7320 BECBM Single Row Angular Contact Ball Bearing Size 100x215x47mm-manufacture,factory,supplier from China

Single Row Angular Contact BearingsThese single row angular contact bearings are suitable for general use where axial loads are applied in only one direction. They are stand-alone bearings and are not designed to be combined or mated with another bearing.Double Angular Contact BearingsDuplex bearings are two matched bearings that provide precise alignment both radially and axially. By using duplex bearings, vibrations can be eliminated and higher load capacities can be achieved.

BE=Single Row Angular Contact Ball Bearing With A 40° Contact Angle And Optimized Internal Design. CB=Bearing For Universal Matching. Two Bearings Arranged Back-To-Back Or Face-To-Face Will Have A Normal Axial Internal Clearance Before Mounting. M=Machined Window-Type Brass Cage, Ball Centered, Different Designs Are Identified By A Figure, e.g.

Double row angular contact ball bearings correspond, in their design and operation, to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space.

Angular contact ball bearing has high limit rotational speed, they can carry radial load and axial load simultaneously, they can also withstand purely radial load. The axial load carrying capacity depends on the magnitude of contact angle and increases with increasing contact angle. Since the rigidity of single-row angular contact ball bearings can be increased by preloading, they are often used in the main spindles of machine tools, for which high running accuracy is required.Single row angular contact ball bearings can carry axial load acting in one direction only.

Angular contact ball bearing 70000 type, composed of outer ring, inner ring, steel ball, cage.

A single row angular contact bearing is a common type of bearing, usually consisting of an inner ring, an outer ring, a retainer and a rolling element. It is designed so that the bearing can withstand radial, axial or combined loads when rolling.

Advantage of 7020C BearingWhen using the bearing, pay attention to make the raceway on one side without ball loading notch bear the main load.The locking port of this kind of bearing is on the outer ring.Generally, the inner and outer rings cannot be separated, and can bear the combined radial and axial load and the axial load in one direction.The ability to bear axial load is determined by the contact angle.The larger the contact angle, the higher the ability to bear axial load.Angular contact ball bearings are mainly divided into single row angular contact ball bearings and double row angula

Single row angular contact ball bearings mainly used forundertaking combined load both from radius and axle andalso for pure axle load,rotator speed is high.Material of bearings is choosed on refining bearing steelGCr15 (100Cr6，SUJ2,S2100) and other type of bearingsteel,balls are adopting GCr15 (100Cr6，SUJ2,S2100) orceramic. The bearings are classified as 7000C (15°)70000AC(25°)、7000B (40) in accordance with theircontact angle,other bearings with different contact angular areavailable on request.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)G

High Rigidity and Stability: miniature angular contact bearings maintain their shape and rigidity when subjected to heavy loads, contributing to enhanced system stability and reduced risk of deformation.Optimized Lubrication Performance: They possess exceptional lubrication characteristics, reducing friction and wear between components, thus extending the bearing's lifespan and ensuring smooth operation.Versatility in Applications: axial angular contact ball bearing are adaptable to various environmental conditions, temperatures, and work environments, making them suitable for a wide range

Double row angular contact ball bearings can bear large radial loads, mainly radial and axial combined loads and torque loads, limiting the axial displacement of both sides of the shaft.

A single-row tapered roller bearing has an outer ring, and its inner ring and a group of tapered rollers are enclosed by a basket cage into an inner ring assembly, and the outer ring and the inner ring assembly can be separated. In addition, single-row tapered roller bearings can adjust the size of the clearance during installation.

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis, which means that they are designed to accommodate combined loads, i.e. simultaneously supporting radial and axial loads.The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle.

Angular contact ball bearings are of a non-separation design, and the shoulders on both sides of the inner and outer rings are not high or low. In order to increase the load capacity of the bearing, the shoulder on one side is machined lower, so that the bearing can fit more steel balls.Single row angular contact ball bearings can only withstand one direction of the axial load, in the radial load, will cause additional axial force, must apply the corresponding reverse load, therefore, this kind of bearings are generally used in pairs.

