alumiweld rods-manufacture,factory,supplier from China

Product Description:6063 Aluminum rods are used to make electronic equipment housing frames, radiators and other components.

Product Description:1060 aluminum rods are used in automobile body structural parts, engine parts, radiators, air conditioning system components, body decoration strips and so on.

Product Description:As a raw material for manufacturing shaft, rod, bracket and other mechanical parts. The mechanical properties of 6005 aluminum rods, including strength, hardness and toughness, can meet most machining requirements.

Product Description:Hot-rolled carbon steel coils are made by rolling billets at high temperatures (usually heated to around 1000-1250 °C). Widely used in the manufacture of various mechanical parts, such as shafts, gears, connecting rods and so on.

Product Description:In some high-performance automotive components, such as suspension system components for high-performance sports cars or off-road vehicles, chassis reinforcement, etc., 5456 aluminum rods can be used in manufacturing.

We are IKO bearing distributors，we offer a full range of IKO Bearings at very competitive prices, including high quality IKO needle bearing, crossed roller bearings, thrust bearings, roller bearings, ball linear motion rolling guides, roller rolling guides, linear motion rolling guides , precision positioning tables and mechanical parts. Most products can be shipped same or next day.IKO needle roller bearings can be roughly divided into radial bearings and thrust bearings according to the direction of the load they can withstand.

Railway bearings play a key role in the railway transportation system, mainly in the following aspects:1. Bear and transfer loadsRailway bearings can withstand the axle load of the train, and ensure the stability of the track during the operation of the train by distributing the load pressure. They are able to accept loads of hundreds of tons on EMUs or locomotives and transfer them to the tracks, reducing wear on the tracks and other vehicles.2.

Double-row tapered roller bearings are usually used in applications that require large loads and high-speed rotation, such as wind turbines, metallurgical equipment, rolling mills and heavy machinery, etc.

In order to ensure the normal operation of NACHl's self-aligning roller bearings and extend their service life, proper installation and maintenance are required:When installing, pay attention to the alignment of bearings and axial centripetal to avoid bearing damage caused by tilt and excessive load.Regularly check the lubrication status of bearings, maintain proper lubrication grease, ensure normal lubrication of bearings, reduce friction and wear.Regularly clean the outer surface of the bearing and the surrounding environment to avoid dust and impurities entering the bearing interior, af

Forklift Mast Roller Bearing Precautions1, To keep the forklift bearing its surroundings clean Even if the the invisible smile dust into the forklift bearings will increase bearing wear, vibration and noise.2, Using the installation to be carefully Not allow powerful punch forklift bearing, does not allow a direct hit with a hammer, and not allowed to pass through the rolling pressure.3, The use of appropriate, accurate installation tools To make use of a special tool, and tried to avoid using something like cloth and short fiber.4,To prevent the corrosion of forklift bearings Handle forklift

Product Description:The 2024-T3 Aluminum Pipe is a heat-treatable alloy known for its high strength, excellent workability, and moderate corrosion resistance.

Hub bearing unit ball bearing is developed on the basis of standard angular contact ball bearings and tapered roller bearings, it will be two sets of bearings as one, with good assembly performance, can be omitted clearance adjustment, light weight, compact structure, large load capacity, for sealing bearings can be loaded in advance grease, omit the external hub seal and free from maintenance and other advantages, has been widely used in cars, There is also a trend of gradual expansion of applications in heavy-duty vehicles.1.

 If the bearing seat is equipped with neutron control, pay attention to absolutely prohibit the joint phenomenon of the signal line between the die casting machine and the bearing seat, the reason is clear, in daily production, it is difficult to avoid water on the signal line, or the place where the joint is wrapped is easy to break, resulting in short contact with the machine tool, if the signal is wrong, the light alarm automatic shutdown delay time, the heavy signal disorder, Break the bearing seat. Cause unnecessary loss.

