the bearing seat with the spherical inner hole.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

Needle roller bearings are equipped with thin and long rollers (roller length is 3 to 10 times the diameter, the diameter is generally not greater than 5mm), so the radial structure is compact, its inner diameter size and load capacity are the same as other types of bearings, and the outer diameter is the smallest, especially suitable for radial installation size limited support results.

Combined needle roller bearings, a special type of bearing, can be added between the inner and outer rings of the needle roller components to achieve balance accuracy, reduce vibration and noise effects.

NTN deep groove ball bearing is a common rolling bearing, widely used in various mechanical equipment and industrial fields. The deep groove ball bearing consists of an inner ring, an outer ring, a ball and a cage, and is designed to withstand radial and axial loads and maintain stable operation at high speeds. The structure, performance and application characteristics of NTN deep groove ball bearings will be introduced in detail below.

Thrust roller bearing is an important mechanical part, which is used to support the axial load acting on the rotating parts. Its use is directly related to the stable operation and life of mechanical equipment, so it should be paid attention to. Advantages of thrust roller bearings The processing technology of thrust roller bearings is very precise, and the production accuracy of its inner ring, outer ring and raceway can reach sub-micron level.

Product Description:The manufacture of mechanical support and base is an important application of A36 carbon steel coil in mechanical manufacturing. For example, the base of the machine tool, the chassis support of the construction machinery, etc., need enough strength to support the weight of the equipment and withstand various forces during the work process.

A flange bearing is a bearing widely used in industrial machinery, which has a flange (usually circular) to be fixed in the mechanical equipment. The flange bearing consists of an inner ring, an outer ring, a rolling element (such as a steel ball, roller, roller, etc.), a cage and a seal.First of all, the inner ring and the outer ring are the main bearing parts of the flange bearing, they are usually made of high-quality steel, after a good heat treatment process to ensure their hardness and wear resistance.

Product Description:3mm galvanized steel sheet with thickness accuracy of 3mm. This thickness has both strength and lightness, and is suitable for places where weight is limited and structural strength is required, such as light industrial equipment enclosures and interior decorative metal components.

Product Description:In interior decoration, it can be used to make decorative strips, partitions, screens and so on. Its diverse cross-section shapes and processing methods can create a rich decorative effect.

I.

Product Description:It plays an important role in the body and chassis manufacturing of commercial vehicles (such as trucks and buses).

Single direction thrust ball bearings:consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they must be supported so that all balls can be evenly loaded. Bearings carry the axial load only in one direction. They are not able to carry radial forces. Double direction thrust ball bearings:have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces. The shaft washer has raceways on both sides and is fixed on the journal.