6206 Ball Bearing-manufacture,factory,supplier from China

FAG bearings are widely used.Including bicycles, food and beverage industries, electrical appliances, furniture industries, chemical and electroplating industries, paints and dyes, textile industries, automobiles, motorcycles, pumps, fans, water treatment, pharmaceutical industries and many other industrial applications.We can provide FAG deep groove ball bearings, tapered bearings, etc.If you need FAG bearings, please feel free to contact us.NameModelTitleFAG 3205 Bearings3205Original Fag Made In Germany angular contact ball bearing 3200 3201 3202 3203 3204 3205FAG 3210 Bearings3210

When the rotary help bearing is working, the internal and outer rings recognize relative rotation thru the aggregate of rolling elements. When the exterior pressure acts on the bearing, the load is transmitted to the internal and outer rings, and is transmitted to every different via the rolling element, attaining the carrying capacity.

The ball screw pair has the characteristics of high precision, reversibility and high efficiency, which is the further extension and development of the ladder screw, and the important significance of this development is to change the sliding action of the ladder screw into a rolling action.

Advantage of 7020C BearingWhen using the bearing, pay attention to make the raceway on one side without ball loading notch bear the main load.The locking port of this kind of bearing is on the outer ring.Generally, the inner and outer rings cannot be separated, and can bear the combined radial and axial load and the axial load in one direction.The ability to bear axial load is determined by the contact angle.The larger the contact angle, the higher the ability to bear axial load.Angular contact ball bearings are mainly divided into single row angular contact ball bearings and double row angula

Single row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with dust cover and sealing ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringSingle row deep groove ball bearingSingle row deep groove ball bearing with dust coverSingle row deep groove ball bearing with seal ringA single row deep groove ball bearing with a stop groove and a stop ring on the outer ringDeep groove ball bearing is the most representative rolling bearing, widely used.

NACHI bearing deep groove ball bearings with dust cover and deep groove ball bearings with sealing rings have been filled with appropriate grease during assembly, should not be heated or cleaned before installation, do not need to lubricated during use, adapt to the operating temperature between -30℃ and +120℃.Deep groove ball bearing is the most representative rolling bearing, widely used. Suitable for high and even extremely high speed operation, and very durable, no frequent maintenance.

First, the inner and outer rings of flange bearings are usually made of high-quality steel after heat treatment to improve their hardness and wear resistance. The inner ring is a component mounted on the shaft, and the outer ring is fixed on the seat hole. The two components are connected and supported by a rolling element and a cage.The rolling body is a very important part of the bearing, usually made of steel, by the different shape of the rolling body can be divided into rolling son, needle roller, ball and roller.

Linear motion bearing is a linear motion system produced at a low cost for use with unlimited travel and cylindrical shafts. Because the bearing ball is in point contact with the shaft, the load is small. The steel ball rotates with very little friction resistance, thus achieving smooth motion with high precision. Linear motion bearing metric and Imperial series: Standard type (LM/LME/LMB... UU), adjustable (LM/LME... UUAJ), Open (LM/LME... UUOP); Extended (LM/LME... LUU); Flange type (LMF/LMK/LMH... UU, LMEF/LMEK... UU), flange extension (LMF/LMK/LMH... LUU, LMEF/LMEK...

Angular contact ball bearings are of a non-separation design, and the shoulders on both sides of the inner and outer rings are not high or low. In order to increase the load capacity of the bearing, the shoulder on one side is machined lower, so that the bearing can fit more steel balls.Single row angular contact ball bearings can only withstand one direction of the axial load, in the radial load, will cause additional axial force, must apply the corresponding reverse load, therefore, this kind of bearings are generally used in pairs.

We are authorized distributors of FAG bearings. FAG is a leading manufacturer of almost all types of bearings. We can provide most of the bearing products in the FAG bearing catalogue.

Product Description:The yield strength of AH36 carbon steel is not less than 355MPa, and the tensile strength is between 490-620 mpa.

