alu rod-manufacture,factory,supplier from China

Product Description:5A06 aluminum rod has good thermal conductivity and can be used to manufacture heat sinks for electronic devices, such as computer CPU heat sinks and heat sinks for high-power electronic devices.

Product Description:Because the 4104 aluminum rod has good thermal conductivity, it can be used to manufacture radiators for electronic equipment, such as computer graphics card radiators, server radiators, etc.

Product Description:Because the 1050 aluminum rod has good corrosion resistance, especially in some weakly acidic and weakly alkaline food processing environments, such as some non-critical parts of dairy processing equipment (such as pipe brackets, shells of mixing equipment, etc.), and conveying parts of beverage production equipment.

Product Description:3003 aluminum rod is the main material of building doors and Windows, curtain wall frame. Its good corrosion resistance and machinability make the doors and Windows and curtain walls produced not only beautiful, but also durable.

Product Description:6201 aluminum Angle rod can be used to manufacture some parts that have requirements for strength and conductivity, such as the support of the motor, the frame of the electrical control cabinet, etc.

Product Description:In some of the electromagnetic shielding requirements are not particularly high, but the strength and processing accuracy of the requirements of electronic equipment shell manufacturing, such as small electronic instrument shell, consumer electronic products, etc., 2011 aluminum rod is a good choice.

Product Description:As a raw material for manufacturing shaft, rod, bracket and other mechanical parts. The mechanical properties of 6005 aluminum rods, including strength, hardness and toughness, can meet most machining requirements.

Product Description:It is used to manufacture the frame of shading facilities such as building sunshades and shutters.

Product Description:In interior decoration, it can be used to make decorative strips, partitions, screens and so on. Its diverse cross-section shapes and processing methods can create a rich decorative effect.

Product Description:1060 aluminum rods are used in automobile body structural parts, engine parts, radiators, air conditioning system components, body decoration strips and so on.

Product Description:6063 Aluminum rods are used to make electronic equipment housing frames, radiators and other components.

Product Description:In some high-performance automotive components, such as suspension system components for high-performance sports cars or off-road vehicles, chassis reinforcement, etc., 5456 aluminum rods can be used in manufacturing.

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

The outer ring of the needle roller bearing is precisely stamped with thin steel plate, which has small structural space and large load capacity. It is suitable for occasions where installation space is limited and housing holes are not suitable for raceway.

In rolling bearings, the bearing ring is separated by a rolling unit (rolling element), and in slide guidance systems, the movable part slides on a static guide rail or shaft. Depending on the type of track system, the sliding layer is on movable or rigid components. The lubricating oil is embedded in the sliding layer to achieve lubrication. INA linear plain bearing is a linear positioning bearing with infinite stroke length.

Even if the production of the motor is strictly controlled during the manufacturing process, it is difficult to completely avoid the magnetic asymmetry of the armature and rotor. This asymmetry creates a voltage between the stators, which creates a current through the bearings, especially in AC motors. This current will cause corrosion pits, melting marks, electrical corrosion file lines and discoloration, wear and other damage on the bearing raceway and rolling surface.

Product Description:The S275 carbon steel coil is made of rolled steel. This roll form is easy to store and transport and takes up relatively little space.

In general, the rotary support bearing is an indispensable part of modern mechanical equipment, and its stability, reliability and life directly affect the operating efficiency and safety of the equipment. Therefore, in the process of engineering design and use, it is necessary to attach great importance to the selection, installation and maintenance of rotary support bearings to ensure the normal operation of the equipment and extend the service life.

Product Description:As a mold material, 7075 aluminum alloy coil can be used to manufacture high-precision, high-strength die-casting molds, injection molds, etc.

Product Description:DX52D+Z Galvanized Steel Plate is a premium-grade steel product that combines the strength of cold-rolled steel with the protective properties of zinc coating. This high-performance material is engineered for applications demanding both structural integrity and resistance to corrosion.

The unidirectional thrust ball bearing comprises a shaft ring, a seat ring and a ball-cage assembly. It can be separated and the shaft ring, seat ring, ball-cage assembly can be installed separately. Unidirectional thrust ball bearings can withstand the axial load in a single direction and can be positioned in a single direction, but must not bear any radial load.The 51130 belongs to the single direction thrust ball bearings, also called ball thrust bearings or axial deep groove ball bearings. These bearings consist of a shaft ring, a housing ring and a ball and cage assembly.

The sliding bearing seat is composed of an upper cover, a base, a split bearing bushing (aluminum bronze) and mounting bolts, which mainly bear radial load. Easy to use, no need to install bearings. The load-free part of the inner surface of the bearing bush is provided with an oil groove, and the lubricating oil flows into the gap through the oil inlet hole and the post groove.

INA bearings schaeffler group is a leading manufacturer of almost all bearing types.We are INA bearing manufacturer and can provide a full range of INA bearings. For example: INA ball bearings,INA cam follower，INA thrust bearing，iINA spherical plain bearings，INA flange bearing，INA banded thrust bearing.The following is a detailed introduction about some INA bearings, if you want to know more, please contact us, we have 24 hours online service.INA Thin Section BearingsINA Thin-walled bearings are high-precision products with low operating noise and high load carrying capacity.

Rotary bearing is an important mechanical component, which is widely used in various industrial equipment and mechanical devices. It bears the radial load, axial load and moment load under the rotating motion, and plays the role of support and rotation. The following will introduce the structure, working principle, application field and maintenance of the rotary support bearing in detail.Rotary support bearings are usually composed of an inner ring, an outer ring, a rolling element (ball, roller, etc.) and a cage.