6204 2z Bearing-manufacture,factory,supplier from China

1. Deep groove ball bearing with dust coverDeep groove ball bearings with dust cover are divided into Z type and 2Z type. When used under environmental conditions where lubrication is difficult or lubricating oil is inconvenient, the bearing interior is usually injected with anti-rust and lubricating dual-purpose lithium based grease, and the lubrication amount is 1/4 to 1/3 of the bearing internal space.2.

When the rotary help bearing is working, the internal and outer rings recognize relative rotation thru the aggregate of rolling elements. When the exterior pressure acts on the bearing, the load is transmitted to the internal and outer rings, and is transmitted to every different via the rolling element, attaining the carrying capacity.

CAM bearing is a mechanical device used to drive camshaft, its main role is to achieve effective transmission and support between camshaft and other components in the engine. CAM bearings are usually made of metal materials and are subjected to greater pressure and friction in high-speed engines. The design and quality of CAM bearing directly affect the performance and life of engine.CAM bearings usually include camshaft, shaft sleeve, needle roller, steel ball and other components.

Linear bearings with flanges Performance: Linear bearings are a linear motion system produced at a low cost for use with unlimited travel and circular shafts. Because the bearing ball is in contact with the shaft dry point, the load is small. The steel ball rotates with very little friction resistance, thus achieving smooth motion with high precision.Flanged linear bearing series Specification classification :LME, LMK series LMH series LMFP, LMKP series with flanged linear bearing LMHP series with flanged linear bearing LME.LLMK.L series LMH.L series LMFP...

The raceway with the inclination Angle enables the tapered roller bearing to bear the combined radial and axial loads. The greater the Angle between the outer raceway and the bearing center line, the greater the ability to withstand the axial and radial load ratio. The linear contact between the roller and the raceway makes the tapered roller bearing have a great load bearing capacity. This feature and the ability to withstand radial loads, axial loads and both combined loads make tapered roller bearings ideal for many applications.

Product Description:12-foot galvanized roofing panels have unique advantages in agricultural applications due to their longer dimensions.

Bearing unit includes1. Double row angular contact ball bearings, from automotive hub bearings series a high load capacity, high roll stiffness, double sealCorrosion protection machined bearing housing2. Threaded pin with positioning surface3. Lock washer4. There are high-performance three-lip box seals on both sides of the bearing to prevent pollution.

Thrust roller bearings are used to bear axial and radial combined loads based on axial loads, but the radial load shall not exceed 55% of the axial load.

Product Description:14-foot galvanized roofing board is suitable for shopping centers and commercial complexes, hotel buildings, school buildings, etc., can cover a large area, reduce the joint, make the roof appearance more beautiful.

Product Description:Because the 4104 aluminum rod has good thermal conductivity, it can be used to manufacture radiators for electronic equipment, such as computer graphics card radiators, server radiators, etc.

Single row angular contact ball bearings mainly used forundertaking combined load both from radius and axle andalso for pure axle load,rotator speed is high.Material of bearings is choosed on refining bearing steelGCr15 (100Cr6，SUJ2,S2100) and other type of bearingsteel,balls are adopting GCr15 (100Cr6，SUJ2,S2100) orceramic. The bearings are classified as 7000C (15°)70000AC(25°)、7000B (40) in accordance with theircontact angle,other bearings with different contact angular areavailable on request.New domestic modelsOld domestic modelInner diameter (mm)Outer diameter (mm)Width(mm)Cr(kN)Cor(kN)G

The series of products with flanges on the outer wheel make the axial positioning easy; The bearing seat is no longer needed and becomes more economical. In order to obtain low friction torque, high rigidity and good rotation accuracy of bearings, steel balls with small outer diameter are used. The use of hollow shafts ensures lightweight and wiring spaceThe biggest feature is that the flange and the bearing are integrated.

