Agricultural Machine Bearing Thrust Roller Bearing 29428-manufacture,factory,supplier from China

Agricultural bearing is a bearing specially used in agricultural machinery and equipment, with the following characteristics:Wear resistance: Agricultural machinery usually works in harsh environments and needs to have high wear resistance and be able to operate stably for a long time.Corrosion resistance: Agricultural machinery is often used in humid, dusty, fertilizer and other environments, bearings need to have a certain corrosion resistance, can maintain good working condition for a long time.Load capacity: Agricultural machinery usually needs to withstand a large load, bearings need to h

Products mainly used in farming machinery include outer spherical ball bearings and housing units, sealed deep groove ball bearings and angular contact ball bearings, tapered roller bearings, hexagonal and square bore bearings, as well as idler and chain drive gear tooth units.The perfect seal design means that the bearing has a significantly longer service life than its peers, even under harsh working conditions. The large capacity of the grease storage space ensures that the sealed bearing does not require any maintenance.

Agricultural machinery does need better sealing performance under polluted conditions to prevent dust, moisture and particles from entering the machinery and affecting normal operation.

Agricultural bearings refer to the bearing products used in agricultural machinery and equipment, which carry the rotating parts of various agricultural equipment in the working process, and ensure its smooth operation and increase the life of mechanical equipment.

Agricultural bearings are used in conveyors, lawn mowers, combines, hay balers, planters/grain drills, augers, cotton strippers, and more.  They are designed to stand up to extreme conditions and loads.  There are many different designs available.  Their basic components are inner and outer rings, balls, and retainers.  The inner race can be round, square, or hex, and the outer race can be either cylindrical or spherical.  Most agricultural bearings are sealed on both sides with single, double, or triple lip.New domestic modelsOld domestic modelInner diameter (mm)Outer

Typical applications include Combine harvesters, balers, seeder, tillage and lawn and garden machinery. This range of bearings for agricultural machinery complements our large stock of housed bearings units.Agricultural Ball Bearings are used in nearly every piece of machinery you see.

Thrust roller bearing is an important mechanical part, which is used to support the axial load acting on the rotating parts. Its use is directly related to the stable operation and life of mechanical equipment, so it should be paid attention to. Advantages of thrust roller bearings The processing technology of thrust roller bearings is very precise, and the production accuracy of its inner ring, outer ring and raceway can reach sub-micron level.

Koyo tapered roller bearings are suitable for applications requiring simultaneous radial and axial loads, such as differential, hub, transmission and other components of automobiles, as well as wind turbines, agricultural machinery, construction machinery and other equipment requiring high load capacity and high rotation accuracy. The selection of suitable Koyo tapered roller bearings can improve the efficiency and reliability of machine equipment, reduce maintenance work and costs, and is an important bearing product widely used in various fields.

Thrust roller bearing is a type of bearing specially designed to bear axial loads, which consists of thrust rollers to provide good support and stability during high-speed rotation. Thrust roller bearings are usually used in parts of mechanical equipment that need to withstand high axial loads, such as gear boxes, turbines, centrifuges, etc.

The working principle of thrust roller bearing is to transmit and bear axial load through the linear movement of thrust roller. When the axial load acts on the bearing, the thrust roller will roll along the slide of the inner and outer rings to realize the load transfer.

In order to improve the tightness of agricultural machinery, you can consider using high-quality seals and sealing materials to ensure that it can resist the effects of pollution and harsh conditions. In addition, ensure that the assembly and alignment of agricultural machinery comply with regulations to reduce the occurrence of oil spills and other problems.

Roller bearings are designed for extremely demanding applications and must support high loads, severe misalignment, environmental pollution, shock and vibration. Due to the highest load rating in the industry and production from factories near you, there is no reason to look for self-aligning roller bearings anywhere else.TypeCylindrical roller thrust bearingTapered roller thrust bearingSelf aligning roller thrust bearingSelf aligning roller thrust bearing is a kind of self-aligning bearing. In use, the maximum allowable shaft deviation is about 2 degrees.

