aluminium round bar-manufacture,factory,supplier from China

(1)Linear motion bearing is a kind of low-cost metal for producing linear motion system, which is used for infinite stroke cylindrical shaft.. Because point contact ball bearing with shaft, so using the load is small.  (2) the flange linear bearing can be divided into: round flange type, method type, elliptical flange type, guided round flange, guiding method, guide the elliptical flange type, extended round flange type.(3)According to the specification is divided into two series of LM and LME series.

Agricultural bearings are used in conveyors, lawn mowers, combines, hay balers, planters/grain drills, augers, cotton strippers, and more.  They are designed to stand up to extreme conditions and loads.  There are many different designs available.  Their basic components are inner and outer rings, balls, and retainers.  The inner race can be round, square, or hex, and the outer race can be either cylindrical or spherical.  Most agricultural bearings are sealed on both sides with single, double, or triple lip.New domestic modelsOld domestic modelInner diameter (mm)Outer

The outer diameter (OD) of the cam follower (stud or yoke) can be the standard cylindrical shape or be crowned. Crowned cam followers are used to keep the load evenly distributed if it deflects or if there is any misalignment between the follower and the followed surface. They are also used in turntable type applications to reduce skidding. Crowned followers can compensate for up to 0.5° of misalignment, while a cylindrical OD can only tolerate 0.06°. The only disadvantage is that they cannot bear as much load because of higher stresses.

Performance characteristics:High load capacity: NTN deep groove ball bearings can withstand large radial and axial loads, suitable for a variety of mechanical equipment working conditions.High speed: the bearing structure is reasonable, the friction is small, can adapt to high-speed operation, to ensure the stability of the machine equipment.Low noise: NTN deep groove ball bearing manufacturing precision, smooth internal processing, smooth running, low noise.Long life: The use of high-quality bearing steel and excellent heat treatment process, with a long service life and good wear resistance.

Product Description:In some of the electromagnetic shielding requirements are not particularly high, but the strength and processing accuracy of the requirements of electronic equipment shell manufacturing, such as small electronic instrument shell, consumer electronic products, etc., 2011 aluminum rod is a good choice.

In the design of truck bearings, the bearing capacity must first be considered. Trucks usually carry a large amount of cargo, so bearings must be able to support the overall weight of the vehicle and withstand the impact caused by uneven roads. In order to improve the bearing capacity, larger sizes, more rolling elements and stronger materials are usually used to manufacture bearings.Second, wear resistance is another important consideration in truck bearing design.

Rolling bearing with seat is a common and widely used in various mechanical equipment bearings, which support and transmit rotating motion through rolling elements, with high load capacity and stability. Below I will describe in detail the structure, working principle and application areas of rolling bearings with seats, hoping to help you better understand this knowledge.A rolling bearing with seat is usually composed of several basic parts, such as an inner ring, an outer ring, a rolling element (such as a steel ball, roller, etc.) and a cage.

Features: Railway bearings have the characteristics of high bearing capacity, wear resistance, impact resistance, high temperature resistance, long life and so on.

Product Description:The S235J0 carbon steel coil can be used to manufacture pipes for transporting liquids or gases. By crimping and welding processes, the coils can be made into pipes of different diameters and wall thicknesses. It is widely used in water supply and drainage system, low pressure gas transmission system and other fields.

Product Description:PVDF steel coil can withstand the test of many years of ultraviolet radiation, drastic temperature changes, wind and rain erosion and other natural factors. When used as roofing materials, it provides excellent water resistance, sun protection and corrosion resistance.

The structure of one-way thrust ball bearing is relatively simple, mainly composed of outer ring, inner ring, steel ball, cage and cover.The outer ring is the outermost part of the thrust ball bearing, usually made of steel material. The inner ring is located inside the outer ring, and the gap between the outer ring is the movement space of the steel ball. The steel ball is the key component connecting the outer ring and the inner ring, which can provide the function of carrying the thrust load.

Angular contact ball bearings are of a non-separation design, and the shoulders on both sides of the inner and outer rings are not high or low. In order to increase the load capacity of the bearing, the shoulder on one side is machined lower, so that the bearing can fit more steel balls.Single row angular contact ball bearings can only withstand one direction of the axial load, in the radial load, will cause additional axial force, must apply the corresponding reverse load, therefore, this kind of bearings are generally used in pairs.

Product Description:The thickness specifications of CSB galvanized steel coil are diverse, and the thinner thickness is suitable for some products that are more sensitive to weight and cost and do not need to bear too much pressure, such as internal shielding covers of electronic equipment, small packaging boxes, etc.

Inner and outer ring design: The internal and outer rings of the insulated bearing are made of insulating substances or different treatment, so that the modern-day interior the bearing can now not be carried out via the internal and outer rings, so as to reap the impact of electrical insulation.Seal design: The seal format of the insulated bearing is strict, which can efficaciously forestall the infiltration of exterior media and preserve the insulati

Double-row tapered roller bearings are usually used in applications that require large loads and high-speed rotation, such as wind turbines, metallurgical equipment, rolling mills and heavy machinery, etc.

Product Description:Q235 carbon steel is one of the most commonly used materials in building structures. It can be used to make main load-bearing structural components such as beams and columns of buildings. Its strength can withstand the building's own weight and external loads, such as wind and earthquake forces.

Product Description:In automation equipment, such as the shell of the robot, the panel of the industrial automation control cabinet, etc., the application of 3003 aluminum alloy coil can improve the beauty and durability of the equipment, while reducing the overall weight of the equipment, and facilitate the installation and movement of the equipment.Specifications of Aluminum CoilProducts NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021TemperF, O, HMOQ5T for customized, 2T f

A single row angular contact bearing is a common type of bearing, usually consisting of an inner ring, an outer ring, a retainer and a rolling element. It is designed so that the bearing can withstand radial, axial or combined loads when rolling.

The structure of Koyo tapered roller bearings mainly includes an outer ring, an inner ring, a rolling body (roller) and a cage. The rolling element is located between the inner ring and the outer ring and is kept in the specified axial position by the cage. The contact Angle between the inner ring and the outer ring is generally between 10° and 30°, and different contact angles will affect the bearing capacity and speed limit.

The sealing and protection of truck bearings are also very important. Trucks often drive in a variety of harsh road conditions, bearing in dust, water vapor and chemicals and other corrosive environment. In order to extend the life of the bearing, it is necessary to take into account the sealing property in the design, and select the appropriate sealing material and structure.Truck bearings also have certain requirements on installation and maintenance. Proper installation and proper lubrication are the keys to ensure the normal operation of truck bearings.

The outer ring of the needle roller bearing is precisely stamped with thin steel plate, which has small structural space and large load capacity. It is suitable for occasions where installation space is limited and housing holes are not suitable for raceway.

Product Description:6063 Aluminum rods are used to make electronic equipment housing frames, radiators and other components.

Tapered roller bearings are a type of bearing widely used in industrial fields. In the industry, tapered roller bearings are mainly used in machinery and automobiles, such as pharmaceutical equipment, hydraulic machinery, machine tools, automotive differentials, etc. These mechanical equipment are used in a mix of dynamic and static loads, there are different friction factors in the environment.

A flange bearing is a bearing widely used in industrial machinery, which has a flange (usually circular) to be fixed in the mechanical equipment. The flange bearing consists of an inner ring, an outer ring, a rolling element (such as a steel ball, roller, roller, etc.), a cage and a seal.First of all, the inner ring and the outer ring are the main bearing parts of the flange bearing, they are usually made of high-quality steel, after a good heat treatment process to ensure their hardness and wear resistance.