801806 bearing-manufacture,factory,supplier from China

Engineering Machinery Bearing have a large carrying capacity and are suitable for supporting structures with limited installation dimensions.The surface of the journal is hardened as the rolling surface, and the bearing is fitted into the seat hole with a press fit, and there is no need for it to be axially positioned.The bearing should be injected with an appropriate amount of grease before installation.Usually, no relubrication is required after assembly (BK type bearings are used in the support of the journal without the protruding end, the end face is closed for sealing, and can withstand

Inner and outer ring design: The inner and outer rings of the insulated bearing are made of insulating materials or special treatment, so that the current inside the bearing can not be conducted through the inner and outer rings, so as to achieve the effect of electrical insulation.Seal design: The seal design of the insulated bearing is strict, which can effectively prevent the infiltration of external media and maintain the insulation performance and stability of the bearing.

Rotary bearing is an important mechanical component used to support and rotate shafts, which is usually used in industrial equipment, ships, automobiles and construction machinery. It is mainly composed of an inner and outer ring, a rolling body and a cage, and realizes the rotation and support of the shaft by rolling between the inner and outer rings of the rolling body. The design and selection of rotary bearing have an important influence on the stability, reliability and operation efficiency of the equipment.

Bearing performance: The bearing capacity of cross roller bearings is large, suitable for high-speed and high-load applications. Due to the special arrangement of rollers, the bearing can share part of the load when bearing radial and axial loads, which improves the bearing capacity and stability.

Hub bearing unit ball bearing is developed on the basis of standard angular contact ball bearings and tapered roller bearings, it will be two sets of bearings as one, with good assembly performance, can be omitted clearance adjustment, light weight, compact structure, large load capacity, for sealing bearings can be loaded in advance grease, omit the external hub seal and free from maintenance and other advantages, has been widely used in cars, There is also a trend of gradual expansion of applications in heavy-duty vehicles.1.

This type of bearing is widely used in industrial automatic robots, working machinery and medical facilities, where high rigidity, tightness and high speed are required to ensure accuracy.

Product Description:DX53D+Z Galvanized Steel Plate, known for its enhanced strength and corrosion resistance, is an industry-standard material designed for durability and reliability in a wide range of applications, including automotive, construction, and manufacturing.Product Manufacturing ProcessChemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → drying → quality inspection → packaging and salesChemical CompositionStandar

Railway bearing is an important component used to support and guide the rotation of railway vehicle axle, which bears the weight of the train and the force generated during operation, and can ensure the smooth operation of the train. Railway bearings play a vital role in railway transportation, and their quality and performance directly affect the safety and efficiency of trains. Railway bearing is an indispensable component in railway transportation, its structure is firm, reliable quality, wear-resistant and durable, to ensure the safety, stability and efficient operation of the train.

Thrust cylindrical roller bearings and thrust roller bearings are suitable for low speed occasions, the thrust tapered roller bearing speed is slightly higher than the thrust cylindrical roller bearing. Bearing knowledgeThrust cylindrical roller bearings are separated bearings and can only withstandThe unidirectional axial load and slight impact can limit the axial displacement of the shaft (or housing) in one direction, so it can be used for unidirectional axial positioning. However, its carrying capacity is much greater than that of thrust ball bearings.

Because the rolling body in the thrust tapered roller bearing is a tapered roller, the rolling surface can form a pure rolling and the limit speed is higher than that of the thrust cylindrical roller bearing because the rolling bus and the raceway bus of the washer converge at a certain point on the axis line of the bearing.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)294169039416801705446813802000–5.9129412903941260130422938542700—2.61294139039413651404534410002500—3.342

Rolling bearing with seat is a common and widely used in various mechanical equipment bearings, which support and transmit rotating motion through rolling elements, with high load capacity and stability. Below I will describe in detail the structure, working principle and application areas of rolling bearings with seats, hoping to help you better understand this knowledge.A rolling bearing with seat is usually composed of several basic parts, such as an inner ring, an outer ring, a rolling element (such as a steel ball, roller, etc.) and a cage.

Sliding bearings are sliding friction, with large contact surface, simple structure, small volume, strong bearing capacity, good vibration resistance, but large friction coefficient, easy to generate heat, need sufficient lubrication, suitable for low speed and heavy loadRolling bearings are rolling friction, compared with sliding bearings, their contact surface is small (point contact for ball bearings, line contact for roller bearings), small friction coefficient, less heat generation; less wear and tear, good accuracy retention; suitable for higher speeds run down.

Product Description:6063 aluminum coils are used in the manufacture of train cars for components such as window frames, door frames, interior armrests and trim strips. Its corrosion resistance can be adapted to the environment of long-term train operation, including different climatic conditions and frequent cleaning operations.

Structure:Internal Structure and Retainer Material VariationC: Symmetrical roller, Stamped Steel retainerCA: Symmetrical roller, one-pice brass cageCTN1: Symmetrical roller, nylon cageE: Third generation design.

THK was founded in 1971 in Meguro-ku, Tokyo, Japan, and was originally named Toho Seiko Co., Ltd. It was later renamed THK CO.,LTD. "THK" stands for "Toughness", "High Quality" and "Know-how".THK linear bearings are a linear motion system produced at low cost for use with cylindrical shafts with unlimited travel. Because the bearing ball is in point contact with the shaft, the load is small.

Product Description:As a raw material for manufacturing shaft, rod, bracket and other mechanical parts. The mechanical properties of 6005 aluminum rods, including strength, hardness and toughness, can meet most machining requirements.

With a focus on extended service life and minimal maintenance, these bearings are equipped with optimized lubrication properties,minimizing friction and wear for seamless, efficient operation across varying temperatures and environments.

Product Description:6063 Aluminum rods are used to make electronic equipment housing frames, radiators and other components.

As a kind of high-quality and reliable auto parts, Koyo automotive hub bearings have superior technical performance and good market reputation. Whether in the automotive manufacturing process or in the after-sales maintenance link, the choice of Koyo bearings can provide customers with reliable support and protection, is an indispensable part of the automotive industry.

Outer spherical bearing with seat is a high-precision component product composed of greased sealed deep groove ball bearings and bearing seats of various shapes.

The outer ring of the needle roller bearing is precisely stamped with thin steel plate, which has small structural space and large load capacity. It is suitable for occasions where installation space is limited and housing holes are not suitable for raceway.

Excavator bearing installation and removal methods, should be according to the excavator bearing structure, size and excavator bearing parts with the nature.Installation, disassembly pressure should be directly added to the end face of tight fit excavator bearing stalls circle, not by the excavator bearing rolling elements to transmit pressure, because this will be caused by the excavator bearing work surface indentation, impact excavator bearing normal workeven make excavator bearing damage.

Trucks are very common tools in the transportation industry, carrying important goods and supplies. Truck bearing is one of its key components, it plays an important role in the vehicle transmission system support and operation. Its quality and running state directly affect the safety and stability of the vehicle.

We offer a full range of FYH branded products at very competitive prices. FYH produces about 700 types of standard bearings and 300 types of housings.