High load capacity: Thanks to the angular contact design, NTN angular contact ball bearings perform well in terms of load capacity and are suitable for high-speed operation and high-power transmission.High precision: NTN angular contact ball bearings are manufactured with high precision, which can ensure their stability, low noise and high performance during operation.High temperature resistance: NTN angular contact ball bearings are usually made of high temperature wear-resistant materials, which can maintain good operating performance in high temperature environments.High speed: NTN angular

Retentors, usually made of steel or synthetic materials, are used to hold rolling elements in position, ensuring that they maintain the correct clearance and position relationship with each other during use.Single-row angular contact bearings are suitable for all kinds of rotating machinery, such as automobile wheels, motors, fans, etc., which can withstand high-speed operation and large loads.When installing, it is necessary to pay attention to the cleaning and lubrication of the bearing to ensure its performance and life.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter

Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction.The type code of tapered roller bearings is 30,000, and tapered roller bearings are separable bearings.

NTN angular contact bearing is a commonly used bearing type with excellent load bearing performance and stable rotation accuracy. This kind of bearing is usually composed of inner and outer rails and steel balls and other components, and is suitable for various mechanical equipment and transmission systems. The structural design of NTN angular contact bearings is called the contact Angle, which has the ability of the inner and outer rings to withstand radial and axial loads.

Angular contact thrust ball bearings consist of an inner, outer ring, cage, steel ball and groove, and an inner/outer ring with a spherical surface, which can withstand unidirectional and bidirectional axial loads and slight radial loads.

We are an authorized dealer of KOYO bearings. KOYO is a leading manufacturer of almost all types of bearings. We offer a full range of KOYO bearings at very competitive prices, including koyo wheel bearings, koyo ball bearings, koyo needle bearings, koyo roller bearings, koyo thrust bearings and koyo eccentric bearings.

Product Description:The thickness of the zinc layer of the half-inch galvanized steel sheet can reach about 50-100 microns per side, which makes it able to withstand external forces such as pressure, impact force and shear force, and is suitable for engineering projects and industrial applications with high material strength requirements.Product Manufacturing Process:Chemical degreasing → hot water washing → water washing → electrolytic degreasing → water washing → acid washing → rust removal → water washing → electrogalvanizing process → water washing → passivation → hot water washing → dryin

Product Description:It is used in key components such as body structure and bogie of high-speed train. The high strength and good fatigue resistance of 7A04 and 7050 aluminum alloy can ensure the stability and safety of the train body when high-speed trains are confronted with huge air resistance, vibration and complex mechanical loads generated by high-speed running.

Tapered curler bearing refers to the radial thrust kind rolling bearing whose rolling physique is a tapered roller. There are small cone angles and giant cone angles. The small cone Angle usually bears the radial and axial mixed hundreds ordinarily primarily based on radial loads, regularly used in double, reverse installation, the internal and outer seat rings can be established respectively, and the radial and axial clearance can be adjusted throughout set up and use.

Linear motion bearing is a linear motion system produced at a low cost for use with unlimited travel and cylindrical shafts. Because the bearing ball is in point contact with the shaft, the load is small. The steel ball rotates with very little friction resistance, thus achieving smooth motion with high precision. Linear motion bearing metric and Imperial series: Standard type (LM/LME/LMB... UU), adjustable (LM/LME... UUAJ), Open (LM/LME... UUOP); Extended (LM/LME... LUU); Flange type (LMF/LMK/LMH... UU, LMEF/LMEK... UU), flange extension (LMF/LMK/LMH... LUU, LMEF/LMEK...

The ball screw pair has the characteristics of high precision, reversibility and high efficiency, which is the further extension and development of the ladder screw, and the important significance of this development is to change the sliding action of the ladder screw into a rolling action.