Ag Bearings-manufacture,factory,supplier from China

Loaders: Loaders are used to load and unload various materials, and their working conditions require the wear and impact resistance of bearings. Cylindrical roller bearings or bi-directional thrust ball bearings that are resistant to high speed work are usually used on loaders.Cranes: Cranes are used to lift and move heavy goods and are required to withstand high tensile and compressive loads.

The selection of appropriate construction machinery bearings is crucial to the performance and life of mechanical equipment. Ensure that the bearing meets the working conditions and load requirements, which can reduce the failure rate and improve the reliability and service life of the equipment. At the same time, regular maintenance, timely replacement of lubricating oil, cleaning and inspection of bearings can extend the life of bearings and reduce the possibility of failure.

We are an authorized ntn bearings distributor. NTN is a leading manufacturer of virtually all bearing types. We canprovide most of the bearing products in NTN bearing catalogue.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

NTN tapered roller bearings are mainly used to bear radial and axial combined loads mainly based on radial loads, with high stiffness and rotation accuracy, and have large bearing capacity and low limit speed compared with angular contact ball bearings. Its carrying capacity depends on the Angle of the raceway of the outer ring, and the greater the Angle, the greater the carrying capacity.

The main uses of conical roller bearings include the following aspects1. Construction machinery field: Conical roller bearings are widely used in all kinds of heavy construction machinery and equipment, such as excavators, loaders, bulldozers, road rollers, cranes, etc. These equipment need to withstand large axial load and radial load, and have high speed and accuracy requirements, cone roller bearings can meet these requirements to ensure the normal operation of the equipment.2.

High quality: UBC bearings are made of excessive first-rate substances and have passed through strict satisfactory manage and checking out to make certain reliable product quality.High precision: UBC bearings use superior manufacturing science and precision machining technology, with particular measurement and excessive accuracy, to make certain steady performance.Strong durability: UBC bearings have exceptional put on resistance and corrosion resista

The different types of cylindrical roller bearings are designated based on their structural features and intended applications: N..EM: Cylindrical roller bearing with a standard inner ring without any ribs, suitable for radial loads. NU..EM: Bearing with aremovable inner ring and two integral flanges on the outer ring, designed for high radial loads and accommodates axialdisplacement. NJ..EM: Features a removable inner ring and one integral flange on the outer ring, primarily used for applicationswhere axial displacement is required.

Double-row tapered roller bearings are usually used in applications that require large loads and high-speed rotation, such as wind turbines, metallurgical equipment, rolling mills and heavy machinery, etc.

Rotary bearing is an important mechanical component, which is widely used in various industrial equipment and mechanical devices. It bears the radial load, axial load and moment load under the rotating motion, and plays the role of support and rotation. The following will introduce the structure, working principle, application field and maintenance of the rotary support bearing in detail.Rotary support bearings are usually composed of an inner ring, an outer ring, a rolling element (ball, roller, etc.) and a cage.

The important measure to reduce automobile fuel consumption is to design low friction torque hub bearings, and the main factors affecting the bearing friction torque is the type of bearing and preload, and the bearing seal accounted for a large proportion of the friction torque components. Therefore, improving the seal design to reduce the friction torque can significantly improve the performance of hub bearings.

During use, CAM bearings need to pay attention to maintenance and maintenance to ensure their normal operation and extend their service life. It is important to keep the camshaft surface clean to avoid dust and impurities entering the bearing parts. Regular oil changes are also essential to maintain good lubrication between the camshaft and the bearing.The role of CAM bearings in the engine is crucial. A high quality CAM bearing can effectively reduce friction and wear, improve engine performance and efficiency.

Deep groove ball bearings are available in a variety of sizes and are the most popular of the rolling bearings. This type of bearing supports radial load and a small degree of axial load in both directions simultaneously. Deep groove ball bearings are popular due to their versatility, affordability, and capability to run at high speeds. Most bearings in the 6000 series up to 60mm bore can be made available in stainless steel (AISI 440C material) upon request. 

Agricultural engineering involves a wide range of machinery, equipment and tools, including tillers, tractors, rake machines, balers and high-power harvesting machinery such as green feed harvesters and combine harvesters. A variety of different mechanical equipment, also need to face the harsh working environment. The dusty conditions in summer have very high requirements for bearing seals. In addition, farming machinery bearings are usually integrated with flanged housings to simplify assembly.

Angular contact ball bearings are of a non-separation design, and the shoulders on both sides of the inner and outer rings are not high or low. In order to increase the load capacity of the bearing, the shoulder on one side is machined lower, so that the bearing can fit more steel balls.Single row angular contact ball bearings can only withstand one direction of the axial load, in the radial load, will cause additional axial force, must apply the corresponding reverse load, therefore, this kind of bearings are generally used in pairs.

The ball screw pair has the characteristics of high precision, reversibility and high efficiency, which is the further extension and development of the ladder screw, and the important significance of this development is to change the sliding action of the ladder screw into a rolling action.

Hub bearing unit ball bearing is developed on the basis of standard angular contact ball bearings and tapered roller bearings, it will be two sets of bearings as one, with good assembly performance, can be omitted clearance adjustment, light weight, compact structure, large load capacity, for sealing bearings can be loaded in advance grease, omit the external hub seal and free from maintenance and other advantages, has been widely used in cars, There is also a trend of gradual expansion of applications in heavy-duty vehicles.1.

Because the bearing ball is in contact with the bearing point, the load is small.

Product Description:The 7075-T6 Aluminum Pipe is a high-strength, heat-treatable alloy known for its exceptional mechanical properties and versatility across demanding industries.

Product Description:SS400 carbon steel can be used for some non-critical structural components of the car body, such as some reinforcement plates and brackets inside the body.

1. Centripetal needle roller and cage assembly (Type K)2, needle roller bearings with double locking rings (NA, NKI, RNA, NK)3. Single row needle roller bearing with double rib on outer ring (NA, NKI, RNA, NK)4, double row needle roller bearings with double guard (NA type, RNA type)5, stamped needle roller bearings (HK type, BK type)Note: This bearing has low cost, large bearing capacity, and is suitable for supporting structures with limited installation size. The journal surface is hardened as a rolling surface, and the bearing is pressed into the seat hole without axial positioning.

Product Description:The base plate of HDG Steel Coil (hot-dip galvanized steel coil) is usually cold-rolled steel sheet or steel strip. HDG steel coil thickness range is wide, generally from 0.3mm-3.0mm between.

1.Cylindrical hole· With two rows of steel balls and a curved raceway in the outer ring, self-aligning ball bearings can be actively aligning· and can accept the point of view error between the shaft and the bearing seat. It is suitable for the working condition that simply shows the shaft deflection and the shaft error caused by different centers· Friction is the lowest of all rolling bearings· has only a small temperature rise even at high rotational speeds.2.

Railway bearings play a key role in the railway transportation system, mainly in the following aspects:1. Bear and transfer loadsRailway bearings can withstand the axle load of the train, and ensure the stability of the track during the operation of the train by distributing the load pressure. They are able to accept loads of hundreds of tons on EMUs or locomotives and transfer them to the tracks, reducing wear on the tracks and other vehicles.2.