Double-row tapered roller bearings have many advantages in structure and performance, so they are widely used in industrial production.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)Grease lubrication speed (r/min)Oil lubrication speed (r/min)Weight (kg)302027202E15351114.913.412000160000.053302037203E17401220.821.89000120000.079302047204E20471428.230.58000100000.126302057205E25521532.237700090000.154302067206E306217.543.250.5600075000.231302077207E35721754.263.5530067000.331302087208E4080186374500063000.422302097209E45851967.883.5450056000.474

Drive pinion: steeply angled tapered roller bearings, which reduce frictional moments and allow for increased rotational speeds.Hub Bearings – Rear Axle: Tapered roller bearings with an optimized internal design to limit edge loads caused by axle deflection and heavy loads.Hub bearing – front axle: Thin angular contact ball bearing improves rigidity in a narrow space.Gearboxes: High performance deep groove ball bearings TMB/TAB for increased service life or downsizing (downsizing) with the same service life as larger bearings.Final reduction planetary gears: There is a large selection of cage

Single direction thrust ball bearings:consist of two washers with raceways and balls guided b a cage. Washers have flat seating surfaces, and that is why they must be supported so that all balls can be evenly loaded. Bearings carry the axial load only in one direction. They are not able to carry radial forces. Double direction thrust ball bearings:have two cages with balls between the central shaft washer and two houding washers with flat seating surfaces. The shaft washer has raceways on both sides and is fixed on the journal.

Bearing seat is an important part of supporting and fixing bearing, and its processing technology design directly affects the accuracy, life and reliability of bearing seat. Bearing housing is usually made of high-strength alloy steel or cast iron to meet its requirements for high load and wear resistance. Secondly, the design of the process flow is the core of the bearing seat processing technology. Usually, the processing of the bearing seat includes casting, roughing, finishing, heat treatment, surface treatment and other links.

1.Needle roller bearings for stamping outer rings. There are two kinds of bearings: perforated type and sealed type. The needle roller bearing has no inner ring, and the needle roller directly contacts the surface of the shaft, so the processing accuracy and heat treatment hardness of the shaft should be the same as that of the bearing inner ring.2. Solid ring needle roller bearings solid ring needle roller bearings, commonly used solid ring needle roller bearings are NA type and RNA type.3. Roller needle bearing4. Needle roller and cage assembly.

Product Description:5052 aluminum alloy sheet/sheet is used for some non-critical structural components of the car body, such as the door inner plate, the engine hood inner plate, etc.

Ball bearing with eccentric locking collar is  outer diameter in spherical surface,internal construction is the same as deep groove ball bearings of 6200 6300 series.they both can sustain radial and axial loads.We can supply full series of UC200,UC300,SA200,SB200,UEL200,UK200,SER200,CS200,UC300 series bearings.Such bearings are often used in severe operating conditions where they are exposed to dirts,moisture and high temperature.thus,insert ball bearing are usually with grease groove and oil hole on outer ring,at suitable time,we need to replace fresh grease to secure full performance an

Tapered roller bearings are a type of bearing widely used in industrial fields. In the industry, tapered roller bearings are mainly used in machinery and automobiles, such as pharmaceutical equipment, hydraulic machinery, machine tools, automotive differentials, etc. These mechanical equipment are used in a mix of dynamic and static loads, there are different friction factors in the environment.

Product Description:Manufacture a variety of mechanical structural components, such as machine workbench, robot arms, etc.

In the design of truck bearings, the bearing capacity must first be considered. Trucks usually carry a large amount of cargo, so bearings must be able to support the overall weight of the vehicle and withstand the impact caused by uneven roads. In order to improve the bearing capacity, larger sizes, more rolling elements and stronger materials are usually used to manufacture bearings.Second, wear resistance is another important consideration in truck bearing design.

Product Description:The thickness specifications of CSB galvanized steel coil are diverse, and the thinner thickness is suitable for some products that are more sensitive to weight and cost and do not need to bear too much pressure, such as internal shielding covers of electronic equipment, small packaging boxes, etc.

Product Description:6063 aluminum coils are used in the manufacture of train cars for components such as window frames, door frames, interior armrests and trim strips. Its corrosion resistance can be adapted to the environment of long-term train operation, including different climatic conditions and frequent cleaning operations.

Product Description:5052 aluminum alloy coil can be used to manufacture high-precision, high-strength die casting mold, injection mold and so on.