70*125*24mm Insulated Deep Groove Ball Bearing-manufacture,factory,supplier from China

The insulated bearing adopts a special spraying process to spray high-quality coating on the outer surface of the bearing. The coating has strong adhesion to the substrate and good insulation performance, which can avoid the electric corrosion of the bearing by the induced current, prevent the damage of the current to the grease, the rolling element and the raceway, and improve the service life of the bearing. The process is constantly improving. In insulated bearings, the outer ring or inner ring surface has a layer of 100μm thick coating, which can withstand voltages up to 1000V DC.

Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance. This kind of bearing has the advantages of small friction coefficient, high limit speed, simple structure, low manufacturing cost and easy to achieve high manufacturing accuracy.Deep groove ball bearings mainly include the following common types:1. Open deep groove ball bearing2. Deep groove ball bearings with a stop groove in the outer ring3. Deep groove ball bearing with dust cover4.

Single row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with dust cover and sealing ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringSingle row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with seal ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringDeep groove ball bearing is the most representative rolling bearing, widely used.

NACHI bearing deep groove ball bearings with dust cover and deep groove ball bearings with sealing rings have been filled with appropriate grease during assembly, should not be heated or cleaned before installation, do not need to lubricated during use, adapt to the operating temperature between -30℃ and +120℃.Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance.

The process has been continuously improved, and in insulated bearings, there is a coating 100μm thick on the surface of the outer or inner ring, which can withstand voltages up to 1000 V DC.

 Deep Groove Ball Bearings Deep Groove Ball Bearings are highly versatile and extensively used in various industries due to their ability to support higher radial loads and moderate axial loads.

Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types  1 Type: Single row deep groove ball bearings,Stainless steel deep groove ball bearings,Single row deep groove ball bearings with filling slots,Double row deep groove ball bearings 2.

The deep groove ball bearing with dust cover and sealing ring has been filled with appropriate grease during assembly, and should not be heated or cleaned before installation. No further lubrication is required during use, and the operating temperature is between -30 ° C and +120 ° C.NSK deep groove ball bearings generally consist of two bearing rings with complete raceways. The rolling element is mounted between the rings and rolled on the raceway. The rolling parts can be balls, cylindrical rollers, needle rollers, tapered rollers, or barrel rollers.

1. Deep groove ball bearing with dust coverDeep groove ball bearings with dust cover are divided into Z type and 2Z type. When used under environmental conditions where lubrication is difficult or lubricating oil is inconvenient, the bearing interior is usually injected with anti-rust and lubricating dual-purpose lithium based grease, and the lubrication amount is 1/4 to 1/3 of the bearing internal space.2.

NTN deep groove ball bearing is a common rolling bearing, widely used in various mechanical equipment and industrial fields. The deep groove ball bearing consists of an inner ring, an outer ring, a ball and a cage, and is designed to withstand radial and axial loads and maintain stable operation at high speeds. The structure, performance and application characteristics of NTN deep groove ball bearings will be introduced in detail below.

FAG bearings-Deep groove ball bearings are the most popular of all ball bearing types because they have a variety of seals, dust caps, and stop ring arrangements to choose from. The groove of the bearing ferrule is an arc, slightly larger than the radius ball of the bearing ring.FAG bearings are a very famous brand.

Application: NTN deep groove ball bearings are widely used in automobiles, motorcycles, power tools, motors, pumps, fans, transmission devices and other mechanical equipment and industrial fields. Its reliable performance and high-quality materials make it an indispensable and important part of industrial equipment.In summary, NTN deep groove ball bearings have the characteristics of reasonable structure, excellent performance and wide application, and are suitable for mechanical equipment in a variety of industrial fields, providing stable and reliable support for equipment operation.

Deep groove ball bearings are available in a variety of sizes and are the most popular of the rolling bearings. This type of bearing supports radial load and a small degree of axial load in both directions simultaneously. Deep groove ball bearings are popular due to their versatility, affordability, and capability to run at high speeds. Most bearings in the 6000 series up to 60mm bore can be made available in stainless steel (AISI 440C material) upon request. 