Thrust roller bearings are used to bear axial and radial combined loads dominated by axial loads, but the radial load shall not exceed the axial load55%. Compared with other thrust roller bearings, this kind of bearing has lower friction factor, higher speed and aligning performance.29000, type bearing rod for the asymmetric spherical roller can reduce the relative sliding of the roller and raceway in the roller, and the roller is long, large diameter, the number of rollers, high load capacity, usually using oil lubrication, individual low speed can be grease lubrication.

The structure of the thrust roller bearing is generally composed of an inner and outer ring, a thrust roller, a cage and a sealing ring. The inner and outer rings are annular structures, which are installed on the shaft and the housing to carry the axial load. The thrust roller is cylindrical or conical, arranged between the inner and outer rings, and can effectively withstand and transfer the axial load. The cage is a structure that supports and holds the thrust roller, usually made of steel or copper.

Agricultural FAFNIR Bearing insert bearing 203KRR2 203 RR2 203RR2 are with particularly thick-walled outer rings. In addition to high radial forces, these bearings can also support axial forces in both directions.The outer rings have a crowned or cylindrical outside surface.

Drive pinion: steeply angled tapered roller bearings, which reduce frictional moments and allow for increased rotational speeds.Hub Bearings – Rear Axle: Tapered roller bearings with an optimized internal design to limit edge loads caused by axle deflection and heavy loads.Hub bearing – front axle: Thin angular contact ball bearing improves rigidity in a narrow space.Gearboxes: High performance deep groove ball bearings TMB/TAB for increased service life or downsizing (downsizing) with the same service life as larger bearings.Final reduction planetary gears: There is a large selection of cage

Thrust tapered roller bearings can form a very compact bearing configuration, which can withstand very heavy axial loads, is not sensitive to impact loads, and has good rigidity. LYTBZ produces unidirectional tapered roller bearings and bidirectional tapered roller thrust bearings. The screw fixed bearing constitutes a specially designed unidirectional tapered roller thrust bearing and is filled with rollers.Thrust tapered roller bearing features:This bearing is used for rolling mill screw fixed bearing configuration.

Thrust roller bearings are used to bear axial and radial combined loads based on axial loads, but the radial load shall not exceed 55% of the axial load.

The separation bearing is composed of a racetrack ring, a needle roller and a cage assembly, and can be used in any combination to thin or thick racetrack rings. The non-separable bearing is an integral bearing composed of precision stamped raceway ring, needle roller and cage assembly that can withstand unidirectional axial loads. This bearing occupies a small space, which is conducive to the compact design of the machine.

Applications: Cross roller bearings are widely used in many fields, including machine tools, engineering machinery, medical equipment, food packaging machinery, etc. On machine tools, cross roller bearings are often used to support the spindle and the turntable to ensure the high-speed and high-load operation of the equipment.

Thrust cylindrical roller bearings and thrust roller bearings are suitable for low speed occasions, the thrust tapered roller bearing speed is slightly higher than the thrust cylindrical roller bearing. Bearing knowledgeThrust cylindrical roller bearings are separated bearings and can only withstandThe unidirectional axial load and slight impact can limit the axial displacement of the shaft (or housing) in one direction, so it can be used for unidirectional axial positioning. However, its carrying capacity is much greater than that of thrust ball bearings.

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342

Product Description:Hot-rolled carbon steel coils are made by rolling billets at high temperatures (usually heated to around 1000-1250 °C). Widely used in the manufacture of various mechanical parts, such as shafts, gears, connecting rods and so on.

Product Description:Q235 carbon steel is one of the most commonly used materials in building structures. It can be used to make main load-bearing structural components such as beams and columns of buildings. Its strength can withstand the building's own weight and external loads, such as wind and earthquake forces.