aluminum sheet metal-manufacture,factory,supplier from China

Product Description:5052 aluminum alloy sheet/sheet is used for some non-critical structural components of the car body, such as the door inner plate, the engine hood inner plate, etc.

Product Description:3005 Aluminum plate thickness range is wide, from sheet to thick plate. Thin sheets can be used to manufacture products with thinner thickness requirements, such as barrier layers for food packaging (if they meet food grade standards), shielding layers for electronic devices, etc.

Product Description:Widely used in all sorts of industrial plants, such as metal plants, chemical plants, electronics factories and so on.

Product Description:With its hardness between 440-480HBW, NM480 carbon metal plate can efficaciously withstand friction and put on in working environments with greater extreme wear, such as ore processing, constructing substances transportation and different scenarios, appreciably extending the carrier existence of gear components.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A

Product Description:Corrugated galvanized metal plate has a unique corrugated structure, the common corrugated shapes include V, U, trapezoid and so on.

Product Description: 5086 aluminum plates can be used to make sunshades, awnings and other facilities in buildings.

Product Description:The aluminum sheet is 1/8 inch thick (about 3.175 mm). This thickness gives it a certain degree of robustness, suitable for a variety of applications requiring a certain degree of structural strength. Decorative panels that can be used for building facades can reduce the load of building structures due to their light weight and easy installation.

Product Description:3mm galvanized steel sheet with thickness accuracy of 3mm. This thickness has both strength and lightness, and is suitable for places where weight is limited and structural strength is required, such as light industrial equipment enclosures and interior decorative metal components.

Product Description:Used for indoor ceiling, wall decoration board, etc. Its light weight is easy to install, and the metal texture creates a modern, simple atmosphere in the interior space. It can also be made into a variety of decorative lines, such as top corner line, waist line, etc., to increase the layer of indoor space.

Product Description:3A21 aluminum plate has good heat conduction performance and can effectively transfer heat.

Product Description:Corrugated galvanized iron sheet has a unique corrugated structure, the common corrugated shapes are V-shaped, U-shaped and so on. It can be widely used in outdoor building structures, such as roofs, external walls, fences, etc., extending the service life of buildings and reducing maintenance costs.

Product Description:7050 aluminum plates can be used to manufacture fuselage frames, partitions, etc., to furnish steady assist for the fuselage, minimize the weight of the fuselage whilst making sure structural strength, and assist enhance the gasoline economic system and flight overall performance of the aircraft.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T651

Product Description:Usually the use of roll forming process. The galvanized metal plate is progressively pressed into a roof plate form with a positive crest and trough via a sequence of rollers with a precise shape, and the frequent waveforms are corrugated, trapezoid and so on.

Product Description:680mm galvanized roofing sheet is an perfect roofing fabric for residential slope amendment tasks or normal slope roofing houses. It can grant precise water resistant impact and shield the indoors of the residence from rain leakage. For some coastal or air air pollution areas, its corrosion resistance can lengthen the provider lifestyles of the roof and minimize the variety of maintenance.

Product Description:2117 aluminum coil is used to manufacture some non-critical structural components of the aircraft, such as some sheet metallic components interior the aircraft, some connecting components that do now not endure excessive power loads, etc., and is additionally generally used in rivets for plane buildingsSpecifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075,

Product Description:There are additionally sure purposes in agricultural equipment (such as slicing components for harvesters), forestry equipment (such as scrapers for wooden conveyors) and different fields, which are used to manufacture components that require put on resistance and sure strength.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A633, JIS G3101-2004, ASTM A678 ASTM A58

Product Description:The high plasticity of the 1A30 aluminum sheet makes it easy to process into complex shaped parts, which can be used to manufacture some parts in the aircraft ventilation system, such as ventilation pipes, vents, etc., to meet the needs of internal ventilation and air circulation of the aircraft.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm or Coil (C)Typesheet/ plate/coil/rollAluminum Grade1000 Seri

Product Description:ST12 Galvanized Sheet, known for its enhanced strength and corrosion resistance, is an industry-standard material designed for durability and reliability in a wide range of applications, including automotive, construction, and manufacturing.Product Manufacturing ProcessChemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → drying → quality inspection → packaging and salesChemical CompositionStandardGradeCSi

Product Description:Manufacture a variety of mechanical structural components, such as machine workbench, robot arms, etc.

Product Description:The surface has a typical checker pattern, which is produced by a special pressing die during the sheet forming process.

Product Description:The channel metal is in groove structure and has correct bending resistance.

Product Description:Because of its electricity and true plasticity, warm rolled low carbon metal coil can face up to quite a number masses in constructing structures, and is extensively used in the building enterprise to make a range of constructing structural parts, such as metal beams, metal columns, roof trusses and so on.

Product Description:Mainly used for constructing buildings with excessive metal overall performance necessities and some massive engineering structural parts, such as:High-rise buildings: Used for key load-bearing elements such as beams and columns in high-rise buildings, which can efficiently raise the weight of constructions and enhance seismic performance.Large-span structure: metal shape components such as large-span stadiums, airports, exhibition centers, etc., can make

Product Description:In some small mechanical equipment, 5454 aluminum alloy Angle can be used to manufacture some non-critical structural parts and connecting parts, such as small brackets, fixture corner structure, etc.