Deep groove ball bearings are the most commonly used rolling bearings. Its structure is simple and easy to use. It is mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has a certain angular contact ball bearing performance and can bear the combined radial and axial load.

Performance characteristics:High load capacity: NTN deep groove ball bearings can withstand large radial and axial loads, suitable for a variety of mechanical equipment working conditions.High speed: the bearing structure is reasonable, the friction is small, can adapt to high-speed operation, to ensure the stability of the machine equipment.Low noise: NTN deep groove ball bearing manufacturing precision, smooth internal processing, smooth running, low noise.Long life: The use of high-quality bearing steel and excellent heat treatment process, with a long service life and good wear resistance.

Product Description:The density of 316 aluminum plate is relatively small, about 2.7g/cm³, which is much lighter than some steel and other metal materials, and has important application value in aerospace, automobile manufacturing and other industries that have strict requirements for weight.

Product Description:The relatively low carbon content of Q295A steel makes the steel have good welding performance, which is convenient for site construction, and can be used to make the frame structure of the workshop, such as beams, columns, etc., and quickly build the main structure of the workshop.Product Namecarbon steel plate/sheet StandardASTM   A285, ASTM A283, SA516, SA517, EN10025-2-2004, ASTM A572, ASTM A529, ASTM  A573ASTM A633, JIS G3101-2004, ASTM A678 ASTM A588, ASTM A242,etcMaterialA36,SS400,A283   Gr.A,.Gr.B.Gr.C,A285 Gr.A,.Gr.B.Gr.C,Q235,Q195,Q215,Q34

Needle roller bearing is a common rolling bearing, using needle roller as the rolling body, can withstand the radial and axial load.Structure: Needle roller bearings are mainly composed of outer ring, inner ring, needle roller, cage and seal. The shape size of the needle roller bearing is small, saving space, suitable for limited space design.

The sealing and protection of truck bearings are also very important. Trucks often drive in a variety of harsh road conditions, bearing in dust, water vapor and chemicals and other corrosive environment. In order to extend the life of the bearing, it is necessary to take into account the sealing property in the design, and select the appropriate sealing material and structure.Truck bearings also have certain requirements on installation and maintenance. Proper installation and proper lubrication are the keys to ensure the normal operation of truck bearings.

Ceramic materials have excellent wear resistance, corrosion resistance, high temperature resistance, low temperature resistance, high hardness, high strength, low expansion coefficient, electrical insulation, no magnetic conductivity and other excellent characteristics.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)706C–6176————0.006707C360177196————0.006708C360188227————0.014709C360199247————0.016723C360233104––––0.002724C360244135————0.014725C360255165————0.0047726C360266

Product Description:3003 aluminum rod is the main material of building doors and Windows, curtain wall frame. Its good corrosion resistance and machinability make the doors and Windows and curtain walls produced not only beautiful, but also durable.

Railway Bearings play an important role in both passenger and goods transport.  They have to withstand heavy loads: they work at high speeds, under a great weight, are  Rolling bearings in railway gearboxes must withstand a wide variety of operating conditions and complex environmental influences. Not only are high static and, in particular, dynamic loads present in the form of vibrations and shocks, but the rolling bearings are also operated intermittently below the permissible minimum load.

Applications: Cross roller bearings are widely used in many fields, including machine tools, engineering machinery, medical equipment, food packaging machinery, etc. On machine tools, cross roller bearings are often used to support the spindle and the turntable to ensure the high-speed and high-load operation of the equipment.

The insulated bearing is a specially designed bearing whose internal structure can effectively isolate the external environment and prevent conductive and conductive heat. Insulated bearings are usually used in special industrial environments or in equipment requiring special protection.Structure composition: The insulated bearing is composed of an inner ring, an outer ring, a rolling body, a cage and a seal.