High quality: UBC bearings are made of excessive first-rate substances and have passed through strict satisfactory manage and checking out to make certain reliable product quality.High precision: UBC bearings use superior manufacturing science and precision machining technology, with particular measurement and excessive accuracy, to make certain steady performance.Strong durability: UBC bearings have exceptional put on resistance and corrosion resista

Product Description:Q355B is widely used in high-rise buildings, long-span building structural frames, such as steel beams, steel columns, etc., because its high strength can effectively reduce the cross-section size of structural members. While meeting the requirements of structural strength and stability, it can reduce the building's self-weight and improve the utilization rate of building space.

Linear motion bearing is a linear motion system produced at a low cost for use with unlimited travel and cylindrical shafts. Because the bearing ball is in point contact with the shaft, the load is small. The steel ball rotates with very little friction resistance, thus achieving smooth motion with high precision. Linear motion bearing metric and Imperial series: Standard type (LM/LME/LMB... UU), adjustable (LM/LME... UUAJ), Open (LM/LME... UUOP); Extended (LM/LME... LUU); Flange type (LMF/LMK/LMH... UU, LMEF/LMEK... UU), flange extension (LMF/LMK/LMH... LUU, LMEF/LMEK...

One of the largest aspects of the needle curler bearing is the sketch of the needle roller. The needle roller has a smaller diameter than different sorts of rolling elements, so it can obtain a greater load carrying capability in a constrained space.

Truck bearings are an important automobile component, mainly used to support the weight of the vehicle and keep the tire connected to the chassis of the vehicle. The following are the main components of truck bearings:Outer ring: The outer ring is the outer metal ring of the bearing, usually made of steel or other metal. The outer ring is responsible for bearing the external weight and force, and supports and stabilizes the vehicle by connecting to the vehicle chassis.Inner ring: The inner ring is the inner metal ring of the bearing, usually also made of steel or other metal.

Construction machinery bearings are widely used in various products. The following are some common construction machinery products and their bearing applications:Excavators: Excavators are heavy construction machinery used to excavate earth, stone or other materials, which cover a variety of working conditions and load requirements. Roller bearings or plain bearings that work at high loads and high speeds are usually used on excavators.Bulldozers: Bulldozers are used to bulldoze land, fill earth or push other materials, and need to withstand a large pushing force.

FAG is one of the world's leading bearing manufacturers, whose deep groove ball bearings are widely used in various mechanical equipment and industrial fields. Deep groove ball bearing is a common rolling bearing, with many advantages, such as large bearing capacity, low friction, high speed characteristics.

Product Description:Aluminum plate For some industrial products with high moisture and oxidation requirements, such as precision mechanical parts, electronic products, etc., can be packaged with aluminum plate.

We are an authorized dealer of NACHI bearings. We can provide most of the bearing products in NACHI bearing catalogue. We offer a full line of NACHI products including Ball Bearings, Self-Aligning Bearings, Angular Contact Bearings, Cylindrical Bearings, Needle Roller Bearings and Spherical Bearings at very competitive prices for same day or next day delivery.NACHI Cylindrical Roller BearingsThe structure of cylindrical roller bearings is the simplest of all radial roller bearings, whose inner ring, outer ring and rollers are in line contact, with a large radial load capacity.

RU cross roller bearings are also known as bearings. The main body of a rolling body usually uses cylindrical or tapered rollers to intersect a single flow path, separated by retainers or spacers, and arranged in a cross pattern. Therefore, the cross roller ring group can withstand loads in all directions, with a stiffness of 3-4 times higher than traditional models. RU cross roller bearing is lubricated by spray. Drilled shrinkage air mixes spray and lubricating oil to produce oil mist.

The hub bearing unit is developed on the basis of standard angular contact ball bearings and tapered roller bearings. It combines two sets of bearings into one, with good assembly performance, clearance adjustment can be omitted, light weight, compact structure, and high load capacity. Large, unsealed bearings can be loaded with grease in advance, omit the external hub seal and avoid maintenance, etc., have been widely used in cars, and there is a tendency to gradually expand their application in trucks.