Axial Ball Bearing-manufacture,factory,supplier from China

Advantage of 7020C BearingWhen using the bearing, pay attention to make the raceway on one side without ball loading notch bear the main load.The locking port of this kind of bearing is on the outer ring.Generally, the inner and outer rings cannot be separated, and can bear the combined radial and axial load and the axial load in one direction.The ability to bear axial load is determined by the contact angle.The larger the contact angle, the higher the ability to bear axial load.Angular contact ball bearings are mainly divided into single row angular contact ball bearings and double row angula

Double row angular contact ball bearings correspond, in their design and operation, to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis, which means that they are designed to accommodate combined loads, i.e. simultaneously supporting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.

Advantage of 51118 BearingApplication scope of thrust ball bearing:It is only applicable to the parts bearing one side of axial load and low speed, such as crane hook, vertical water pump, vertical centrifuge, Jack, low-speed reducer, etc.The shaft ring, seat ring and rolling element of the bearing are separated and can be installed and disassembled separately.TypeIn addition, the bearing can bear axial load, but can not bear radial load.Composition of thrust ball bearing: the thrust ball bearing is composed of seat ring, shaft ring and steel ball cage assembly.

Angular contact ball bearing has high limit rotational speed, they can carry radial load and axial load simultaneously, they can also withstand purely radial load. The axial load carrying capacity depends on the magnitude of contact angle and increases with increasing contact angle. Since the rigidity of single-row angular contact ball bearings can be increased by preloading, they are often used in the main spindles of machine tools, for which high running accuracy is required.Single row angular contact ball bearings can carry axial load acting in one direction only.

The bidirectional thrust ball bearing is composed of an inner and outer sphere, a steel ball and a cage. The inner and outer spheres are spherical, the steel balls are distributed between the two spheres, and the cage is used to maintain the spacing and distribution of the steel balls. When stressed, the inner ring and the outer ring bear axial and radial forces respectively, and the steel ball transfers force by rolling.

High Rigidity and Stability: miniature angular contact bearings maintain their shape and rigidity when subjected to heavy loads, contributing to enhanced system stability and reduced risk of deformation.Optimized Lubrication Performance: They possess exceptional lubrication characteristics, reducing friction and wear between components, thus extending the bearing's lifespan and ensuring smooth operation.Versatility in Applications: axial angular contact ball bearing are adaptable to various environmental conditions, temperatures, and work environments, making them suitable for a wide range

BE=Single Row Angular Contact Ball Bearing With A 40° Contact Angle And Optimized Internal Design. CB=Bearing For Universal Matching. Two Bearings Arranged Back-To-Back Or Face-To-Face Will Have A Normal Axial Internal Clearance Before Mounting. M=Machined Window-Type Brass Cage, Ball Centered, Different Designs Are Identified By A Figure, e.g.

The unidirectional thrust ball bearing comprises a shaft ring, a seat ring and a ball-cage assembly. It can be separated and the shaft ring, seat ring, ball-cage assembly can be installed separately. Unidirectional thrust ball bearings can withstand the axial load in a single direction and can be positioned in a single direction, but must not bear any radial load.The 51130 belongs to the single direction thrust ball bearings, also called ball thrust bearings or axial deep groove ball bearings. These bearings consist of a shaft ring, a housing ring and a ball and cage assembly.

The ball screw pair has the characteristics of high precision, reversibility and high efficiency, which is the further extension and development of the ladder screw, and the important significance of this development is to change the sliding action of the ladder screw into a rolling action.

Deep groove ball bearings are the most commonly used rolling bearings. Its structure is simple and easy to use. It is mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has a certain angular contact ball bearing performance and can bear the combined radial and axial load.

The insulated bearing adopts a special spraying process to spray high-quality coating on the outer surface of the bearing. The coating has strong adhesion to the substrate and good insulation performance, which can avoid the electric corrosion of the bearing by the induced current, prevent the damage of the current to the grease, the rolling element and the raceway, and improve the service life of the bearing. The process is constantly improving. In insulated bearings, the outer ring or inner ring surface has a layer of 100μm thick coating, which can withstand voltages up to 1000V DC.

Product Description:It is used to manufacture the frame of shading facilities such as building sunshades and shutters.

Cross roller bearing is a special kind of rolling bearing, which is widely used in mechanical field. It is designed to meet large size equipment that needs to operate under the requirements of high load capacity, high rigidity and high rotational accuracy. The cross roller bearing is composed of inner and outer rings, rollers, sealing rings and cages, and its structural advantages are that it can withstand both radial and axial loads, with high torque rigidity and running accuracy. The following will introduce the characteristics and applications of cross roller bearings in detail.

Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations that can withstand heavy loads and vibration loads without difficulty. Such bearings can withstand large axial loads in a single direction, but they cannot withstand radial loads, and they have no automatic aligning capability.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

Combined needle roller bearings, a special type of bearing, can be added between the inner and outer rings of the needle roller components to achieve balance accuracy, reduce vibration and noise effects.

Mainly bear a large unidirectional axial load, the greater the contact Angle, the greater the load bearing capacity. The cage material is steel plate, brass or engineering plastic, and the forming method is stamping or turning, depending on the bearing form or use conditions.

NSK automotive hub bearing is a key component used to support the rotation of automotive wheels. It uses high-quality bearing steel materials and advanced manufacturing processes to ensure the durability and performance stability of the bearing. NSK automotive hub bearings are usually composed of inner and outer rings, bearing balls (rollers), cages, sealing rings, etc. They can withstand the weight of the vehicle, reduce friction, improve rotation efficiency, and resist vibration and impact forces to ensure safety and stability when the vehicle is running.

IKO's needle roller bearings have high bearing capacity and fatigue resistance, can run stably for a long time, extend the service life of the equipment, reduce the frequency of maintenance and replacement of bearings, reduce the maintenance cost of the equipment, and improve the reliability and stability of the equipment.IKO's needle roller bearings are widely used in various industrial equipment and mechanical devices, such as automobile engines, aircraft engines, high-speed trains, construction machinery, agricultural machinery and other fields.

Inner and outer ring design: The internal and outer rings of the insulated bearing are made of insulating substances or different treatment, so that the modern-day interior the bearing can now not be carried out via the internal and outer rings, so as to reap the impact of electrical insulation.Seal design: The seal format of the insulated bearing is strict, which can efficaciously forestall the infiltration of exterior media and preserve the insulati

Linear motion bearings have the characterized of smooth movement,low friction,high rigidity and long life span,economical and easy to maintain or replaceMotorized linear slides such as machine slides, XY tables, roller tables and some dovetail slides are bearings moved by drive mechanisms. Not all linear slides are motorized, and non-motorized dovetail slides, ball bearing slides and roller slides provide low-friction linear movement for equipment powered by inertia or by hand.

Product Description:There are various kinds of color coated steel coil coatings, common polyester (PE), silicon modified polyester (SMP), high durability polyester (HDP) and polyvinylidene fluoride (PVDF) and so on.

Product Description:It is used in key components such as body structure and bogie of high-speed train. The high strength and good fatigue resistance of 7A04 and 7050 aluminum alloy can ensure the stability and safety of the train body when high-speed trains are confronted with huge air resistance, vibration and complex mechanical loads generated by high-speed running.