Agricultural Bearing Hex Bore Ball Bearing 2AH06-1-manufacture,factory,supplier from China

Agricultural bearings are used in conveyors, lawn mowers, combines, hay balers, planters/grain drills, augers, cotton strippers, and more.  They are designed to stand up to extreme conditions and loads.  There are many different designs available.  Their basic components are inner and outer rings, balls, and retainers.  The inner race can be round, square, or hex, and the outer race can be either cylindrical or spherical.  Most agricultural bearings are sealed on both sides with single, double, or triple lip.New domestic modelsOld domestic modelInner diameter (mm)Outer

Typical applications include Combine harvesters, balers, seeder, tillage and lawn and garden machinery. This range of bearings for agricultural machinery complements our large stock of housed bearings units.Agricultural Ball Bearings are used in nearly every piece of machinery you see.

Agricultural machinery does need better sealing performance under polluted conditions to prevent dust, moisture and particles from entering the machinery and affecting normal operation.

Agricultural bearing is a bearing specially used in agricultural machinery and equipment, with the following characteristics:Wear resistance: Agricultural machinery usually works in harsh environments and needs to have high wear resistance and be able to operate stably for a long time.Corrosion resistance: Agricultural machinery is often used in humid, dusty, fertilizer and other environments, bearings need to have a certain corrosion resistance, can maintain good working condition for a long time.Load capacity: Agricultural machinery usually needs to withstand a large load, bearings need to h

Agricultural bearings refer to the bearing products used in agricultural machinery and equipment, which carry the rotating parts of various agricultural equipment in the working process, and ensure its smooth operation and increase the life of mechanical equipment.

Products mainly used in farming machinery include outer spherical ball bearings and housing units, sealed deep groove ball bearings and angular contact ball bearings, tapered roller bearings, hexagonal and square bore bearings, as well as idler and chain drive gear tooth units.The perfect seal design means that the bearing has a significantly longer service life than its peers, even under harsh working conditions. The large capacity of the grease storage space ensures that the sealed bearing does not require any maintenance.

In order to improve the tightness of agricultural machinery, you can consider using high-quality seals and sealing materials to ensure that it can resist the effects of pollution and harsh conditions. In addition, ensure that the assembly and alignment of agricultural machinery comply with regulations to reduce the occurrence of oil spills and other problems.

Drive pinion: steeply angled tapered roller bearings, which reduce frictional moments and allow for increased rotational speeds.Hub Bearings – Rear Axle: Tapered roller bearings with an optimized internal design to limit edge loads caused by axle deflection and heavy loads.Hub bearing – front axle: Thin angular contact ball bearing improves rigidity in a narrow space.Gearboxes: High performance deep groove ball bearings TMB/TAB for increased service life or downsizing (downsizing) with the same service life as larger bearings.Final reduction planetary gears: There is a large selection of cage

1. Deep groove ball bearing with dust coverDeep groove ball bearings with dust cover are divided into Z type and 2Z type. When used under environmental conditions where lubrication is difficult or lubricating oil is inconvenient, the bearing interior is usually injected with anti-rust and lubricating dual-purpose lithium based grease, and the lubrication amount is 1/4 to 1/3 of the bearing internal space.2.

Agricultural FAFNIR Bearing insert bearing 203KRR2 203 RR2 203RR2 are with particularly thick-walled outer rings. In addition to high radial forces, these bearings can also support axial forces in both directions.The outer rings have a crowned or cylindrical outside surface.

The standard drive system for stud CAM follower is usually a slot, suitable for flat head screwdrivers. However, for some special cases, such as eccentric CAM follower or where higher torque capacity is required, the socket can also be used in the drive system. The hex socket has a larger contact area and can withstand greater torque, so it is very useful for some applications with higher loads, especially for those that need to be driven in blind holes.

Ball bearing with eccentric locking collar is  outer diameter in spherical surface,internal construction is the same as deep groove ball bearings of 6200 6300 series.they both can sustain radial and axial loads.We can supply full series of UC200,UC300,SA200,SB200,UEL200,UK200,SER200,CS200,UC300 series bearings.Such bearings are often used in severe operating conditions where they are exposed to dirts,moisture and high temperature.thus,insert ball bearing are usually with grease groove and oil hole on outer ring,at suitable time,we need to replace fresh grease to secure full performance an

Thrust ball bearings are produced as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.Thrust ball bearings are separable, the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft washers have a ground bore to enable an interference fit.

Product Description:Precisely 1/4 inch (about 6.35 mm) thick, this thickness gives it a certain degree of structural support and stability in a variety of applications.

Agricultural engineering involves a wide range of machinery, equipment and tools, including tillers, tractors, rake machines, balers and high-power harvesting machinery such as green feed harvesters and combine harvesters. A variety of different mechanical equipment, also need to face the harsh working environment. The dusty conditions in summer have very high requirements for bearing seals. In addition, farming machinery bearings are usually integrated with flanged housings to simplify assembly.

Cam Follower Bearings are additionally referred to as tune follower. They are designed to comply with a sliding or rotating piece (cam) and they use rollers or needles as the rolling elements. Cam Follower Bearings are consequently in a position to replicate a unique action due to the fact they are exceptionally versatile. They have thick-walled outer rings that run on a track.

Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance. This kind of bearing has the advantages of small friction coefficient, high limit speed, simple structure, low manufacturing cost and easy to achieve high manufacturing accuracy.Deep groove ball bearings mainly include the following common types:1. Open deep groove ball bearing2. Deep groove ball bearings with a stop groove in the outer ring3. Deep groove ball bearing with dust cover4.

Deep groove ball bearings are available in a variety of sizes and are the most popular of the rolling bearings. This type of bearing supports radial load and a small degree of axial load in both directions simultaneously. Deep groove ball bearings are popular due to their versatility, affordability, and capability to run at high speeds. Most bearings in the 6000 series up to 60mm bore can be made available in stainless steel (AISI 440C material) upon request. 

IKO's needle roller bearings have high bearing capacity and fatigue resistance, can run stably for a long time, extend the service life of the equipment, reduce the frequency of maintenance and replacement of bearings, reduce the maintenance cost of the equipment, and improve the reliability and stability of the equipment.IKO's needle roller bearings are widely used in various industrial equipment and mechanical devices, such as automobile engines, aircraft engines, high-speed trains, construction machinery, agricultural machinery and other fields.

Product Description:Due to its good molding performance and beautiful metal appearance, the 1/16 inch aluminum plate can be used to manufacture the shell of various electronic devices, such as tablets, laptops, mobile phones, and so on.

The series of products with flanges on the outer wheel make the axial positioning easy; The bearing seat is no longer needed and becomes more economical. In order to obtain low friction torque, high rigidity and good rotation accuracy of bearings, steel balls with small outer diameter are used. The use of hollow shafts ensures lightweight and wiring spaceThe biggest feature is that the flange and the bearing are integrated.

High load carrying capacity    The cage bars are displaced relative to the roller pitch diameter to enable the rollers to be placed closer to each other, creating room for additional rollers  High stiffness    The increased number of rollers increases radial stiffness.    High speed capabilityThe cage designs are suitable for high speeds, rapid accelerations and peak loads.  Long service life  The black oxide coating of rings and rollers (designation suffix L4B) contributes to extended service life by improving:     

It uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each.

The important measure to reduce automobile fuel consumption is to design low friction torque hub bearings, and the main factors affecting the bearing friction torque is the type of bearing and preload, and the bearing seal accounted for a large proportion of the friction torque components. Therefore, improving the seal design to reduce the friction torque can significantly improve the performance of hub bearings.