aluminium metal sheet price-manufacture,factory,supplier from China

Product Description:Widely used in all sorts of industrial plants, such as metal plants, chemical plants, electronics factories and so on.

Product Description:With its hardness between 440-480HBW, NM480 carbon metal plate can efficaciously withstand friction and put on in working environments with greater extreme wear, such as ore processing, constructing substances transportation and different scenarios, appreciably extending the carrier existence of gear components.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A

Product Description:5052 aluminum alloy sheet/sheet is used for some non-critical structural components of the car body, such as the door inner plate, the engine hood inner plate, etc.

Product Description:Corrugated galvanized metal plate has a unique corrugated structure, the common corrugated shapes include V, U, trapezoid and so on.

Product Description:Can be used to manufacture high-speed train body structure parts, luggage racks and so on.

Product Description:The density of aluminum is about one-third of that of steel, and the same volume of aluminum profiles is lighter in weight, easy to handle, install and use, and has obvious advantages in some areas with strict requirements for weight, such as aerospace and automobile manufacturing.Alloy Grade & ConditionThermal Expansion Coefficient (20 - 100℃) [μm/m·k]Melting Range [℃]Electrical Conductivity at 20℃ (%IACS)Resistivity at 20℃ [Ωmm²/m]Density at 20℃ [g/cm³]2024 - T35123.2500 - 635300.0582.825052 - H11223.8607 - 650350.0502.725083 - H11223.4570 - 640290.0592.726061 - T6512

Product Description:3mm galvanized steel sheet with thickness accuracy of 3mm. This thickness has both strength and lightness, and is suitable for places where weight is limited and structural strength is required, such as light industrial equipment enclosures and interior decorative metal components.

Product Description:The corrosion resistance of 5082 aluminum profile makes it very suitable for the manufacture of ship hull structures, such as ship plates, keels and other components.

Product Description:Usually the use of roll forming process. The galvanized metal plate is progressively pressed into a roof plate form with a positive crest and trough via a sequence of rollers with a precise shape, and the frequent waveforms are corrugated, trapezoid and so on.

Product Description:For example, the swing arm, connecting rod and other chassis parts of the suspension system, the use of 7A05 aluminum alloy profiles can reduce the sprung mass, improve the handling performance and driving comfort of the car, and its high strength can also ensure the reliability of the chassis parts in complex road conditions.Alloy Grade & ConditionThermal Expansion Coefficient (20 - 100℃) [μm/m·k]Melting Range [℃]Electrical Conductivity at 20℃ (%IACS)Resistivity at 20℃ [Ωmm²/m]Density at 20℃ [g/cm³]2024 - T35123.2500 - 635300.0582.825052 - H11223.8607 - 650350.0502.725

Product Description:680mm galvanized roofing sheet is an perfect roofing fabric for residential slope amendment tasks or normal slope roofing houses. It can grant precise water resistant impact and shield the indoors of the residence from rain leakage. For some coastal or air air pollution areas, its corrosion resistance can lengthen the provider lifestyles of the roof and minimize the variety of maintenance.

Product Description:Corrugated galvanized iron sheet has a unique corrugated structure, the common corrugated shapes are V-shaped, U-shaped and so on. It can be widely used in outdoor building structures, such as roofs, external walls, fences, etc., extending the service life of buildings and reducing maintenance costs.

Product Description:3005 Aluminum plate thickness range is wide, from sheet to thick plate. Thin sheets can be used to manufacture products with thinner thickness requirements, such as barrier layers for food packaging (if they meet food grade standards), shielding layers for electronic devices, etc.

Product Description:There are additionally sure purposes in agricultural equipment (such as slicing components for harvesters), forestry equipment (such as scrapers for wooden conveyors) and different fields, which are used to manufacture components that require put on resistance and sure strength.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A633, JIS G3101-2004, ASTM A678 ASTM A58

Product Description:ST12 Galvanized Sheet, known for its enhanced strength and corrosion resistance, is an industry-standard material designed for durability and reliability in a wide range of applications, including automotive, construction, and manufacturing.Product Manufacturing ProcessChemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → drying → quality inspection → packaging and salesChemical CompositionStandardGradeCSi

Product Description:The surface has a typical checker pattern, which is produced by a special pressing die during the sheet forming process.

Product Description:The channel metal is in groove structure and has correct bending resistance.

Product Description:NM4500 carbon metal plate in cranes, excavators, loaders and different equipment, can be used as wear-resistant lining plate, bucket plate and different components, improve the put on resistance and provider existence of equipment, minimize protection costs.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A633, JIS G3101-2004, ASTM A678 ASTM A588, ASTM A242,etcMaterialA36,SS400,A283  

Product Description:Because of its electricity and true plasticity, warm rolled low carbon metal coil can face up to quite a number masses in constructing structures, and is extensively used in the building enterprise to make a range of constructing structural parts, such as metal beams, metal columns, roof trusses and so on.

Product Description:Mainly used for constructing buildings with excessive metal overall performance necessities and some massive engineering structural parts, such as:High-rise buildings: Used for key load-bearing elements such as beams and columns in high-rise buildings, which can efficiently raise the weight of constructions and enhance seismic performance.Large-span structure: metal shape components such as large-span stadiums, airports, exhibition centers, etc., can make

Product Description:Used for indoor ceiling, wall decoration board, etc. Its light weight is easy to install, and the metal texture creates a modern, simple atmosphere in the interior space. It can also be made into a variety of decorative lines, such as top corner line, waist line, etc., to increase the layer of indoor space.

Product Description:1145 aluminum plate has good electrical conductivity and electromagnetic shielding performance, can be used to make electronic equipment shell, such as computer chassis, mobile phone shell, etc., can protect the internal electronic components, but also effectively prevent electromagnetic interference, improve the stability and performance of the equipment.Thickness0.15-600mmStandardGB, JIS, DIN, ASTMWidth≦2600mmTemperO/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETCLength≦16000mm 

Product Description:NM4500 carbon metal plate is a form of excessive power exceptional metal plate with great put on resistance, which is commonly used in the manufacture of wear-resistant components and wear-resistant structural parts.

Product Description:In the physique body and aid shape of mining gear such as crusher and ball mill, it resists the influence pressure of ore and the vibration of the gear itself to make certain the secure operation of mining machinery.country of originChinaWhether alloynon-alloyDelivery date8-14 daysbrandXINDONGYUmodelAngle SteelapplicationRoof beams, bridges, transmission towers, etc.Processing servicesBending, welding, punching, uncoiling, cuttingProduct nameAngle steelMaterialQ235B/Q355B/SS400/SS490/ST52/Q