Bearing DL1512 Size 15x21x12mm Drawn Cup Full Complement Needle Roller Bearing-manufacture,factory,supplier from China

»drawn cup needle roller bearings                            »solid needle roller bearings»combined needle roller bearings                             »drawn cup roller clutch»heavy duty needle roller bearings                           »sealed needle bearings»thrust needle roller bearings                           

Secondly, IKO's needle roller bearings are compact in structure, light in weight, easy to install, simple and stable in structure, which can effectively reduce the overall size and weight of mechanical equipment, improve the work efficiency and flexibility of mechanical equipment, and are suitable for various axial and radial loads.In addition, IKO needle roller bearings have high bearing capacity and fatigue resistance, can run stably for a long time, extend the service life of the equipment, reduce the frequency of maintenance and replacement of bearings, reduce the maintenance cost of t

1.KR design cam followers are fitted with a needle roller and cage assembly. They are also available with a full complement needle roller set, which is identified by the letter V at the end of the basic designation.

The ring and roller of our ceramic bearing adopts full ceramic materials including zirconia (ZrO2), silicon nitride (SisN4), silicon carbide.

Needle roller bearing is a common rolling bearing, using needle roller as the rolling body, can withstand the radial and axial load.Structure: Needle roller bearings are mainly composed of outer ring, inner ring, needle roller, cage and seal. The shape size of the needle roller bearing is small, saving space, suitable for limited space design.

Needle roller bearings are equipped with thin and long rollers (roller length is 3 to 10 times the diameter, the diameter is generally not greater than 5mm), so the radial structure is compact, its inner diameter size and load capacity are the same as other types of bearings, and the outer diameter is the smallest, especially suitable for radial installation size limited support results.

The outer ring double guard (or double lock ring) with cage needle roller bearing NA, NKI type, can be installed respectively inner ring and outer ring (with lock ring, a full set of needle roller and cage), high speed, divided into single and double row two. Such needle roller bearings with inner rings may be used if the shaft cannot be used as a raceway, i.e.

We are IKO bearing distributors，we offer a full range of IKO Bearings at very competitive prices, including high quality IKO needle bearing, crossed roller bearings, thrust bearings, roller bearings, ball linear motion rolling guides, roller rolling guides, linear motion rolling guides , precision positioning tables and mechanical parts. Most products can be shipped same or next day.IKO needle roller bearings can be roughly divided into radial bearings and thrust bearings according to the direction of the load they can withstand.

1. Centripetal needle roller and cage assembly (Type K)2, needle roller bearings with double locking rings (NA, NKI, RNA, NK)3. Single row needle roller bearing with double rib on outer ring (NA, NKI, RNA, NK)4, double row needle roller bearings with double guard (NA type, RNA type)5, stamped needle roller bearings (HK type, BK type)Note: This bearing has low cost, large bearing capacity, and is suitable for supporting structures with limited installation size. The journal surface is hardened as a rolling surface, and the bearing is pressed into the seat hole without axial positioning.

One of the largest aspects of the needle curler bearing is the sketch of the needle roller. The needle roller has a smaller diameter than different sorts of rolling elements, so it can obtain a greater load carrying capability in a constrained space.

IKO is a well-known manufacturer specializing in the production of various types of needle roller bearings, and its needle roller bearing products enjoy a high reputation around the world. IKO's needle roller bearings have a variety of excellent characteristics, and the following will describe the characteristics and applications of its needle roller bearings in detail.First of all, IKO's needle roller bearings are made of high-quality materials, have extremely high wear resistance and corrosion resistance, and can operate stably in a variety of harsh environments.

The working principle of needle roller bearings is to use rolling friction to reduce friction and resistance. When the bearing is subjected to axial or radial load, the needle roller rolls between the inner and outer rings, thereby reducing friction and resistance.

Strong bearing capacity: Due to the large number of needle roller, needle roller bearings have a high bearing capacity, suitable for bearing large radial and axial loads. (2) Small starting torque: the friction inside the needle roller bearing is small, and the starting torque is small, making the starting speed of the bearing faster. (3) Simple structure: The structure of needle roller bearings is relatively simple, easy to install and maintain, and low cost.

1) Less coefficient of friction, High limiting speed, Large size range, Variations of structure.2) Tapered Roller Bearings are designed such like cup. Cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis.3) Single-row tapered roller bearing is able to carry radial and axial load in one directionssimultaneously because an axial component of produced when this type of bearings loadedradically, two bearings are used together facing one another, or two or more bearings arematched and used.

Needle roller bearing is a common mechanical part, which is mainly used to support the movement of the rotating shaft. The working principle of the needle roller bearing is to use the rolling body (needle roller) to roll between the inside and outside, thereby reducing friction and resistance, so that the bearing can withstand larger loads and rotational speeds.The structure of the needle roller bearing is relatively simple, consisting of an inner ring, an outer ring, a needle roller and a cage.

1.Needle roller bearings for stamping outer rings. There are two kinds of bearings: perforated type and sealed type. The needle roller bearing has no inner ring, and the needle roller directly contacts the surface of the shaft, so the processing accuracy and heat treatment hardness of the shaft should be the same as that of the bearing inner ring.2. Solid ring needle roller bearings solid ring needle roller bearings, commonly used solid ring needle roller bearings are NA type and RNA type.3. Roller needle bearing4. Needle roller and cage assembly.

Stamped outer ring needle roller clutch, commonly known as one-way bearing or one-way needle roller bearing,  is a single directional bearing composed of a thin-walled outer ring, cage, spring plate,  and needle roller that is stretched from an alloy sheet. It can be used as a converter, check device,  and overrunning clutch, and is widely used in fitness equipment, cash counting machines, washing machines,  fishing gear, toy cars, and other transmission parts that need to have a reverse stop function.

One of the biggest features of the needle roller bearing is the design of the needle roller. The needle roller has a smaller diameter than other types of rolling elements, so it can achieve a higher load carrying capacity in a limited space.

As a NSK bearing supplier,We offer a full range of NSK brand products at competitive prices, including high quality needle roller bearings, crossed roller bearings, thrust bearings, roller bearings, ball bearing linear motion rolling guides, roller rolling guides, linear motion rolling guides, precision positioning tables and machine parts. Our NSK bearing manufacturing workshop is constantly producing. Therefore, most types of nsk bearing products can be delivered within 3-7 days.NSK Deep Groove Ball BearingsNSK manufactures a full range of Deep Groove Ball Bearings (DGBB).

Inch taper/tapered roller bearings belong to separable bearing, as the outer ring, also called cup, is separable and easy for assembly.

We offer a full range of FYH branded products at very competitive prices. FYH produces about 700 types of standard bearings and 300 types of housings.

Axial (Thrust) needle roller bearings are units comprising axial needle rollers and cage assemblies and axial bearing washers with a centring spigot. Axial (Thrust) needle roller bearings are able to accommodate heavy axial loads. They are insensitive to shock loads and provide a high degree of bearing units stiffness within a minimum axial space. They represent unidirectional bearings and can accommodate axial loads acting in one direction only.Using axial (thrust) needle roller bearings, it is possible to make compact bearing units.

Product Description:The 5052 Aluminum Pipe is a medium-strength alloy with exceptional fatigue strength and good plasticity, making it an ideal choice for a variety of applications where both strength and corrosion resistance are paramount.

Product Description:1.25mm ft galvanized roof panels are suitable for swimming pools and spas, school and hospital logistics buildings, hospital laundry rooms and other buildings, where more heat and water vapor are generated.