Miniature Flanged Ball Bearing are simple structure and easy to use, are the most widely application bearing, mainly used to support radial load.  This kind of bearings with small friction coefficient, low noise, high speed limit, but is not able to bear impact strike, not suitable for a heavy load.  According to the user's requirements, we can provide high precision (P6 ,P5), all kinds of clearance and vibration noise level (Z1 and Z2 or V1, V2) bearing.The flanged bearing enables the bearings to be axially located in the housing, such an arrangement is very simple in design and

The working principle of needle roller bearings is to use rolling friction to reduce friction and resistance. When the bearing is subjected to axial or radial load, the needle roller rolls between the inner and outer rings, thereby reducing friction and resistance.

Construction machinery bearing is a mechanical component used to support and turn rotating parts. In construction machinery, bearings usually carry high-speed rotating parts, such as engines, transmission systems, etc. Bearings usually consist of an inner ring, an outer ring, a rolling element and a retainer.There are many types of construction machinery bearings, including rolling bearings and plain bearings. Rolling bearings reduce friction and improve rotation efficiency by rolling rolling elements (such as spheres, rollers or cylinders) between the inner and outer rings.

UCF210-113D1 Pillow Block Bearing / Pillow Housings: Supplied with a fully sealed bearing insert fitted in the housing and includes a grease nipple to facilitate re-lubrication. The bearing insert has 2 grub screws to allow tightening against the shaft once fitted.

The main role of wheel bearings is to bear the weight and provide precise guidance for the rotation of the wheel, which is subject to both axial and radial loads. Traditionally, bearings for automotive wheels are made of two sets of tapered roller bearings or ball bearings combined, and the mounting, oiling, sealing and clearance adjustment of the bearings are carried out on the automotive production line.

Flange slide bearing has the features of Low friction coefficients and long usage spans, High temperature, self-lubricated, anti-corrosion. Using feature: Linear bearings are used widely in electronic equipment, pull tester and digital three-dimensional coordinate measuring device.  Such as precision equipment, as well as multi-axis machine tools, press tool, grinder automatic gas cutting machine, printer, card sorting machine, food packaging machine and other industrial machinery sliding components...

As a kind of high-precision, high-strength, high-speed parts, automobile bearings have an absolute linking role, especially in the automobile chassis, engine, gearbox, brake disc, suspension, etc. There are a lot of bearings, so the life expectancy And quality is also a topic of concern to most people.After all, driving safety is more than everything. As a mainstream trend now, new energy vehicles are naturally very concerned about lightweight bearings.Bearings of new technology have also put forward new standards for high temperature resistance, high speed and light weight.

1.Thrust cylindrical roller bearings are often combined into high-stiffness bearing configurations, which can withstand heavy loads and vibration loads without difficulty.2. this kind of bearing can bear a large axial load in a single direction, but can not bear radial load, they do not have automatic aligning ability.3. the thrust cylindrical roller bearing can be divided into thrust cylindrical roller and cage assembly, shaft ring and seat ring.4.

Loaders: Loaders are used to load and unload various materials, and their working conditions require the wear and impact resistance of bearings. Cylindrical roller bearings or bi-directional thrust ball bearings that are resistant to high speed work are usually used on loaders.Cranes: Cranes are used to lift and move heavy goods and are required to withstand high tensile and compressive loads.

Iko is a well-known company specializing in the production of various types of bearing products, and its tapered roller bearings are one of its product series. Tapered roller bearing is a common type of bearing, mainly used in mechanical transmission fields, such as automotive, aerospace, engineering machinery and other fields.Iko tapered roller bearings have the following characteristics: First, the structural design is reasonable, mainly composed of inner ring, outer ring, roller and cage.

The outer diameter (OD) of the cam follower (stud or yoke) can be the standard cylindrical shape or be crowned. Crowned cam followers are used to keep the load evenly distributed if it deflects or if there is any misalignment between the follower and the followed surface. They are also used in turntable type applications to reduce skidding. Crowned followers can compensate for up to 0.5° of misalignment, while a cylindrical OD can only tolerate 0.06°. The only disadvantage is that they cannot bear as much load because of higher stresses.

Bearing performance: The bearing capacity of cross roller bearings is large, suitable for high-speed and high-load applications. Due to the special arrangement of rollers, the bearing can share part of the load when bearing radial and axial loads, which improves the bearing capacity and stability.